SKU:117912
GRS
GRS® Slide & Lock Tru-Axis Bench Tool-Holding System
Delivery time: 3–5 weeks
Estimated arrival: Sep 29, 2026 – Oct 13, 2026
Nie można załadować dostępności odbioru
Pracuj wydajniej pod mikroskopem dzięki systemowi GRS® Slide & Lock™ Tru-Axis, zaprojektowanemu przez mistrza jubilerskiego JA, Jeffa Matthewsa. System ten zapewnia dodatkową przestrzeń na mikroskop bez konieczności ponownego ustawiania i regulacji ostrości. Dwa łatwe do chwytu mosiężne uchwyty, z całkowitym pionowym zakresem ruchu 12", zwalniają płytę montażową, pozwalając podnieść lub opuścić wysokość pracy, a następnie blokują płytę w optymalnej pozycji dla każdego zadania. Dodatkowo możesz pracować w ergonomicznej pozycji, minimalizując zmęczenie oczu, szyi i pleców. Pierwszy uchwyt ma do wyboru trzy pozycje (górną, środkową i dolną), oferując 8" zakres ruchu na górnym uchwycie narzędzia. Drugi uchwyt zapewnia 4" zakres ruchu na dolnym uchwycie narzędzia, dzięki czemu możesz go regulować niezależnie. System GRS® Slide & Lock™ Tru-Axis może jednocześnie utrzymać dwa oddzielne narzędzia i wytrzymuje do 35 funtów. Wystarczy poluzować uchwyt z blokadą krzywkową, aby łatwo dostosować płytę suwaka, a następnie zablokować ją na miejscu, aby zabezpieczyć płytę według potrzeb. Odwróć uchwyt, aby dostosować go do użytkowania praworęcznego lub leworęcznego. Slide & Lock™ Tru-Axis montuje się na płycie montażowej GRS® (dostępnej osobno) i jest idealny do użycia z każdym narzędziem mocowanym do stałej płyty montażowej GRS, w tym ze wszystkimi modelami uchwytów BenchMate® oraz akcesoriami takimi jak półka blokowa, kołek stołowy, uniwersalna imadło i inne (wszystkie dostępne osobno). Ważne: Aby bezpiecznie wyregulować płytę suwaka, najpierw podtrzymaj płytę od dołu, następnie poluzuj blokadę krzywkową i podnieś lub opuść płytę suwaka do pożądanej pozycji roboczej (nie podnoś jej za kołek stołowy ani inne narzędzie, ponieważ narzędzie po prostu odpadnie od mocowania). Zablokuj płytę w nowej pozycji przed usunięciem podpory od dołu.
Work more efficiently under a microscope with the GRS® Slide & Lock™ Tru-Axis system, designed by JA Master Bench Jeweler Jeff Matthews. This system provides the additional space to accommodate a microscope without needing to re-adjust and re-focus. Two easy-grip brass handles, with a total vertical travel of 12", release the mounting plate, allowing you to raise or lower the height of your work, then locks the plate in place at the optimal position for each task. In addition, you're able to work in an ergonomic position, minimizing eye, neck and back strain. The first handle has three positions to choose from (top, middle and bottom), offering 8" of travel on the upper tool holder. The second handle provides 4" of travel on the lower tool holder so that you can adjust it independently. The GRS® Slide & Lock™ Tru-Axis system can hold two separate tools at the same time and supports up to 35 pounds. Simply loosen a cam-lock handle to easily adjust the slide plate, then lock it in place to secure the plate as desired. Reverse the handle to accommodate either right- or left-hand use. The Slide & Lock™ Tru-Axis mounts to a GRS® mounting plate (available separately) and is ideal for use with any tool that attaches to the fixed GRS mounting plate, including all BenchMate® holder models and accessories such as the block shelf, bench pin, multi-purpose vise and more (all available separately). Important: To safely adjust the slide plate, first support the slide plate from the bottom, then loosen the cam-lock and raise or lower the slide plate to the desired work position (do not lift from the bench pin or any other tool because the tool will simply lift off of the mount). Lock the plate in its new position before removing the support at the bottom.
Specifications
- Brand:
- GRS
- Country of origin:
- United States
- Dimensions:
- 304 x 152.4 x 50.8mm
- Dimensions mm:
- 152.4 x 50.8mm
- Shipping weight:
- 7.937 lbs (3.6kg)
- Weight:
- 3.6 kg
- Weight kg:
- 3.600
