SKU:701425
HD Pattern
HD Pattern Micro-Injector Kit
Delivery time: 3–5 weeks
Estimated arrival: Aug 12, 2026 – Aug 26, 2026
Nepavyko įkelti paėmimo galimybės
HD Pattern Micro-Injector leidžia patenkinti didesnius gamybos poreikius greitai įpurškiant kelias formas su HD Pattern fotopolimero medžiaga, sukuriant detalius, aukštos raiškos raštus, kurie, išgydyti, yra paruošti medžių formavimui arba naudojimui kaip pagrindiniai modeliai. Injektoriaus kamera talpina vieną butelį HD Pattern Avatar arba Master Copy fotopolimero injekcinio tirpalo ir naudoja suspaustą orą (kompresorius neįtrauktas), kad sklandžiai ir lengvai tiektų tirpalą į jūsų formas. Įdėkite savo HD rašto avatarą arba HD rašto pagrindinę kopiją su fotopolimeriniu tirpalu į kamerą ir įstatykite tiekimo vamzdelį į butelį (žr. „Prašome atkreipti dėmesį“ žemiau). Fotopolimerinis skystis tiekiamas per pistoletinio tipo rankinį prietaisą su įpurškimo antgaliu – pasirinkite antgalį, nuo adatos plonumo iki specialiai formuoto, kuris geriausiai tinka kiekvienam konkrečiam raštui. Labai plonas adatos antgalis leidžia judėti sudėtingų raštų viduje injekcijos metu, padedant užtikrinti visišką užpildymą ir pašalinti bet kokias oro burbuliukus, kurie gali susidaryti. Antgaliai turi Luer-lock pagrindą (panašų į adatą ant hipoderminio švirkšto), kuris sukant užfiksuojamas vietoje, užtikrinant saugų, nepraleidžiantį jungtį ir greitus, efektyvius antgalių keitimus. Suspaustas oras užtikrina sklandų, kontroliuojamą fotopolimero tirpalo tiekimą. Sūkiavimo maišelis (įtrauktas) padeda pašalinti burbuliukus iš formos centrifuginės jėgos pagalba – padėkite formą (vis dar pritvirtintą stiklo plokštelėmis rėmelyje) maišelio apačioje, tada laikykite maišelio viršų ir trumpai sukinėkite (10–15 sekundžių), kad burbuliukai būtų išstumti iš formos. Kartokite tiek kartų, kiek reikia, kad pašalintumėte burbuliukus. Po įpurškimo formą reikia išgydyti, kad procesas būtų baigtas; tam naudokite HD Pattern Firefly™ hiperbarinę slėgio/UV šviesos kietinimo kamerą (parduodama atskirai).
The HD Pattern Micro-Injector allows you to meet higher production needs by quickly injecting multiple molds with HD Pattern photopolymer material, creating detailed, high-definition patterns that, once cured, are ready to tree or to use as master models. The injector chamber holds one bottle of HD Pattern Avatar or Master Copy photopolymer injection solution and applies compressed air (compressor is not included) to deliver the solution smoothly and easily to your molds. Place your HD Pattern Avatar or HD Pattern Master Copy photopolymer solution in the chamber and insert the feed tube into the bottle (see 'Please Note' below). The photopolymer liquid is dispensed through a gun-style handpiece fitted with an injector tip—choose the tip, from needle-fine to specially shaped, that delivers the best result for each specific pattern. A very fine needle tip allows you to move around inside intricate patterns during injection, helping to ensure a complete fill and to remove any air bubbles that may form. Tips feature a Luer-lock base (similar to the needle on a hypodermic syringe) that twist-locks into position to ensure a secure, leak-free connection and quick, efficient tip changes. The compressed air ensures smooth, controlled delivery of the photopolymer solution. The spin bag (included) helps to eliminate bubbles from the mold through centrifugal force—place the mold (still secured by glass plates in the frame) at the bottom of the bag, then hold the top of the bag and spin briefly (10–15 seconds) to force the bubbles out of the mold. Repeat as needed to eliminate bubbles. After injecting, the mold must be cured to complete the process; use the HD Pattern Firefly™ hyperbaric pressure/UV light curing chamber (available separately) for this purpose.
Specifications
- Brand:
- HD Pattern
- Country of origin:
- United States
- Shipping weight:
- 4.68 lbs (2.123kg)
- Weight:
- 2.123 kg
- Weight kg:
- 2.123
