{"title":"Laadunmerkintäleimat","description":null,"products":[{"product_id":"marking-stamp-set-bent-shank-1mm-characters","title":"Merkintäleimasinsetti, taivutettu varsi, merkit","description":"\u003cp\u003eJokainen tämän leimasinsetin leima on selkeästi merkitty, mikä helpottaa haluamasi leiman löytämistä. Taivutetun leiman kärjen lähellä oleva taivutettu lovi tekee niistä ihanteellisia kaarevien pintojen, kuten sormuksen tai rannekorun sisäpuolen, leimaamiseen. Tämä setti sisältää seitsemän erilaista leimaa, joissa lukee \"10K\", \"14K\", \"18K\", \"750\", \"Plat\", \"925\" ja \"STER\", ja se toimitetaan puusta valmistetussa järjestäjälaatikossa, jossa on magneettisuljin.\n\nParhaiden tulosten saavuttamiseksi — ja koska leimamerkkiä ei ole helppo poistaa sen tekemisen jälkeen — on tärkeää harjoitella ennen kuin alat leimata korusuunnitelmiasi. Jätteeksi jäävät levyn palat tai perusmetallista valmistetut sormuspohjat ovat ihanteellisia, jotta saat tuntuman sekä leimaan että tehokkaan vasaraiskun voimaan. Käytä messinkivasaraa leiman lyömiseen, jotta leima ei vahingoitu, ja tue työkappalettasi penkkipalalla tai alasimella. Lopuksi tee leimaus ennen kivien istuttamista, jotta et vahingoita istutuksia tai löysennä asetettuja kiviä.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50671992373594,"sku":"111700","price":112.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/111700in1.jpg?v=1762874184"},{"product_id":"marking-stamp-935-straight-shank-1mm-character","title":"Leimausleimasin, \"935,\" Suora varsi, Merkki","description":"\u003cp\u003eTämä suora leima lukee \"935\"; ihanteellinen Argentium® 935 Silver -laatuisten mallien merkitsemiseen. Leima on tarkasti kaiverrettu 5\/16\" työkaluteräksestä, joka on öljykarkaistu 58\/62 HRC kovuuteen, tarjoten terävät, yksityiskohtaiset pinnat ja pitkän käyttöiän. Suoran varren leimoissa on litteä kärkipinta, joka on kohtisuorassa työkalun vartta vastaan. Nämä leimat sopivat täydellisesti litteiden pintojen, kuten laatu- tai merkkilappujen, levyjen, leimausten ja muiden komponenttien merkitsemiseen.\n\nParhaiden tulosten saavuttamiseksi — ja koska leimamerkkiä ei ole helppo poistaa sen tekemisen jälkeen — on tärkeää harjoitella ennen kuin alat leimata korusuunnitelmiasi. Jätteeksi jäävät levyn palat tai perusmetallista valmistetut sormuspohjat ovat ihanteellisia, jotta saat tuntuman sekä leimaan että tehokkaan vasaraiskun voimaan. Käytä messinkivasaraa leiman lyömiseen, jotta leima ei vahingoitu, ja tue työkalua penkkipalalla tai alasinpohjalla. Lopuksi tee leimaus ennen kivien istuttamista, jotta et vahingoita istutuksia tai löysennä asetettuja kiviä.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672893067610,"sku":"112098","price":27.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112098in1.jpg?v=1762874315"},{"product_id":"marking-stamp-sterling-script-straight-shank-1mm","title":"Leimausleimasin, \"Sterling\" (Käsiala), Suora varsi","description":"\u003cp\u003eTämä leima lukee \"Sterling\" käsinkirjoitusfontilla; ihanteellinen merkitsemään suunnitelmasi laadukkaasti. Leima on tarkasti kaiverrettu 5\/16\" työkaluteräksestä, joka on öljykarkaistu 58\/62 HRC kovuuteen, tarjoten terävät, yksityiskohtaiset pinnat ja pitkän käyttöiän. Suoralla varrella varustetuissa leimoissa on litteä kärkipinta, joka on kohtisuorassa työkalun vartta vasten. Nämä leimat sopivat täydellisesti litteiden pintojen, kuten laatu- tai merkkitunnisteiden, levyjen, leimausten ja muiden komponenttien merkitsemiseen.