SKU:701465
Formlabs Inc.
Formlabs Form Wash System for Resin Models
Delivery time: 3–5 weeks
Estimated arrival: Jul 21, 2026 – Aug 04, 2026
Kon ophaalbeschikbaarheid niet laden
Reinig na de bouw uw lichtgevoelige 3D-harsmodellen grondig en effectief met het formlabs Form Wash-systeem. De Form Wash-eenheid heeft een tank die groot genoeg is om het maximale volume van uw Form 2- of Form 3-3D-printer te bevatten. De gehele basis schuift op een houder met het model nog op zijn plaats, of het onderdeel (of de onderdelen) kan worden verwijderd en in het draadmandje geplaatst. Een automatisch platform laat het harsstuk (of de stukken) zakken in een bad van isopropylalcohol (IPA; niet inbegrepen), en een kleine, krachtige turbine in de basis creëert een wervelende stroom die elk oppervlak van elk stuk reinigt. Zodra de wasbeurt is voltooid, tilt het platform de onderdelen automatisch uit de tank, waardoor oververzadigde, vervormde stukken worden vermeden. De onderdelen drogen snel aan de lucht en zijn dan klaar voor productie. De Form Wash-eenheid bevat een digitale timer om de wascyclus te regelen, een speciale hydrometer die de alcoholverzadiging bewaakt, een sifonpomp die het gemakkelijk maakt om de IPA af te tappen en te vervangen wanneer nodig, en een ingebouwde opbergmand om afwerkingsgereedschap handig bij de hand te houden.
After the build, clean your light-sensitive 3D resin models thoroughly and effectively using the formlabs Form Wash system. The Form Wash unit offers a tank large enough to hold the maximum-volume grow from your Form 2 or Form 3 3D printer. The entire base slides onto a holder with the grow still in place, or the part (or parts) can be removed and placed in the wire basket. An automatic platform lowers the resin piece (or pieces) into a bath of isopropyl alcohol (IPA; not included), and a small, powerful turbine in the base creates a swirling current that cleans every surface of every piece. Once the wash is complete, the platform automatically lifts the parts out of the tank, avoiding over-soaked, warped pieces. The parts dry quickly in the air and are then ready for production. The Form Wash unit includes a digital timer to control the wash cycle, a custom hydrometer that monitors alcohol saturation, a siphon pump that makes it easy to drain and replace the IPA when needed, and a built-in storage caddy to hold finishing tools conveniently at hand.
Specifications
- Amperage:
- 2 amps
- Brand:
- Formlabs Inc.
- Capacity:
- 18.5 cm (7.28 in)
- Country of origin:
- China
- Dimensions:
- 261.938 x 292.1 x 339.725mm
- Dimensions mm:
- 292.1 x 339.725mm
- Frequency:
- 50/60Hz
- Shipping weight:
- 20 lbs (9.072kg)
- Voltage:
- 110/220 volts (dual)
- Weight:
- 9.072 kg
- Weight kg:
- 9.072
