SKU:111198
Amadesa
Italtec Pliers and Cutter Set, 5-Piece
Delivery time: 3–5 weeks
Estimated arrival: Mar 01, 2026 – Mar 15, 2026
No se pudo cargar la disponibilidad de recogida
Cortadas con láser, las mandíbulas de cada una de las herramientas de este set de italtec presentan bordes y contornos de precisión que permiten doblar, curvar y cortar metal y alambre de manera suave y repetible. Sus puntas finas son ideales para alcanzar áreas pequeñas y detalladas. El acabado liso ayuda a reducir el riesgo de dañar piezas delicadas. Las mandíbulas están hechas de acero C70 endurecido a 62 HRC. Los alicates de punta redonda cuentan con mandíbulas redondeadas que se estrechan desde el pivote hasta la punta; son ideales para crear anillas, cierres, espirales y dobleces curvos. Los alicates de punta de cadena tienen mandíbulas semi-redondas con superficies interiores planas, que se estrechan hasta un punto desde el pivote hasta la punta; son ideales para abrir y cerrar anillas, crimpar planos y hacer dobleces angulados. Los alicates de punta de cadena doblada presentan mandíbulas semi-redondas con puntas dobladas perpendicularmente a la articulación, mejorando el alcance y la visibilidad para ciertas tareas. Los alicates de punta plana tienen mandíbulas aplanadas que ofrecen un agarre más amplio sobre los componentes; son ideales para hacer dobleces más amplios y anchos en alambre, conformar metal, enderezar y aplanar metal, hacer dobleces angulados, cerrar garras y sujetar componentes. Los cortadores de cabeza cónica presentan mandíbulas que se estrechan hasta una punta fina, proporcionando mejor acceso a detalles finos o áreas de trabajo cercanas. Los bordes de corte al ras dejan una mínima marca en el metal. Proteja las puntas contra daños cortando en el centro de la mandíbula.
- Las cinco herramientas tienen una articulación de solape, en la que una mitad de la articulación se superpone a la otra, y un tornillo atraviesa ambas mitades. El tornillo permite ajustar la articulación según sea necesario.
- Cada una cuenta con un resorte de doble hoja compuesto por lengüetas planas de metal templado fijadas al interior de cada mango, posicionadas para encontrarse y mantener los mangos separados (y las mandíbulas abiertas) hasta que se aprieten, proporcionando un rebote rápido y fuerte para mejorar la productividad.
- Los mangos de las herramientas italtec son ergonómicos y ofrecen un agarre cómodo mientras reducen la fatiga de la mano y permiten trabajar por más tiempo. Todos los mangos de las herramientas italtec están hechos de Polyemi™ y no contienen látex.
Cut with a laser, the jaws on each of the tools in this set from italtec feature precision edges and contours that deliver smooth, repeatable bends, curves and cuts in metal and wire. Their fine tips are ideal for reaching into small, detailed areas. The smooth finish helps reduce the risk of marring delicate pieces. The jaws are made of C70 steel that is hardened to 62 HRC. The round-nose pliers feature round jaws that taper from the pivot to the tip; they are ideal for creating jump rings, clasps, coils and curved bends. The chain-nose pliers feature semi-round jaws with flat interior surfaces, tapering to a point from the pivot to the tip; they are ideal for opening and closing jump rings, flat crimping and making angled bends. The bent chain-nose pliers feature semi-round jaws with tips that are bent perpendicular to the joint, enhancing reach and visibility for certain tasks. The flat-nose pliers feature flattened jaws that offer a wider grip on components; they are ideal for making wider, broader bends in wire, metal-forming, straightening and flattening out metal, making angled bends, closing prongs and holding components. The tapered-head flush cutters feataure jaws that taper to a fine point, providing improved access to fine details or close work areas. The flush-cutting edges leave a minimal pinch on metal. Protect the tips against damage by cutting at the center of the jaw. • All five tools have a lap joint, in which one half of the joint overlaps the other, and a screw is set through both halves. The screw allows the joint to be adjusted as needed. • Each has a double-leaf spring consisting of flat, tempered metal tabs attached to the inside of each of the tool handles, positioned to meet and hold the handles apart (and the jaws open) until they are squeezed closed, delivering a fast, strong rebound for improved productivity. • Italtec tools handles are ergonomic and provide a comfortable grip while reducing hand fatigue and allowing you to work longer. All Italtec tool handles are made from Polyemi™ and are latex-free.
Specifications
- Brand:
- Italtec
- Country of origin:
- Italy
- Shipping weight:
- 17.813 ounces (505g)
- Weight:
- 0.505 kg
- Weight kg:
- 0.505
