رمز التخزين:703094
KilnMinder
KilnMinder Oven Controller K4E
🕒 Pre-order now!
Estimated shipping date: Mar 08, 2026
تعذر تحميل توفر الاستلام
تحكم بدقة في فرنك باستخدام برامج تسخين الفرن القابلة للتخصيص. متوافق مع أفران الغاز، يأتي جهاز KilnMinder™ معايرًا ومبرمجًا مسبقًا بعشرة برامج تسخين شائعة الاستخدام (يمكن تخصيصها جميعًا)، بالإضافة إلى خيار لبرمجته حسب الحاجة. تُخزن هذه البرامج في ذاكرة غير متطايرة بحيث لا تفقد المعلومات عند انقطاع التيار الكهربائي. يمكن برمجة من مرحلة واحدة إلى سبع مراحل تشمل وقت الارتفاع، ووقت الثبات، ودرجة حرارة الثبات، وحتى درجة حرارة القطع الآمن. مخزنة في ذاكرة غير متطايرة، يمكن لبرامج التسخين الاستئناف حتى بعد انقطاع التيار لمدة أربع ساعات!
- يعدل وقت الثبات بفواصل 10 دقائق، من 10 دقائق إلى 42 ساعة
- يعدل درجة حرارة الارتفاع بفواصل 10 درجات، من 100°F إلى 2,450°F
- يتعامل مع درجات حرارة الغرفة القصوى (0 إلى 150°F) وتقلبات التيار الكهربائي
- يتحمل أحمال تصل إلى مرحلة واحدة، بحد أقصى 20 أمبير
- ترمومتر من النوع N أو النوع K (يتم مراقبة الترمومتر للكشف عن الدوائر المفتوحة أو القصيرة)؛ مزود بمنفذ ترمومتر احتياطي (للاستخدام الاختياري)
- خيار الاتصالات التسلسلية؛ يدعم RS485 وRS232 في نفس الوقت
Precisely control your oven with customizeable kiln heating programs. Compatible with gas ovens, the KilnMinder™ comes fully calibrated and programmed with 10 commonly used kiln heating programs (all can be customized), plus an option for you to program as needed. These are stored in non-volatile memory so information won’t be lost due to power failure. Program from one to seven stages including ramp time, dwell time, dwell temperature—even a safety cut-out temperature. Stored in non-volatile memory, heating programs can resume even after a four-hour power outage! • Adjusts dwell time in 10-minute increments, from 10 minutes to 42 hours • Adjusts ramp temperature in 10° increments, from 100°F to 2,450°F • Handles room-temperature extremes (0 to 150°F) and power spikes • Handles loads up to a single-phase, 20-amp maximum • Type-N or type-K thermocouple (thermocouple is monitored for open or short circuits); a back-up thermocouple port is provided (optional use) • Serial communications option; simultaneously supports RS485 and RS232
Specifications
- Amperage:
- 20 amps
- Brand:
- KilnMinder
- Country of origin:
- United States
- Dimensions:
- 17 x 21 x 12cm
- Dimensions mm:
- 17 x 21 x 12cm
- Frequency:
- 50/60Hz
- Price per unit:
- Priced per Each
- Shipping weight:
- 5.453 lbs (2.473kg)
- Voltage:
- 110 volts
- Weight:
- 2.473 kg
- Weight kg:
- 2.473