\n\nParhaiden tulosten saavuttamiseksi — ja koska leimamerkkiä ei ole helppo poistaa sen tekemisen jälkeen — on tärkeää harjoitella ennen kuin alat leimata korusuunnitelmiasi. Jätteeksi jäävät levyn palat tai perusmetallirenkaiden pohjat ovat ihanteellisia auttamaan sinua saamaan tuntumaa sekä leimaan että tehokkaan vasaraiskun voimaan. Käytä messinkivasaraa leiman lyömiseen, jotta leima ei vahingoitu, ja tue työkappalettasi penkkipalalla tai alasimella. Lopuksi tee leimaus ennen kivien istutusta, jotta istutukset eivät vahingoitu eikä istutetut kivet löysty.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672911548762,"sku":"11212905","price":25.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11212905in.jpg?v=1762416520"},{"product_id":"marking-stamp-925-bent-shank-1mm","title":"Leimausleimasin, \"925,\" Taivutettu varsi","description":"\u003cp\u003eTämä taivutettu leimamerkki lukee \"925\"; ihanteellinen suunnitelmiesi laatumerkintään. Leima on tarkasti kaiverrettu 5\/16\" työkaluteräksestä, joka on öljykarkaistu 58\/62 HRC kovuuteen, tarjoten terävät, yksityiskohtaiset pinnat ja pitkän käyttöiän. Taivutetulla varrella varustetuissa leimoissa on lovi kärjen lähellä, mikä tekee niistä ihanteellisia kaarevien pintojen, kuten sormuksen tai rannekorun sisäpuolen, leimaamiseen; hieman kupera iskualue takaa terävän, puhtaan jäljen.\n\nParhaiden tulosten saavuttamiseksi — ja koska leimamerkkiä ei ole helppo poistaa sen tekemisen jälkeen — on tärkeää harjoitella ennen kuin alat leimata korusuunnitelmiasi. Jätteeksi jäävät levyn palat tai perusmetallirenkaan pohjat ovat ihanteellisia auttamaan sinua saamaan tuntumaa sekä leimaan että tehokkaan vasaraiskun voimaan. Käytä messinkivasaraa leiman lyömiseen, jotta leima ei vahingoitu, ja tue työkappalettasi penkkipalalla tai alasimella. Lopuksi tee leimaus ennen kivien istutusta, jotta istutukset eivät vahingoitu eikä istutetut kivet löysty.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672914825562,"sku":"11213001","price":29.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213001in.jpg?v=1762415297"},{"product_id":"marking-stamp-925-straight-shank-1mm","title":"Leimausleimasin, \"925,\" suora varsi","description":"\u003cp\u003eTämä suora leima lukee \"925\"; ihanteellinen laatumerkintään suunnitelmissasi. Leima on tarkasti kaiverrettu 5\/16\" työkaluteräksestä, joka on öljykarkaistu 58\/62 HRC:hen, tarjoten terävät, yksityiskohtaiset pinnat ja pitkän käyttöiän. Suoran varren leimoissa on litteä kärkipinta, joka on kohtisuorassa työkalun vartta vastaan. Nämä leimat sopivat täydellisesti litteiden pintojen, kuten laatu- tai merkkilappujen, levyjen, leimausten ja muiden komponenttien merkintään.\n\nParhaiden tulosten saavuttamiseksi—ja koska leimamerkkiä ei ole helppo poistaa sen tekemisen jälkeen—on tärkeää harjoitella ennen kuin yrität merkitä korusuunnitelmasi. Jätteeksi jäävät levyn palat tai perusmetallista valmistetut sormuspohjat ovat ihanteellisia auttamaan sinua saamaan tuntumaa sekä leimaan että tehokkaan vasaraiskun voimaan. Käytä messinkivasaraa leiman lyömiseen, jotta leima ei vahingoitu, ja tue työkappalettasi penkkipalalla tai alasimella. Lopuksi tee leimaus ennen kivien istutusta, jotta istutukset eivät vahingoitu eikä istutetut kivet löysty.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672915022170,"sku":"11213002","price":28.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213002in.jpg?v=1762857626"},{"product_id":"marking-stamp-999fs-straight-shank-1mm","title":"Leimausleimasin, \"999FS,\" suora varsi","description":"\u003cp\u003eTämä suora leima lukee \"999FS\"; ihanteellinen merkitsemään suunnitelmasi laadukkaasti. Leima on tarkasti kaiverrettu 5\/16\" työkaluteräksestä, joka on öljykarkaistu 58\/62 HRC kovuuteen, tarjoten terävät, yksityiskohtaiset pinnat ja pitkän käyttöiän. Suoralla varrella varustetuissa leimoissa on litteä kärkipinta, joka on kohtisuorassa työkalun vartta vasten. Nämä leimat sopivat täydellisesti litteiden pintojen, kuten laatu- tai merkkilappujen, levyjen, leimausten ja muiden komponenttien merkitsemiseen.