SKU:503055
Amadesa
Sparkie Fixture for Fusion Lever-Back Ear Wires
Delivery time: 3–5 weeks
Estimated arrival: Mar 03, 2026 – Mar 17, 2026
No se pudo cargar la disponibilidad de recogida
Todos los soldadores por fusión requieren un sistema de sujeción para mantener el terminal de fusión y su pieza de joyería en perfecta alineación para una unión adecuada.
- El sistema en el soldador por fusión Sparkie® II consiste en un portabrocas y un accesorio para asegurar el contacto adecuado durante la soldadura.
- El accesorio es un soporte de trabajo intercambiable que le ayuda a sujetar y posicionar su pieza para soldar.
- Diferentes accesorios están diseñados para acomodar piezas de distintas formas y tamaños para un contacto superficial óptimo.
- El accesorio también actúa como tierra para completar el circuito de soldadura y está conectado a la base del Sparkie mediante un soporte para accesorio; el tamaño del vástago es de 7.9 mm.
- El soporte para accesorio de dos piezas del Sparkie le permite posicionar su accesorio según sea necesario para adaptarse a su pieza de trabajo.
- Humedezca ligeramente los terminales con agua o fundente líquido antes de fusionar para ayudar a reducir las salpicaduras del núcleo de fusión (la pequeña almohadilla en el pin permanece y el núcleo se aplana).
- Este accesorio funciona con el Sparkie original y el soldador por fusión Sparkie II®.
All fusion welders require a clamping system to hold the fusion finding and your jewelry piece in perfect alignment for proper bonding.• The system in the Sparkie® II fusion welder consists of a collet and a fixture to ensure proper contact as the weld is made.• The fixture is an interchangeable work support that helps you hold and position your workpiece for welding.• Different fixtures are designed to accommodate parts of different shapes and sizes for optimum surface contact.• The fixture also acts as a ground for completion of the welding circuit and is connected to the base of the sparkie by a fixture holder; shank size is 7.9mm.• The Sparkie's two-piece fixture holder allows you to position your fixture as needed to suit your workpiece.• Slightly moisten findings with water or liquid flux before fusing to help reduce the splattering of the fusion nib (the small pad on the pin remains and the nib flattens out).• This fixture works with the original Sparkie and the Sparkie II® fusion welder.
Specifications
- Country of origin:
- United States
- Dimensions:
- 6 x 15.8mm
- Dimensions mm:
- 6 x 15.8mm
- Price per unit:
- Priced per Each
- Shipping weight:
- 0.791 ounces (22.421g)
- Weight:
- 0.022 kg
- Weight kg:
- 0.022
