SKU:500235
Rio Grande
Rio 1080g Dry Mix Potassium Hydroxide Electrolyte Compound for Casting or Four-Torch Hydrogen Weldin
Delivery time: 3–5 weeks
Estimated arrival: Jun 14, 2026 – Jun 28, 2026
Kon ophaalbeschikbaarheid niet laden
Dit door Rio Grande ontwikkelde poeder, gemengd met gedestilleerd water, produceert de benodigde elektrolytoplossing voor het bedienen van het L160 ET Hydrogen gietbrander- of vierbrander-lasapparaat of een vergelijkbare machine. De kaliumhydroxide (KOH) verbinding zorgt voor een efficiëntere chemische reactie, wat resulteert in een hogere output van waterstof en zuurstof. Als u een waterstoflasapparaat gebruikt anders dan het ET Hydrogen gietbrander systeem, raadpleeg dan de handleiding van uw apparaat voor de juiste verhouding gedestilleerd water tot elektrolytcompound; meng dienovereenkomstig, volg alle instructies en veiligheidsvoorschriften nauwkeurig en voeg de oplossing toe aan uw machine. Om uw gietbrander L-160 systeem te vullen, meet 5-1/2 pinten (2,6 liter) gedemineraliseerd (DI) water af. Meet altijd eerst het water af en voeg vervolgens het zuur (KOH-poeder) aan het water toe. Voeg de volledige inhoud van het potje (1080g KOH) aan het water toe en begin onmiddellijk met roeren. Roer voorzichtig en grondig, deze reactie genereert warmte. Belangrijk: BEREID DE ELEKTROLYTOPLOSSING NIET in de tank van het lasapparaat; deze MOET worden bereid in een plastic of roestvrijstalen container en daarna aan de tank worden toegevoegd na het mengen.
This Rio Grande engineered powder, mixed with distilled water, produces the needed electrolyte solution for operating the L160 ET Hydrogen casting-torch or four-torch welding systems or comparable machine. The potassium hydroxide (KOH) compound produces a more efficient chemical reaction, producing a higher output of hydrogen and oxygen.
If using a hydrogen welding system other than the ET Hydrogen casting torch system, please consult your owner's manual for the proper ratio of distilled water to electrolyte compound; mix accordingly, following all directions and safety requirements carefully, and add the solution to your machine.
To fill your casting-torch L-160 system, measure out 5-1/2 pints (2.6 liters) of demineralized (DI) water. Always measure water first and add acid (KOH powder) to the water. Add the entire jar contents (1080g KOH) to the water, and begin stirring immediately. Stir carefully and thoroughly, this reaction will generate heat. Important: DO NOT prepare the electrolyte solution inside the tank of the welding system; it MUST be prepared in a plastic or stainless steel container, then added to the tank after mixing.
Specifications
- Brand:
- Rio Grande
- Country of origin:
- United States
- Shipping weight:
- 3.2 lbs (1.451kg)
- Size:
- 1080 grams
- Weight:
- 1.451 kg
- Weight kg:
- 1.451
