SKU:108308
Amadesa
Argentium® Silver Round Wire
Delivery time: 3–5 weeks
Estimated arrival: Oct 20, 2026 – Nov 03, 2026
Kunde inte ladda upp tillgänglighet för hämtning
Med en liten mängd germanium är denna rundtråd av dödmjuk Argentium®-silver mycket motståndskraftig mot glödskal och mindre benägen att oxidera än sterling. Den är smältbar och går även utmärkt att löda. (Vid lödning eller smältning, använd Ronda Coryells Purple Flux för mindre bubbelbildning.) Dödmjuk tråd är lätt att böja, forma och hamra. Tänk på att hårdheten kan ändras genom glödgning, värmehärdning eller kallbearbetning. Att arbeta med Argentium skiljer sig något från att arbeta med traditionellt sterling. Om du är ny på Argentium® kan du bläddra ned eller besöka vårt resurscenter för att hitta massor av vägledning som hjälper dig att dra nytta av alla fördelar som detta material erbjuder! Tråden levereras i spolar. Finns i valfria längder, med en minsta vikt på 0.01 ozt. Om du klickar på ”Lägg i varukorgen” för en mängd som understiger detta, visas en uppmaning som hindrar dig från att beställa.
Made with a touch of Germanium, this dead-soft Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Dead-soft wire is easy to bend, shape and hammer. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Made with a touch of Germanium, this dead-soft Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Dead-soft wire is easy to bend, shape and hammer. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Made with a touch of Germanium, this dead-soft Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Dead-soft wire is easy to bend, shape and hammer. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Made with a touch of Germanium, this ½-hard Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Metal that is 1/2-hard is partially work-hardened and will hold its shape under some stress. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening. To avoid annealing, use this wire only after soldering.
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this dead-soft Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Dead-soft wire is easy to bend, shape and hammer. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Made with a touch of Germanium, this ½-hard Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Metal that is 1/2-hard is partially work-hardened and will hold its shape under some stress. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening. To avoid annealing, use this wire only after soldering.
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this dead-soft Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Dead-soft wire is easy to bend, shape and hammer. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Made with a touch of Germanium, this ½-hard Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Metal that is 1/2-hard is partially work-hardened and will hold its shape under some stress. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening. To avoid annealing, use this wire only after soldering.
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this hard, Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Hard wire is significantly work-hardened. It does not bend readily and holds its shape after forming, making it ideal for clasps and hinges. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium® is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this dead-soft Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Dead-soft wire is easy to bend, shape and hammer. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Made with a touch of Germanium, this ½-hard Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Metal that is 1/2-hard is partially work-hardened and will hold its shape under some stress. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening. To avoid annealing, use this wire only after soldering.
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this hard, Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Hard wire is significantly work-hardened. It does not bend readily and holds its shape after forming, making it ideal for clasps and hinges. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium® is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this dead-soft Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Dead-soft wire is easy to bend, shape and hammer. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Made with a touch of Germanium, this ½-hard Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Metal that is 1/2-hard is partially work-hardened and will hold its shape under some stress. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening. To avoid annealing, use this wire only after soldering.
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this hard, Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Hard wire is significantly work-hardened. It does not bend readily and holds its shape after forming, making it ideal for clasps and hinges. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium® is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this dead-soft Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Dead-soft wire is easy to bend, shape and hammer. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Made with a touch of Germanium, this ½-hard Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Metal that is 1/2-hard is partially work-hardened and will hold its shape under some stress. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening. To avoid annealing, use this wire only after soldering.
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this hard, Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Hard wire is significantly work-hardened. It does not bend readily and holds its shape after forming, making it ideal for clasps and hinges. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
The wire is packaged in coils. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium® is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this dead-soft Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Dead-soft wire is easy to bend, shape and hammer. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
This wire is packaged on spools but may be coiled upon request (10-ozt. maximum per coil). Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Made with a touch of Germanium, this ½-hard Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Metal that is 1/2-hard is partially work-hardened and will hold its shape under some stress. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening. To avoid annealing, use this wire only after soldering.
