SKU:500232
Rio Grande
Rio 180g Dry Mix Potassium Hydroxide Electrolyte Compound for Single-Torch Hydrogen Welding System
Delivery time: 3–5 weeks
Estimated arrival: Aug 12, 2026 – Aug 26, 2026
Impossibile caricare la disponibilità del ritiro
Questa polvere progettata da Rio Grande, miscelata con acqua distillata, produce la soluzione elettrolitica necessaria per il funzionamento del sistema di saldatura ET Hydrogen a torcia singola o di una macchina comparabile. Il composto di idrossido di potassio (KOH) produce una reazione chimica più efficiente, generando una maggiore quantità di idrogeno e ossigeno. Se si utilizza un sistema di saldatura a idrogeno diverso dal sistema ET Hydrogen a torcia singola, consultare il manuale dell'utente per il rapporto corretto tra acqua distillata e composto elettrolitico; miscelare di conseguenza, seguendo attentamente tutte le istruzioni e le norme di sicurezza, e aggiungere la soluzione alla macchina. Per riempire il sistema L-45 a torcia singola, misurare 1 pinta (0,45 litri) di acqua demineralizzata (DI). Misurare sempre prima l'acqua e aggiungere l'acido (polvere di KOH) all'acqua. Aggiungere tutto il contenuto del barattolo (180 g di KOH) all'acqua e iniziare a mescolare immediatamente. Mescolare con cura e a fondo, questa reazione genererà calore. Importante: NON preparare la soluzione elettrolitica all'interno del serbatoio del sistema di saldatura; DEVE essere preparata in un contenitore di plastica o acciaio inossidabile, quindi aggiunta al serbatoio dopo la miscelazione.
This Rio Grande engineered powder, mixed with distilled water, produces the needed electrolyte solution for operating the single-torch ET Hydrogen welding system or comparable machine. The potassium hydroxide (KOH) compound produces a more efficient chemical reaction, producing a higher output of hydrogen and oxygen.
If using a hydrogen welding system other than the ET Hydrogen single-torch system, please consult your owner's manual for the proper ratio of distilled water to electrolyte compound; mix accordingly, following all directions and safety requirements carefully, and add the solution to your machine.
To fill your single-torch L-45 system, measure out 1 pint (0.45 liters) of demineralized (DI) water. Always measure water first and add acid (KOH powder) to the water. Add the entire jar contents (180g KOH) to the water, and begin stirring immediately. Stir carefully and thoroughly, this reaction will generate heat. Important: DO NOT prepare the electrolyte solution inside the tank of the welding system; it MUST be prepared in a plastic or stainless steel container, then added to the tank after mixing.
Specifications
- Brand:
- Rio Grande
- Country of origin:
- United States
- Shipping weight:
- 0.5 lbs (0.227kg)
- Size:
- 180 grams
- Weight:
- 0.227 kg
- Weight kg:
- 0.227
