SKU:602700
Amadesa
10K Yellow Gold Casting Grain
Delivery time: 3–5 weeks
Estimated arrival: Feb 22, 2026 – Mar 08, 2026
Nie można załadować dostępności odbioru
Uzyskaj profesjonalne, powtarzalne wyniki i jasny kolor złota dzięki temu ziarnu odlewniczemu 10-karatowemu. Specjalne dodatki redukują tlenki ogniowe i wspomagają dobrą płynność oraz wypełnienie, co skutkuje gładką powierzchnią odlewu. Formułowane z deoksydantami, dzięki czemu można mieszać 50% złomu odlewniczego z nowym ziarnem odlewniczym i uzyskać dobre rezultaty. Sprzedawane na pennyweight (dwt.), minimalny zakup to 0,2 dwt. Zastosowania Dowolna metoda odlewania. Odlewanie i czyszczenie Ogólnie temperatura odlewania powinna być o 100˚F (37,7˚C) wyższa od punktu liquidusu (nieco wyższa, jeśli odlewy są skomplikowane). Użyj niewielkiej ilości wysokiej jakości topnika podczas topienia otwartym płomieniem. Zalecamy Matt’s Casting Flux™. Do dalszego czyszczenia zalecane są metody mechaniczne. Ponowne użycie Jeśli planujesz ponowne użycie odlewów złota, usuń tlenki miedzi z powierzchni w roztworze trawiącym lub metodami mechanicznymi. Zalecamy minimalny stosunek 1:1 nowego ziarna do używanego złota. Wszystkie ponownie używane złoto powinno być czyste i wolne od zanieczyszczeń. Kompozycja Wszystkie składniki są przechowywane w atmosferze o obniżonej zawartości tlenu podczas procesu topienia i wlewania, aby zapewnić optymalną deoksygenację.
Get professional, repeatable results and a light gold color with this 10-karat gold casting grain.
Special additives reduce firescale and promote good flow and fill, resulting in a smooth cast surface. Formulated with deoxidants so you can mix 50% casting scrap with new casting grain and still get good results.
Sold by the pennyweight (dwt.), minimum purchase is 0.2 dwt.
Applications Any casting method.
Casting and Cleaning In general, your casting temperature should be 100˚F (37.7˚C) above the liquidus point (somewhat hotter if the castings are intricate). Use a small amount of high-quality flux when melting with an open flame. We recommend Matt’s Casting Flux™. For further cleaning, mechanical means are recommended.
Re-Using If you plan to re-use gold castings, remove the copper oxides from the surface in a pickling solution or by mechanical means. We recommend a minimum 1:1 ratio of new grain to used gold. All re-used gold should be clean and free of debris.
Composition All ingredients are kept in an oxygen-reduced atmosphere during the melting and pouring process to ensure optimum deoxidation.
Specifications
- Country of origin:
- United States
- Form:
- Casting grain
- Karat:
- 10K
- Liquidus temperature:
- 1,635°F (891°C)
- Metal color:
- Yellow
- Metal type:
- Gold
- Solidus temperature:
- 1,475°F (802°C)
- Specific gravity:
- 11.5
- Weight:
- 0.000 kg