\n\nParhaiden tulosten saavuttamiseksi — ja koska leimamerkkiä ei ole helppo poistaa sen tekemisen jälkeen — on tärkeää harjoitella ennen kuin alat leimata korusuunnitelmiasi. Jätteeksi jäävät levyn palat tai perusmetallista valmistetut sormuspohjat ovat ihanteellisia, jotta saat tuntuman sekä leimaan että tehokkaan vasaraiskun voimaan. Käytä messinkivasaraa leiman lyömiseen, jotta leima ei vahingoitu, ja tue työkalua penkkipalalla tai alasimella. Lopuksi tee leimaus ennen kivien istuttamista, jotta istutukset eivät vahingoitu eivätkä kivet löysty.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672915939674,"sku":"11213004","price":28.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213004in.jpg?v=1762416545"},{"product_id":"marking-stamp-usa-straight-shank-1mm","title":"Merkintäleimasin, \"USA,\" Suora varsi","description":"\u003cp\u003eTämä suora leima lukee \"USA\"; ihanteellinen merkitsemään suunnitelmasi laadukkaasti. Leima on tarkasti kaiverrettu 5\/16\" työkaluteräksestä, joka on öljykarkaistu 58\/62 HRC kovuuteen, tarjoten terävät, yksityiskohtaiset pinnat ja pitkän käyttöiän. Suorat varret omaavissa leimoissa on litteä kärkipinta, joka on kohtisuorassa työkalun vartta vastaan. Nämä leimat sopivat täydellisesti litteiden pintojen, kuten laatu- tai merkkitunnisteiden, levyjen, leimausten ja muiden komponenttien merkitsemiseen.\n\nParhaiden tulosten saavuttamiseksi—ja koska leimamerkkiä ei ole helppo poistaa sen tekemisen jälkeen—on tärkeää harjoitella ennen kuin yrität merkitä korusuunnitelmasi. Jätteeksi jäävät levyn palat tai perusmetallirenkaan pohjat ovat ihanteellisia auttamaan sinua saamaan tuntumaa sekä leimaan että tehokkaan vasaraiskun voimaan. Käytä messinkivasaraa leiman lyömiseen, jotta leima ei vahingoitu, ja tue työkappalettasi penkkipalalla tai alasinjalalla. Lopuksi tee leimaus ennen kivien asettamista, jotta asetukset eivät vahingoitu eikä asetetut kivet löysty.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672918593882,"sku":"11213102","price":28.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213102.jpg?v=1762874346"},{"product_id":"marking-stamp-platinum-bent-shank-1mm","title":"Leimausleimasin, \"Platina\", Taivutettu varsi","description":"\u003cp\u003eTämä taivutettu leima lukee \"Platinum\"; ihanteellinen laatumerkintään suunnitelmissasi. Leima on tarkasti kaiverrettu 5\/16\" työkaluteräksestä, joka on öljykarkaistu 58\/62 HRC kovuuteen, tarjoten terävät, yksityiskohtaiset pinnat ja pitkän käyttöiän. Taivutetulla varrella varustetuissa leimoissa on lovi kärjen lähellä, mikä tekee niistä ihanteellisia kaarevien pintojen, kuten sormuksen tai rannekorun sisäpuolen, leimaamiseen; hieman kupera iskualue takaa terävän, puhtaan jäljen.\n\nParhaiden tulosten saavuttamiseksi – ja koska leimamerkkiä ei ole helppo poistaa sen tekemisen jälkeen – on tärkeää harjoitella ennen kuin alat merkitä korusuunnitelmiasi. Jätteeksi jäävät levyn palat tai perusmetallista valmistetut sormuspohjat ovat ihanteellisia auttamaan sinua saamaan tuntumaa sekä leimaan että tehokkaan vasaraiskun voimaan. Käytä messinkivasaraa leiman lyömiseen, jotta leima ei vahingoitu, ja tue työkappalettasi penkkipalalla tai alasimella. Lopuksi tee leimaus ennen kivien istutusta, jotta istutukset eivät vahingoitu eikä istutetut kivet löysty.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672920002906,"sku":"11213401","price":29.