SKU:500232
Rio Grande
Rio 180g Dry Mix Potassium Hydroxide Electrolyte Compound for Single-Torch Hydrogen Welding System
Delivery time: 3–5 weeks
Estimated arrival: Sep 29, 2026 – Oct 13, 2026
Kon ophaalbeschikbaarheid niet laden
Dit door Rio Grande ontwikkelde poeder, gemengd met gedestilleerd water, produceert de benodigde elektrolytische oplossing voor het bedienen van het ET Hydrogen lasapparaat met één brander of een vergelijkbare machine. De kaliumhydroxide (KOH) verbinding zorgt voor een efficiëntere chemische reactie, waardoor een hogere output van waterstof en zuurstof wordt geproduceerd. Als u een waterstoflasapparaat gebruikt anders dan het ET Hydrogen systeem met één brander, raadpleeg dan de handleiding van uw apparaat voor de juiste verhouding gedestilleerd water tot elektrolytisch poeder; meng dienovereenkomstig, volg alle instructies en veiligheidsvoorschriften nauwkeurig op, en voeg de oplossing toe aan uw machine. Om uw L-45 systeem met één brander te vullen, meet 1 pint (0,45 liter) gedemineraliseerd (DI) water af. Meet altijd eerst het water af en voeg vervolgens het zuur (KOH poeder) toe aan het water. Voeg de volledige inhoud van het potje (180g KOH) toe aan het water en begin onmiddellijk met roeren. Roer zorgvuldig en grondig, deze reactie genereert warmte. Belangrijk: BEREID de elektrolytische oplossing NIET in de tank van het lasapparaat; deze MOET worden bereid in een plastic of roestvrijstalen container en pas na het mengen aan de tank worden toegevoegd.
This Rio Grande engineered powder, mixed with distilled water, produces the needed electrolyte solution for operating the single-torch ET Hydrogen welding system or comparable machine. The potassium hydroxide (KOH) compound produces a more efficient chemical reaction, producing a higher output of hydrogen and oxygen.
If using a hydrogen welding system other than the ET Hydrogen single-torch system, please consult your owner's manual for the proper ratio of distilled water to electrolyte compound; mix accordingly, following all directions and safety requirements carefully, and add the solution to your machine.
To fill your single-torch L-45 system, measure out 1 pint (0.45 liters) of demineralized (DI) water. Always measure water first and add acid (KOH powder) to the water. Add the entire jar contents (180g KOH) to the water, and begin stirring immediately. Stir carefully and thoroughly, this reaction will generate heat. Important: DO NOT prepare the electrolyte solution inside the tank of the welding system; it MUST be prepared in a plastic or stainless steel container, then added to the tank after mixing.
Specifications
- Brand:
- Rio Grande
- Country of origin:
- United States
- Shipping weight:
- 0.5 lbs (0.227kg)
- Size:
- 180 grams
- Weight:
- 0.227 kg
- Weight kg:
- 0.227
