Artikelnummer:604160
Amadesa
18K Rose Gold Casting Grain
Delivery time: 3–5 weeks
Estimated arrival: Jul 21, 2026 – Aug 04, 2026
Abholverfügbarkeit konnte nicht geladen werden
Dieses 18-karätige Roségold-Gusskorn erzeugt ein formbares Endmetall mit einer satten roten Farbe, die auf strukturierten Oberflächen wie Satin, Florentin oder Bright Cut besonders gut zur Geltung kommt. Der hohe Kupferanteil im Korn verleiht die Roséfärbung, führt aber auch dazu, dass es leicht zu Feueroxidation (Firescale) kommt. Gut flussmittelbehandeln, eine reduzierende Flamme oder eine inerte Atmosphäre verwenden und zum Entfernen der Feueroxidation ein Beizbad anwenden. Verkauf erfolgt pro Pennyweight (dwt.), Mindestabnahme 0,2 dwt. Anwendungen: Jede Gussmethode. Gießen und Reinigen: Im Allgemeinen sollte Ihre Gusstemperatur 100˚F (37,7˚C) über dem Liquiduspunkt liegen (etwas höher bei filigranen Gussteilen). Verwenden Sie beim Schmelzen mit offener Flamme eine kleine Menge hochwertigen Flussmittels. Wir empfehlen Matt’s Casting Flux™. Für die weitere Reinigung werden mechanische Verfahren empfohlen. Wiederverwendung: Wenn Sie Goldgussteile wiederverwenden möchten, entfernen Sie Kupferoxide von der Oberfläche durch Beizen oder mechanisch. Wir empfehlen ein Mindestverhältnis von 1:1 zwischen neuem Korn und gebrauchtem Gold. Das wiederverwendete Gold sollte sauber und frei von Verunreinigungen sein. Zusammensetzung: Alle Bestandteile werden während des Schmelz- und Gießprozesses in einer sauerstoffreduzierten Atmosphäre gehalten, um eine optimale Entoxidation zu gewährleisten.
This 18-karat rose gold casting grain produces a malleable finished metal with a full red color that shows its best on textured finishes such as satin, florentine or bright cut.The grain’s high copper content gives its rose color but also means that it firescales easily. Flux well, use a reducing flame or inert atmosphere, and pickle to remove the firescale.Sold by the pennyweight (dwt.), minimum purchase is 0.2 dwt.ApplicationsAny casting method.Casting and CleaningIn general, your casting temperature should be 100˚F (37.7˚C) above the liquidus point (somewhat hotter if the castings are intricate). Use a small amount of high-quality flux when melting with an open flame. We recommend Matt’s Casting Flux™. For further cleaning, mechanical means are recommended.Re-UsingIf you plan to re-use gold castings, remove the copper oxides from the surface in a pickling solution or by mechanical means. We recommend a minimum 1:1 ratio of new grain to used gold. All re-used gold should be clean and free of debris.CompositionAll ingredients are kept in an oxygen-reduced atmosphere during the melting and pouring process to ensure optimum deoxidation.
Specifications
- Country of origin:
- United States
- Form:
- Casting grain
- Karat:
- 18K
- Liquidus temperature:
- 1,650°F (899°C)
- Metal color:
- Rose
- Metal type:
- Gold
- Solidus temperature:
- 1,600°F (871°C)
- Specific gravity:
- 14.98
- Weight:
- 0.000 kg