This wire is packaged on spools but may be coiled upon request (10-ozt. maximum per coil). Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this hard, Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Hard wire is significantly work-hardened. It does not bend readily and holds its shape after forming, making it ideal for clasps and hinges. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
This wire is packaged on spools but may be coiled upon request (10-ozt. maximum per coil). Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium® is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this dead-soft Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Dead-soft wire is easy to bend, shape and hammer. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
This wire is packaged on spools but may be coiled upon request (10-ozt. maximum per coil). Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Made with a touch of Germanium, this ½-hard Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Metal that is 1/2-hard is partially work-hardened and will hold its shape under some stress. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening. To avoid annealing, use this wire only after soldering.
This wire is packaged on spools but may be coiled upon request (10-ozt. maximum per coil). Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this hard, Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Hard wire is significantly work-hardened. It does not bend readily and holds its shape after forming, making it ideal for clasps and hinges. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
This wire is packaged on spools but may be coiled upon request (10-ozt. maximum per coil). Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium® is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this dead-soft Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Dead-soft wire is easy to bend, shape and hammer. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
This wire is packaged on spools but may be coiled upon request (10-ozt. maximum per coil). Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Made with a touch of Germanium, this ½-hard Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Metal that is 1/2-hard is partially work-hardened and will hold its shape under some stress. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening. To avoid annealing, use this wire only after soldering.
This wire is packaged on spools but may be coiled upon request (10-ozt. maximum per coil). Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this hard, Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Hard wire is significantly work-hardened. It does not bend readily and holds its shape after forming, making it ideal for clasps and hinges. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
This wire is packaged on spools but may be coiled upon request (10-ozt. maximum per coil). Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium® is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this dead-soft Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Dead-soft wire is easy to bend, shape and hammer. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Packaged on spools to prevent tangling. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Made with a touch of Germanium, this ½-hard Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Metal that is 1/2-hard is partially work-hardened and will hold its shape under some stress. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening. To avoid annealing, use this wire only after soldering.
Packaged on spools to prevent tangling. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this hard, Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Hard wire is significantly work-hardened. It does not bend readily and holds its shape after forming, making it ideal for clasps and hinges. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
This wire is packaged on spools but may be coiled upon request (10-ozt. maximum per coil). Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium® is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this dead-soft Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Dead-soft wire is easy to bend, shape and hammer. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Packaged on spools to prevent tangling. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Made with a touch of Germanium, this ½-hard Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Metal that is 1/2-hard is partially work-hardened and will hold its shape under some stress. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening. To avoid annealing, use this wire only after soldering.
Packaged on spools to prevent tangling. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Made with a touch of Germanium, this dead-soft Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Dead-soft wire is easy to bend, shape and hammer. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Packaged on spools to prevent tangling. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Made with a touch of Germanium, this ½-hard Argentium® Silver round wire is highly resistant to firescale and less likely to tarnish than sterling. It's fusible and it also solders beautifully. (When soldering or fusing use Ronda Coryell's Purple Flux for less bubbling.)
Metal that is 1/2-hard is partially work-hardened and will hold its shape under some stress. Keep in mind that hardness is changeable by annealing, heat-hardening or work-hardening. To avoid annealing, use this wire only after soldering.
Packaged on spools to prevent tangling. Available in custom cuts of any length, with a minimum weight of 0.01 ozt. If you click 'Add to Cart' for a quantity less than this, a prompt will prevent you from ordering.
Working with Argentium is a bit different than working with traditional sterling. If you are new to using Argentium®, scroll down or visit our Resource Center to find lots of guidance to help you reap all the benefits this material has to offer!
Specifications
- Country of origin:
- United States
- Dimensions:
- 3.26mm
- Dimensions mm:
- 3.26mm
- Form:
- Wire
- Gauge:
- 8 ga.
- Hardness:
- Dead-soft
- Length per weight:
- 1.21 ft./ozt (36.88 cm/ozt)
- Metal color:
- White
- Metal type:
- Argentium Silver
- Price per unit:
- Priced per 25.4mm
- Purity:
- .940
- Shape:
- Round
- Thickness:
- 0.128" (3.25mm)
- Thickness mm:
- 3.26mm
- Weight per length:
- .828 ozt/ft. (.0272 ozt/cm)
