Artikelnummer:602700
Amadesa
10K Yellow Gold Casting Grain
Delivery time: 3–5 weeks
Estimated arrival: Apr 10, 2026 – Apr 24, 2026
Abholverfügbarkeit konnte nicht geladen werden
Erzielen Sie professionelle, reproduzierbare Ergebnisse und eine helle Goldfarbe mit diesem 10-karätigen Goldgussgranulat. Spezielle Zusätze reduzieren Feuerverfärbungen und fördern guten Fluss und Füllung, was zu einer glatten Gussoberfläche führt. Formuliert mit Entoxidationsmitteln, sodass Sie 50 % Gussabschnitt mit neuem Gussgranulat mischen und dennoch gute Ergebnisse erzielen können. Verkauf nach Pennyweight (dwt.), Mindestbestellmenge 0,2 dwt. Anwendungen Jede Gießmethode. Gießen und Reinigen Im Allgemeinen sollte Ihre Gießtemperatur 100˚F (37,7˚C) über dem Liquiduspunkt liegen (etwas höher, wenn die Güsse filigran sind). Verwenden Sie beim Schmelzen mit offener Flamme eine kleine Menge hochwertigen Flussmittels. Wir empfehlen Matt’s Casting Flux™. Für eine weitere Reinigung werden mechanische Methoden empfohlen. Wiederverwendung Wenn Sie Goldgüsse wiederverwenden möchten, entfernen Sie die Kupferoxide von der Oberfläche in einer Beizlösung oder mechanisch. Wir empfehlen ein Mindestverhältnis von 1:1 zwischen neuem Korn und gebrauchtem Gold. Das wiederverwendete Gold sollte sauber und frei von Verunreinigungen sein. Zusammensetzung Alle Bestandteile werden während des Schmelz- und Gießprozesses in einer sauerstoffreduzierten Atmosphäre gehalten, um eine optimale Entoxidation zu gewährleisten.
Get professional, repeatable results and a light gold color with this 10-karat gold casting grain.
Special additives reduce firescale and promote good flow and fill, resulting in a smooth cast surface. Formulated with deoxidants so you can mix 50% casting scrap with new casting grain and still get good results.
Sold by the pennyweight (dwt.), minimum purchase is 0.2 dwt.
Applications Any casting method.
Casting and Cleaning In general, your casting temperature should be 100˚F (37.7˚C) above the liquidus point (somewhat hotter if the castings are intricate). Use a small amount of high-quality flux when melting with an open flame. We recommend Matt’s Casting Flux™. For further cleaning, mechanical means are recommended.
Re-Using If you plan to re-use gold castings, remove the copper oxides from the surface in a pickling solution or by mechanical means. We recommend a minimum 1:1 ratio of new grain to used gold. All re-used gold should be clean and free of debris.
Composition All ingredients are kept in an oxygen-reduced atmosphere during the melting and pouring process to ensure optimum deoxidation.
Specifications
- Country of origin:
- United States
- Form:
- Casting grain
- Karat:
- 10K
- Liquidus temperature:
- 1,635°F (891°C)
- Metal color:
- Yellow
- Metal type:
- Gold
- Solidus temperature:
- 1,475°F (802°C)
- Specific gravity:
- 11.5
- Weight:
- 0.000 kg