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213401in.jpg?v=1762620032"},{"product_id":"marking-stamp-platinum-straight-shank-1mm","title":"Leimausleimasin, \"Platina,\" Suora varsi","description":"\u003cp\u003eTämä suora leima lukee \"Platinum\"; ihanteellinen merkitsemään suunnitelmasi laadukkaasti. Leima on tarkasti kaiverrettu 5\/16\" työkaluteräksestä, joka on öljykarhennettu 58\/62 HRC kovuuteen, tarjoten terävät, yksityiskohtaiset pinnat ja pitkän käyttöiän. Suoran varren leimoissa on litteä kärkipinta, joka on kohtisuorassa työkalun vartta vastaan. Nämä leimat sopivat täydellisesti litteiden pintojen, kuten laatu- tai merkkilappujen, levyjen, leimausten ja muiden komponenttien merkitsemiseen.\n\nParhaiden tulosten saavuttamiseksi—ja koska leimattu merkki on vaikea poistaa sen tekemisen jälkeen—on tärkeää harjoitella ennen kuin yrität merkitä korusuunnitelmiasi. Jätteet levystä tai pohjametallirenkaiden tyhjistä kappaleista ovat ihanteellisia auttamaan sinua saamaan tuntumaa sekä leimaan että tehokkaan vasaraiskun voimaan. Käytä messinkivasaraa leiman lyömiseen, jotta leima ei vahingoitu, ja tue työkappalettasi penkkipalalla tai alasimella. Lopuksi tee leimaus ennen kivien asettamista, jotta asetukset eivät vahingoitu eikä asetetut kivet löysty.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672921182554,"sku":"11213402","price":28.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213402.jpg?v=1762424499"},{"product_id":"tool-steel-copyright-stamp-straight-shank-3-2mm-character","title":"Tool Steel Copyright Stamp, Straight Shank, Character","description":"\u003cp\u003eSafeguard your designs with this copyright straight stamp. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50674379456858,"sku":"112144","price":29.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112144.jpg?v=1741387033"},{"product_id":"tool-steel-copyright-stamp-straight-shank-1-6mm-character","title":"Tool Steel Copyright Stamp, Straight Shank, Character","description":"\u003cp\u003eSafeguard your designs with this copyright straight stamp. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50674380112218,"sku":"112145","price":29.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112145_60ebbb82-1b52-4e9f-b6ad-499e99cb44b7.jpg?v=1741387043"},{"product_id":"tool-steel-copyright-stamp-bent-shank-1-6mm-character","title":"Tool Steel Copyright Stamp, Bent Shank, Character","description":"\u003cp\u003eSafeguard your designs with this copyright bent stamp. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a bent shank have a notch near the tip that makes them ideal for stamping curved surfaces such as the inside of a ring or bangle; the slightly domed striking surface ensure a crisp, clean mark.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50674380439898,"sku":"112146","price":29.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112146in.jpg?v=1762890252"},{"product_id":"marking-stamp-950-pd-straight-shank-1mm-character","title":"Leimausleimasin \"950 Pd\", suora varsi, merkki","description":"\u003cp\u003eTämä suora leimamerkintä lukee \"950 Pd\"; ihanteellinen .950-puhtaan palladiumin laatuvaatimusten merkitsemiseen. Leima on tarkasti kaiverrettu 5\/16\" työkaluteräksestä, joka on öljykarkaistu 58\/62 HRC kovuuteen, tarjoten terävät, yksityiskohtaiset pinnat ja pitkän käyttöiän. Suoralla varrella varustetuissa leimoissa on litteä kärkipinta, joka on kohtisuorassa työkalun vartta vastaan. Nämä leimat sopivat täydellisesti litteiden pintojen, kuten laatu- tai bränditunnisteiden, levyjen, leimausten ja muiden komponenttien merkitsemiseen.