SKU:107394
Amadesa
14/20 Yellow Gold-Filled Strip, Dead-Soft
Delivery time: 3–5 weeks
Estimated arrival: Dec 11, 2026 – Dec 25, 2026
Impossible de charger la disponibilité du ramassage
Cette bande de sertissage en or jaune laminé 14/20, recouverte d’or sur une seule face et à l’état recuit, est une façon économique d’obtenir juste la quantité de matériau nécessaire dans le calibre souhaité. Elle convient à la fabrication de sertissures sur mesure ou de plus grandes dimensions, ainsi qu’à la réalisation de fonds de sertissage pour les petites pierres. Comme ce matériau est recouvert d’or sur une seule face, la couche d’or est uniquement liée à un côté du métal de base. La bande de sertissage à l’état recuit se plie, se façonne et se martèle facilement. C’est un point de départ idéal pour le formage, le façonnage et le sertissage au fil. Gardez à l’esprit que la dureté peut être modifiée (par recuit ou durcissement thermique) et qu’elle est relative d’un type de métal à l’autre (chaque état de dureté offre une sensation et une maniabilité différentes selon le métal). Pour la finition de vos pièces, gardez également à l’esprit que plus le métal est dur, plus la finition obtenue sera brillante. Ce fil de sertissage en or laminé est conditionné en bobines et peut être coupé à n’importe quelle longueur respectant la quantité minimale du système. Les commandes doivent peser au moins 0.01 ozt. Si vous cliquez sur « Add to Cart » pour une quantité inférieure, le panier affichera un message vous indiquant la quantité minimale pour cet article. Les matériaux en or laminé vous permettent de concevoir et de fabriquer des pièces dans la couleur recherchée de l’or au titre souhaité, tout en restant plus abordables que l’or massif. Leur coût économique permet davantage de liberté pour essayer de nouveaux modèles ou créer des collections de bijoux fantaisie. Comme ce matériau est recouvert d’or sur une seule face, la totalité de l’or est uniquement liée à un côté du métal de base.
This single-clad, dead-soft, 14/20 yellow gold-filled bezel strip is an economical way to get just the right amount of material in the gauge you need, and it is useful for forming custom-shaped or larger bezel mountings or for making bezel backings for small stones. Because this material is single-clad, the gold layer is bonded to one side of the substrate only. Dead soft bezel strip is easy to bend, shape and hammer; it is an ideal starting point for forming, shaping and wire wrapping. Keep in mind that hardness is changeable (by annealing or heat-hardening) and is relative among metal types (each temper will feel and handle differently from one metal to another). When finishing your pieces, also keep in mind that the harder the metal is, the brighter a finish it will take.
This gold-filled bezel wire is packaged in coils and can be cut to any length that satisfies the system minimum. Orders must weigh at least 0.01 ozt.; if you click 'Add to Cart' for a quantity less than this, the cart will offer a prompt to let you know what the minimum for this item is.
Gold-filled materials allow you to design and fabricate using the desirable color of karat gold while preserving a more affordable price point than is possible with solid gold. Its economical cost allows greater latitude for trying out new designs or creating lines of fashion jewelry items. Because this material is single-clad, the total gold weight is bonded to one side of the substrate only.
This single-clad, dead-soft, 14/20 yellow gold-filled bezel strip is an economical way to get just the right amount of material in the gauge you need, and it is useful for forming custom-shaped or larger bezel mountings or for making bezel backings for small stones. Because this material is single-clad, the gold layer is bonded to one side of the substrate only. Dead soft bezel strip is easy to bend, shape and hammer; it is an ideal starting point for forming, shaping and wire wrapping. Keep in mind that hardness is changeable (by annealing or heat-hardening) and is relative among metal types (each temper will feel and handle differently from one metal to another). When finishing your pieces, also keep in mind that the harder the metal is, the brighter a finish it will take.
This gold-filled bezel wire is packaged in coils and can be cut to any length that satisfies the system minimum. Orders must weigh at least 0.01 ozt.; if you click 'Add to Cart' for a quantity less than this, the cart will offer a prompt to let you know what the minimum for this item is.
Gold-filled materials allow you to design and fabricate using the desirable color of karat gold while preserving a more affordable price point than is possible with solid gold. Its economical cost allows greater latitude for trying out new designs or creating lines of fashion jewelry items. Because this material is single-clad, the total gold weight is bonded to one side of the substrate only.
This single-clad, dead-soft, 14/20 yellow gold-filled bezel strip is an economical way to get just the right amount of material in the gauge you need, and it is useful for forming custom-shaped or larger bezel mountings or for making bezel backings for small stones. Because this material is single-clad, the gold layer is bonded to one side of the substrate only. Dead soft bezel strip is easy to bend, shape and hammer; it is an ideal starting point for forming, shaping and wire wrapping. Keep in mind that hardness is changeable (by annealing or heat-hardening) and is relative among metal types (each temper will feel and handle differently from one metal to another). When finishing your pieces, also keep in mind that the harder the metal is, the brighter a finish it will take.
This gold-filled bezel wire is packaged in coils and can be cut to any length that satisfies the system minimum. Orders must weigh at least 0.01 ozt.; if you click 'Add to Cart' for a quantity less than this, the cart will offer a prompt to let you know what the minimum for this item is.
Gold-filled materials allow you to design and fabricate using the desirable color of karat gold while preserving a more affordable price point than is possible with solid gold. Its economical cost allows greater latitude for trying out new designs or creating lines of fashion jewelry items. Because this material is single-clad, the total gold weight is bonded to one side of the substrate only.
This single-clad, dead-soft, 14/20 yellow gold-filled bezel strip is an economical way to get just the right amount of material in the gauge you need, and it is useful for forming custom-shaped or larger bezel mountings or for making bezel backings for small stones. Because this material is single-clad, the gold layer is bonded to one side of the substrate only. Dead soft bezel strip is easy to bend, shape and hammer; it is an ideal starting point for forming, shaping and wire wrapping. Keep in mind that hardness is changeable (by annealing or heat-hardening) and is relative among metal types (each temper will feel and handle differently from one metal to another). When finishing your pieces, also keep in mind that the harder the metal is, the brighter a finish it will take.
This gold-filled bezel wire is packaged in coils and can be cut to any length that satisfies the system minimum. Orders must weigh at least 0.01 ozt.; if you click 'Add to Cart' for a quantity less than this, the cart will offer a prompt to let you know what the minimum for this item is.
Gold-filled materials allow you to design and fabricate using the desirable color of karat gold while preserving a more affordable price point than is possible with solid gold. Its economical cost allows greater latitude for trying out new designs or creating lines of fashion jewelry items. Because this material is single-clad, the total gold weight is bonded to one side of the substrate only.
Specifications
- Country of origin:
- United States
- Dimensions:
- 3.18 x 0.25mm
- Dimensions mm:
- 3.18 x 0.25mm
- Form:
- Strip
- Gauge:
- 30 ga.
- Hardness:
- Dead-soft
- Karat:
- 14/20
- Length per weight:
- 13.89 ft./ozt (423.37 cm/ozt)
- Metal color:
- Yellow
- Metal type:
- Gold-filled
- Price per unit:
- Priced per 25.4mm
- Thickness mm:
- 0.25mm
- Weight per length:
- .072 ozt/ft. (.0024 ozt/cm)
