SKU:500235
Rio Grande
Rio 1080g Dry Mix Potassium Hydroxide Electrolyte Compound for Casting or Four-Torch Hydrogen Weldin
Delivery time: 3–5 weeks
Estimated arrival: Sep 29, 2026 – Oct 13, 2026
Impossibile caricare la disponibilità del ritiro
Questa polvere progettata da Rio Grande, miscelata con acqua distillata, produce la soluzione elettrolitica necessaria per il funzionamento dei sistemi di torcia da fusione L160 ET Hydrogen o dei sistemi di saldatura a quattro torce o macchine comparabili. Il composto di idrossido di potassio (KOH) produce una reazione chimica più efficiente, generando una maggiore produzione di idrogeno e ossigeno. Se si utilizza un sistema di saldatura a idrogeno diverso dal sistema di torcia da fusione ET Hydrogen, consultare il manuale dell'utente per il rapporto corretto di acqua distillata al composto elettrolitico; mescolare di conseguenza, seguendo attentamente tutte le istruzioni e i requisiti di sicurezza, e aggiungere la soluzione alla macchina. Per riempire il sistema di torcia da fusione L-160, misurare 5-1/2 pinte (2,6 litri) di acqua demineralizzata (DI). Misurare sempre prima l'acqua e aggiungere l'acido (polvere di KOH) all'acqua. Aggiungere tutto il contenuto del barattolo (1080g di KOH) all'acqua e iniziare a mescolare immediatamente. Mescolare con cura e a fondo, questa reazione genererà calore. Importante: NON preparare la soluzione elettrolitica all'interno del serbatoio del sistema di saldatura; DEVE essere preparata in un contenitore di plastica o acciaio inossidabile, quindi aggiunta al serbatoio dopo la miscelazione.
This Rio Grande engineered powder, mixed with distilled water, produces the needed electrolyte solution for operating the L160 ET Hydrogen casting-torch or four-torch welding systems or comparable machine. The potassium hydroxide (KOH) compound produces a more efficient chemical reaction, producing a higher output of hydrogen and oxygen.
If using a hydrogen welding system other than the ET Hydrogen casting torch system, please consult your owner's manual for the proper ratio of distilled water to electrolyte compound; mix accordingly, following all directions and safety requirements carefully, and add the solution to your machine.
To fill your casting-torch L-160 system, measure out 5-1/2 pints (2.6 liters) of demineralized (DI) water. Always measure water first and add acid (KOH powder) to the water. Add the entire jar contents (1080g KOH) to the water, and begin stirring immediately. Stir carefully and thoroughly, this reaction will generate heat. Important: DO NOT prepare the electrolyte solution inside the tank of the welding system; it MUST be prepared in a plastic or stainless steel container, then added to the tank after mixing.
Specifications
- Brand:
- Rio Grande
- Country of origin:
- United States
- Shipping weight:
- 3.2 lbs (1.451kg)
- Size:
- 1080 grams
- Weight:
- 1.451 kg
- Weight kg:
- 1.451