\n\nParhaiden tulosten saavuttamiseksi—ja koska leimamerkkiä ei ole helppo poistaa sen tekemisen jälkeen—on tärkeää harjoitella ennen kuin alat leimata korusuunnitelmiasi. Jätteeksi jäävät levyn palat tai perusmetallista valmistetut sormuspohjat ovat ihanteellisia auttamaan sinua saamaan tuntumaa sekä leimaan että tehokkaan vasaraiskun voimaan. Käytä messinkivasaraa leiman lyömiseen, jotta leima ei vahingoitu, ja tue työkappalettasi penkkipalalla tai alasimella. Lopuksi tee leimaus ennen kivien istuttamista, jotta istutukset eivät vahingoitu eikä istutetut kivet löysty.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50674382012762,"sku":"112148","price":27.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112148.jpg?v=1741387072"},{"product_id":"marking-stamp-950plat-straight-shank-1mm-character","title":"Merkintäleimasin, \"950Plat,\" Suora varsi, Merkki","description":"\u003cp\u003eTämä leimamerkki lukee \"950Plat\"; ihanteellinen .950-puhtaan platinan laatuvaatimusten merkitsemiseen. Leima on tarkasti kaiverrettu 5\/16\" työkaluteräksestä, joka on öljykarkaistu 58\/62 HRC kovuuteen, tarjoten terävät, yksityiskohtaiset pinnat ja pitkän käyttöiän. Suoralla varrella varustetuissa leimoissa on litteä kärkipinta, joka on kohtisuorassa työkalun vartta vastaan. Nämä leimat sopivat täydellisesti litteiden pintojen, kuten laatu- tai bränditunnisteiden, levyjen, leimausten ja muiden komponenttien merkitsemiseen.\n\nParhaiden tulosten saavuttamiseksi — ja koska leimamerkkiä ei ole helppo poistaa sen tekemisen jälkeen — on tärkeää harjoitella ennen kuin alat leimata korusuunnitelmiasi. Jätteeksi jäävät levyn palat tai perusmetallista valmistetut sormuspohjat ovat ihanteellisia, jotta saat tuntuman sekä leimaan että tehokkaan vasaraiskun voimaan. Käytä messinkivasaraa leiman lyömiseen, jotta leima ei vahingoitu, ja tue työkappalettasi penkkipalalla tai alasimella. Lopuksi tee leimaus ennen kivien istuttamista, jotta et vahingoita istutuksia tai löysennä asetettuja kiviä.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50674487624026,"sku":"112896","price":27.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112896_67eb2575-20d8-4802-8286-65c7aaf6c6a1.jpg?v=1741459863"},{"product_id":"marking-stamp-950-pd-bent-shank-1mm-character","title":"Merkintäleimasin \"950 Pd\", Taivutettu varsi, Merkki","description":"\u003cp\u003eTämä suora leima lukee \"950 Pd\"; ihanteellinen laadun merkitsemiseen .950-puhtaalla palladiumilla valmistetuissa malleissa. Leima on tarkasti kaiverrettu 5\/16\" työkaluteräksestä, joka on öljykarkaistu 58\/62 HRC:iin, tarjoten terävät, yksityiskohtaiset pinnat ja pitkän käyttöiän. Leimat, joissa on taivutettu varsi, sisältävät loven kärjen lähellä, mikä tekee niistä ihanteellisia kaarevien pintojen, kuten sormuksen tai rannekorun sisäpuolen, leimaamiseen; hieman kupera iskualue varmistaa terävän, puhtaan merkin.\n\nParhaiden tulosten saavuttamiseksi—ja koska leimamerkkiä ei ole helppo poistaa sen tekemisen jälkeen—on tärkeää harjoitella ennen kuin yrität leimata korusuunnitelmasi. Jätteeksi jäävät levyn palat tai perusmetallirenkaan pohjat ovat ihanteellisia auttamaan sinua saamaan tuntumaa sekä leimaan että tehokkaan vasaraiskun voimaan. Käytä messinkivasaraa leiman lyömiseen, jotta leima ei vahingoitu, ja tue työkappalettasi penkkipalalla tai alasimella. Lopuksi tee leimaus ennen kivien istutusta, jotta istutukset eivät vahingoitu eikä istutetut kivet löysty.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50674611323226,"sku":"112149","price":29.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112149in.jpg?v=1762890270"},{"product_id":"marking-stamp-14k-straight-shank","title":"Marking Stamp, \"14K,\" Straight Shank","description":"\u003cp\u003eThis straight marking stamp reads \"14K\"; ideal for quality-marking designs made with 14-karat gold. