{"title":"Visi sidabro liejimo grūdai","description":"\u003cp\u003ePirkite Argentium®, sidabro sterlingą ir gryno sidabro liejimo ir lydinių grūdus .925, .940 ir .999 grynumo. Sukurti švariems lydiniams, tvirtam liejimui ir nuosekliam srautui, šie grūdai siūlo patikimą našumą luitams, komponentams ir aukštos kokybės individualios juvelyrikos gamybai.\u003c\/p\u003e","products":[{"product_id":"sterling-silver-anti-firescale-casting-grain","title":"Sterling Silver Anti-Firescale Casting Grain","description":"\u003cp\u003eGet clean castings and save finishing time with this sterling silver anti-firescale grain. It’s a great choice for all types of casting, especially creating items that will be annealed or soldered. \n\nThe sterling silver formulation is approximately 90% as hard as traditional sterling silver, and it can be used with acid-based plating solutions.  \n\nSold by the troy ounce (ozt.). \n\nApplications \nAny casting method.  \n\nCasting and Cleaning \nIn general, your casting temperature should be 100˚F (37.7˚C) above the liquidus point (somewhat hotter if the castings are intricate). Use a small amount of high-quality flux when melting with an open flame. We recommend Matt’s Casting Flux™. For further cleaning, mechanical means are recommended.   \n\nRe-Using \nIf you plan to re-use sterling silver castings, remove the copper oxides from the surface in a pickling solution or by mechanical means. We recommend a minimum 1:1 ratio of new grain to used silver. All re-used silver should be clean and free of debris. \n\nComposition \nThe copper used in alloying our sterling silver is 99.9% pure and oxygen-free. Each batch of casting grain is assayed to ensure product that contains 92.5% silver. \n\nAll ingredients are kept in an oxygen-reduced atmosphere during the melting and pouring process to ensure optimum deoxidation.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50666543546714,"sku":"100804","price":92.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/100804in_448100.jpg?v=1763071295"},{"product_id":"sterilite™-de-ox-sterling-silver-casting-grain","title":"Sterilite™ De-Ox sidabro lydinio liejimo granulės","description":"\u003cp\u003eSutaupykite poliravimo laiką ir gaukite puikią atsparumą patamsėjimui su Sterilite™ De-Ox sidabrinės sterli liejimo grūdeliais.  \n\nTanki grūdelių struktūra suteikia lygią liejimo paviršių, sumažindama poliravimo laiką. Gautas ryškiai baltas metalas šešis kartus geriau atsparus patamsėjimui nei įprastas sidabrinė sterli. Jūsų liejiniai ilgai išliks ryškūs be rodžio padengimo poreikio. \n\nLiejiniai turi Vickers kietumą 80 (šilumos apdorojimas padidina šį kietumą iki 97). \n\nPanaudojimas \nBet koks liejimo metodas. \n\nLiejimas ir valymas \nPaprastai liejimo temperatūra turėtų būti 100˚F (37,7˚C) aukščiau liquiduso taško (šiek tiek aukštesnė, jei liejiniai yra sudėtingi). Lydant atvira liepsna naudokite nedidelį kiekį aukštos kokybės flukso. Rekomenduojame Matt’s Casting Flux™. Tolimesniam valymui rekomenduojami mechaniniai metodai.  \n\nPakartotinis naudojimas \nJei planuojate pakartotinai naudoti sidabrinės sterli liejinius, pašalinkite vario oksidus nuo paviršiaus raugimo tirpale arba mechaniniais būdais. Rekomenduojame naujų grūdelių ir naudoto sidabro santykį ne mažesnį kaip 1:1. Visi pakartotinai naudojami sidabrai turi būti švarūs ir be nešvarumų. \n\nSudėtis \nMūsų sidabrinės sterli lydinio varis yra 99,9 % grynumo ir be deguonies. Kiekviena liejimo grūdelių partija yra analizuojama, kad būtų užtikrintas produktas, turintis 92,5 % sidabro. \n\nVisi ingredientai laikomi deguonies sumažintoje aplinkoje lydymo ir liejimo proceso metu, siekiant užtikrinti optimalų deoksidavimą.\u003c\/p\u003e","brand":"Sterilite","offers":[{"title":"Default Title","offer_id":50666543907162,"sku":"100806","price":91.