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"0.75mm","offer_id":52660074119514,"sku":"11212301","price":23.17,"currency_code":"EUR","in_stock":true},{"title":"1mm","offer_id":52660074152282,"sku":"11212303","price":23.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11212301in1.jpg?v=1762415119"},{"product_id":"sterling-marking-stamps-straight-shank","title":"Sterling Marking Stamps, Straight Shank","description":"\u003cp\u003eThis straight marking stamp reads \"Sterling\"; ideal for quality-marking your designs made with sterling silver. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"0.75mm","offer_id":52660084113754,"sku":"11212901","price":29.68,"currency_code":"EUR","in_stock":true},{"title":"1mm","offer_id":52660084146522,"sku":"11212903","price":30.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11212901.jpg?v=1762415397"},{"product_id":"sterling-marking-stamps-bent-shank","title":"Sterling Marking Stamps, Bent Shank","description":"\u003cp\u003eThis bent marking stamp reads \"Sterling\"; ideal for quality-marking your designs made with sterling silver. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a bent shank have a notch near the tip that makes them ideal for stamping curved surfaces such as the inside of a ring or bangle; the slightly domed striking surface ensure a crisp, clean mark.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"0.75mm","offer_id":52660167410010,"sku":"11212902","price":31.04,"currency_code":"EUR","in_stock":true},{"title":"1mm","offer_id":52660167442778,"sku":"11212904","price":31.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11212902.jpg?v=1762416014"},{"product_id":"marking-stamp-999fs-bent-shank-1mm","title":"Marking Stamp, \"999FS,\" Bent Shank","description":"\u003cp\u003eThis bent marking stamp reads \"999FS\"; ideal for quality-marking your designs. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a bent shank have a notch near the tip that makes them ideal for stamping curved surfaces such as the inside of a ring or bangle; the slightly domed striking surface ensure a crisp, clean mark.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":52660192870746,"sku":"11213003","price":31.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213003in.jpg?v=1762416237"},{"product_id":"18k-marking-stamps-straight-shank","title":"18K Marking Stamps, Straight Shank","description":"\u003cp\u003eThis straight marking stamp reads \"18K\"; ideal for quality-marking designs made with 18-karat gold. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"0.75mm","offer_id":52660197982554,"sku":"11212201","price":23.17,"currency_code":"EUR","in_stock":true},{"title":"1mm","offer_id":52660198015322,"sku":"11212203","price":23.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11212201in1.jpg?v=1762416279"},{"product_id":"18k-marking-stamps-bent-shank","title":"18K Marking Stamps, Bent Shank","description":"\u003cp\u003eThis bent marking stamp reads \"18K\"; ideal for quality-marking designs made with 18-karat gold. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a bent shank have a notch near the tip that makes them ideal for stamping curved surfaces such as the inside of a ring or bangle; the slightly domed striking surface ensure a crisp, clean mark.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"0.75mm","offer_id":52660210336090,"sku":"11212202","price":23.89,"currency_code":"EUR","in_stock":true},{"title":"1mm","offer_id":52660210368858,"sku":"11212204","price":23.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11212202.jpg?v=1762416422"},{"product_id":"14k-marking-stamps-bent-shank","title":"14K Marking Stamps, Bent Shank","description":"\u003cp\u003eThis bent marking stamp reads \"14K\"; ideal for quality-marking designs made with 14-karat gold. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a bent shank have a notch near the tip that makes them ideal for stamping curved surfaces such as the inside of a ring or bangle; the slightly domed striking surface ensure a crisp, clean mark.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"0.75mm","offer_id":52660213055834,"sku":"11212302","price":23.88,"currency_code":"EUR","in_stock":true},{"title":"1mm","offer_id":52660213088602,"sku":"11212304","price":23.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11212302in.jpg?v=1762416473"},{"product_id":"22k-marking-stamps-straight-shank","title":"22K Marking Stamps, Straight Shank","description":"\u003cp\u003eThis straight marking stamp reads \"22K\"; ideal for quality-marking your designs. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"0.75mm","offer_id":52660218495322,"sku":"11213204","price":23.52,"currency_code":"EUR","in_stock":false},{"title":"1mm","offer_id":52660218528090,"sku":"11213203","price":23.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213203in.jpg?v=1762416576"},{"product_id":"marking-stamp-940-bent-shank-1mm-character","title":"Marking Stamp, \"940,\" Bent Shank, Character","description":"\u003cp\u003eThis bent marking stamp reads \"940\"; ideal for quality-marking designs made with Argentium® 940 Silver. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a bent shank have a notch near the tip that makes them ideal for stamping curved surfaces such as the inside of a ring or bangle; the slightly domed striking surface ensure a crisp, clean mark. For best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":52660257325402,"sku":"11212206","price":30.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11212206in.jpg?v=1762417053"},{"product_id":"24k-marking-stamps-straight-shank","title":"24K Marking Stamps, Straight Shank","description":"\u003cp\u003eThis straight marking stamp reads \"24K\"; ideal for quality-marking your designs. The stamp is precision-engraved from 5\/16' tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"0.75mm","offer_id":52660331708762,"sku":"11213304","price":23.17,"currency_code":"EUR","in_stock":true},{"title":"1mm","offer_id":52660331741530,"sku":"11213303","price":23.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213304.jpg?v=1762418170"},{"product_id":"marking-stamp-940-straight-shank-1mm-character","title":"Marking Stamp, \"940,\" Straight Shank, Character","description":"\u003cp\u003eThis straight marking stamp reads \"940\"; ideal for quality-marking designs made with Argentium® 940 Silver. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. For best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":52660342128986,"sku":"11212205","price":30.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11212205in.jpg?v=1762418292"},{"product_id":"10k-marking-stamps-straight-shank","title":"10K Marking Stamps, Straight Shank","description":"\u003cp\u003eThis straight marking stamp reads \"10K\"; ideal for quality-marking designs made with 10-karat gold. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"0.75mm","offer_id":52660347666778,"sku":"11212401","price":23.17,"currency_code":"EUR","in_stock":true},{"title":"1mm","offer_id":52660347699546,"sku":"11212403","price":23.