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/100806_702741.jpg?v=1763071316"},{"product_id":"legor®-casting-master-alloy-for-925-silver-ag108m","title":"Legor® liejimo pagrindinė lydinio medžiaga 925 sidabrui, AG108M","description":"\u003cp\u003eSukurtas Legor® Group, šis sidabro pagrindo lydinys skirtas sidabro prabos prarasto vaško liejimo taikymams, naudojant įvairias liejimo sistemas. Jo antioksidacinės savybės daro šį lydinį idealų akmenų liejimui vietoje. Šis lydinys specialiai sukurtas gaminti ryškius, be oksidacijos liejinius su išskirtine paviršiaus kokybe ir puikiomis mechaninėmis savybėmis, kas pagerina atliekų perdirbimo galimybes. Pagrindinio lydinio liejimo grūdelis yra iš anksto suformuluotas pagrindinių metalų elementų mišinys; pridėkite tinkamą kiekį brangiojo metalo grūdelių prie pagrindinio lydinio, kad sukurtumėte reikiamą liejimo lydinį.\n\nParduodama troy uncijomis (ozt.).\u003c\/p\u003e","brand":"Legor Group","offers":[{"title":"Default Title","offer_id":50667283710298,"sku":"104422","price":10.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/104422in_173913.jpg?v=1763071386"},{"product_id":"925-sterling-silver-casting-grain","title":".925 Sterling Silver Casting Grain","description":"\u003cp\u003eGet professional, repeatable results with our best-selling, .925 sterling silver shot casting grain.\n\nWe start with the best raw materials, so that you get a smooth cast. Our manufacturing team has honed special processes to keep our silver casting grain oxygen- and gas-free. You enjoy consistent quality and composition over time, with a bright-white, lustrous finished metal.\n\nApplications \nAny casting method.\n\nCasting and Cleaning\nIn general, your casting temperature should be 100˚F (37.7˚C) above the liquidus point (somewhat hotter if the castings are intricate). Use a small amount of high-quality flux when melting with an open flame. We recommend Matt’s Casting Flux™. For further cleaning, mechanical means are recommended.  \n\nRe-Using \nIf you plan to re-use sterling silver castings, remove the copper oxides from the surface in a pickling solution or by mechanical means. We recommend a minimum 1:1 ratio of new grain to used silver. All re-used silver should be clean and free of debris. \n\nComposition \nThe copper used in alloying our sterling silver is 99.9% pure and oxygen-free. Each batch of casting grain is assayed to ensure product that contains 92.5% silver. \n\nAll ingredients are kept in an oxygen-reduced atmosphere during the melting and pouring process to ensure optimum deoxidation.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50685920674138,"sku":"100800","price":82.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/100800in_541425.jpg?v=1763043448"},{"product_id":"999-fine-silver-casting-grain","title":"999 gryno sidabro liejimo granulės","description":"\u003cp\u003ePasiekite profesionalius, pakartojamus rezultatus su šiuo universalus 99,9 % gryno fini sidabro apvaliu liejimo grūdu. \n\nMūsų liejimo komanda tobulino specialius procesus, kad mūsų sidabro liejimo grūdas būtų be deguonies. Jūs gaunate nuoseklią kokybę ir sudėtį laikui bėgant, su ryškiai balta, blizgia galutine metalo išvaizda. \n\nParduodama trojūzėmis uncijomis (ozt.). \n\nPanaudojimas\nBet koks liejimo būdas ir ingotų gamyba. \n\nLiejimas ir valymas \nPaprastai liejimo temperatūra turėtų būti 100˚F (37,7˚C) aukščiau liquiduso taško (šiek tiek aukštesnė, jei liejiniai yra sudėtingi). Lydant atvira liepsna naudokite nedidelį kiekį aukštos kokybės flukso. Rekomenduojame Matt’s Casting Flux™. Tolimesniam valymui rekomenduojami mechaniniai metodai.  \n\nPakartotinis naudojimas \nJei planuojate pakartotinai naudoti fini sidabro liejinius, pašalinkite oksidus nuo paviršiaus rūgštinimo tirpale, o tada apdirbkite su poliravimo mišiniu, kad pašalintumėte likusias nuosėdas. Rekomenduojame naudoti ne mažesnį kaip 1:1 naujo grūdo ir naudoto sidabro santykį. \n\nSudėtis\nMūsų fini sidabras elektrolitiškai pagaminamas mūsų modernioje gamykloje. Sidabro grynumas nominaliai yra 99,99 % ir daugiau.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50685921952090,"sku":"100802","price":114.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/100802in_631478.jpg?v=1763071274"},{"product_id":"argentium®-940-pro-silver-casting-grain","title":"Argentium® 940 PRO Silver Casting Grain","description":"\u003cp\u003eGet durable, tarnish-resistant castings with anti-oxidant, anti-firescale Argentium® 940 PRO. Exceptional fluidity makes this grain ideal for filigree and detailed designs, small items, flat surfaces and large surface areas. This grain also delivers beautiful results with stone-in-place casting. Argentium® 940 PRO has the hardness and strength of an alloy with a higher silver content than sterling. This produces in a white, reflective color and durability that resists scratching. Priced by the troy ounce (ozt.)ApplicationsArgentium® 940 PRO casting grain is specifically engineered for investment casting with modern enclosed machines, but also performs well in open systems. It is the alloy of choice for those whose work is predominately investment casting. CompositionArgentium® 940 PRO is made with copper and select deoxidizing elements. The alloy is guaranteed to be at least 93.5% pure silver. Casting and CleaningIt is important to use a flask temperature at least 85°F (30°C) below that normally used for sterling and never higher than 1,250°F. Use in dedicated crucibles to prevent accidental cross-contamination. Air-cool at least 15 minutes before quenching to achieve a hardness approximately equal to that of standard sterling. Using boric acid as a flux is recommended. Re-UsingWhen re-casting Argentium® Silver, we recommend 1:1 ratio of new grain to used silver. For higher-quality pieces, a higher percentage of fresh grain ensures the best results. Remove the copper oxides from the surface in a pickling solution and then tumble with burnishing compound to remove any remaining debris. Adding traditional sterling to this grain is not recommend as doing so tends to dilute the properties of Argentium Silver.\u003c\/p\u003e","brand":"Rio Grande","offers":[{"title":"Default Title","offer_id":52645111169370,"sku":"103000","price":125.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/103000.jpg?v=1762290463"},{"product_id":"legor®-casting-master-alloy-for-925-silver-ag115m","title":"Legor® Casting Master Alloy for 925 Silver, AG115M","description":"\u003cp\u003eFormulated by Legor® Group, this highly tarnish-resistant silver master alloy from Legor® Group is intended for silver lost-wax casting applications in a variety of systems, and is ideal for stone-in-place casting. It is specifically formulated to deliver bright color, oxidation-free castings with exceptional surface quality and excellent mechanical properties, which enhances the reusability of scrap. A master alloy casting grain is a pre-formulated mix of base-metal elements; add the appropriate amount of precious metal grain to the master alloy to create the casting alloy you need.\n\nSold by the troy ounce (ozt.).\u003c\/p\u003e","brand":"Legor Group","offers":[{"title":"Default Title","offer_id":52646402982234,"sku":"104423","price":7.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/104423in_718576.jpg?v=1762297307"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/collections\/silver-metals-casting-grain_a2e8b290-cb70-4bde-9797-e69fb398cfe0.png?v=1763455626","url":"https:\/\/www.amadesa.com\/lt-lt\/collections\/all-silver-casting-grain.oembed","provider":"Amadesa","version":"1.0","type":"link"}