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11212401in1.jpg?v=1762418352"},{"product_id":"10k-marking-stamps-bent-shank","title":"10K Marking Stamps, Bent Shank","description":"\u003cp\u003eThis bent marking stamp reads \"10K\"; ideal for quality-marking designs made with 10-karat gold. The stamp is precision-engraved from 5\/16' tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a bent shank have a notch near the tip that makes them ideal for stamping curved surfaces such as the inside of a ring or bangle; the slightly domed striking surface ensure a crisp, clean mark.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"0.75mm","offer_id":52660353007962,"sku":"11212402","price":23.89,"currency_code":"EUR","in_stock":true},{"title":"1mm","offer_id":52660353040730,"sku":"11212404","price":23.89,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11212402.jpg?v=1762418424"},{"product_id":"22k-marking-stamps-bent-shank","title":"22K Marking Stamps, Bent Shank","description":"\u003cp\u003eThis bent marking stamp reads \"22K\"; ideal for quality-marking your designs. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a bent shank have a notch near the tip that makes them ideal for stamping curved surfaces such as the inside of a ring or bangle; the slightly domed striking surface ensure a crisp, clean mark.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"0.75mm","offer_id":52660356448602,"sku":"11213202","price":24.3,"currency_code":"EUR","in_stock":true},{"title":"1mm","offer_id":52660356481370,"sku":"11213201","price":23.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213202in.jpg?v=1762418471"},{"product_id":"marking-stamp-usa-bent-shank-1mm","title":"Marking Stamp, \"USA,\" Bent Shank","description":"\u003cp\u003eThis bent marking stamp reads \"USA\"; ideal for quality-marking your designs. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a bent shank have a notch near the tip that makes them ideal for stamping curved surfaces such as the inside of a ring or bangle; the slightly domed striking surface ensure a crisp, clean mark.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":52660364771674,"sku":"11213101","price":31.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213101.jpg?v=1762418581"},{"product_id":"marking-stamp-950plat-bent-shank-1mm-character","title":"Marking Stamp, \"950Plat,\" Bent Shank, Character","description":"\u003cp\u003eThis marking stamp reads \"950Plat\"; ideal for quality-marking designs made with .950-pure platinium. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a bent shank have a notch near the tip that makes them ideal for stamping curved surfaces such as the inside of a ring or bangle; the slightly domed striking surface ensure a crisp, clean mark.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":52660368998746,"sku":"112895","price":31.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112895in1.jpg?v=1762418633"},{"product_id":"24k-marking-stamps-bent-shank","title":"24K Marking Stamps, Bent Shank","description":"\u003cp\u003eThis bent marking stamp reads \"24K\"; ideal for quality-marking your designs. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a bent shank have a notch near the tip that makes them ideal for stamping curved surfaces such as the inside of a ring or bangle; the slightly domed striking surface ensure a crisp, clean mark.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"0.75mm","offer_id":52660836761946,"sku":"11213302","price":23.89,"currency_code":"EUR","in_stock":true},{"title":"1mm","offer_id":52660836794714,"sku":"11213301","price":24.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213302.jpg?v=1762424530"}],"url":"https:\/\/www.amadesa.com\/fi-fi\/collections\/quality-marking-stamps.oembed","provider":"Amadesa","version":"1.0","type":"link"}