{"title":"Nadelfeilen","description":"\u003cp\u003eNadelfeilen sind kleine, präzise Handfeilen, die für detaillierte Formgebungen, das Glätten und Verfeinern von Schmuck im Arbeitsprozess verwendet werden. Sie bieten hervorragende Kontrolle in engen Bereichen, in denen größere Feilen zu grob sind. Ideal zum Anpassen von Teilen, Reinigen von Kanten und Fertigstellen feiner Details während der Herstellung und Werkbankarbeit.\u003c\/p\u003e","products":[{"product_id":"glardon-vallorbe®-barrette-needle-file-cut-3","title":"Glardon Vallorbe® Haarspangen-Nadelfeile, Hieb Nr. 3","description":"Diese Glardon Vallorbe® Haarnadel-Nadelfeile ist ideal zum Verfeinern von flachen Oberflächen sowie engen Bereichen, geraden Kanten und Strukturen sowie Außenkurven. Sie hat eine breitbasige Dreiecksform, die in Breite und Dicke zuläuft, und Zähne nur auf der Unterseite; die Feile ist doppelt geschnitten. Der sichere Rücken verhindert das Abtragen von Metall an angrenzenden Flächen.\n\nDiese Feile hat einen Swiss Cut #3; Swiss-Cut-Feilen werden nach der Anzahl der Zähne bewertet, wobei die Zähne senkrecht zur Längsachse der Feile gezählt werden. Bei allen Schnittarten gilt: Je höher die Zahl, desto feiner der Schnitt.\n\nEine Doppel-Hieb-Feile verfügt über zwei Sätze gleichmäßig verteilter Zähne, die in zwei Richtungen angeordnet sind, wobei einer in einem leicht anderen Winkel als der andere steht. Doppel-Hieb-Feilen sind so konzipiert, dass sie aggressiver schneiden und die Arbeit jedes Schlages maximieren, um mit weniger Schlägen mehr Metall zu entfernen. Am Ende des Schlages sollte die Feile vom Werkstück abgehoben und für den nächsten Schlag neu positioniert werden; das Zurückziehen der Feile gegen das Metall kann das Metall verkratzen und die Zähne beschädigen.\n\nNadelfeilen zeichnen sich durch ein Miniaturprofil mit einer kürzeren Schneidfläche (typischerweise etwa die Hälfte ihrer Länge) und runden, schmalen Griffen aus. Diese kleinen Feilen sind ideal für die Arbeit an feinen Details und in kleinen Bereichen des Werkstücks; sie sind ideal, wenn Zugang und Oberflächenfinish Vorrang vor Materialabtrag haben. Obwohl sie auch ohne Griff verwendet werden können, verbessert das Befestigen der Feile in einem separat erhältlichen Griff die Kontrolle für bessere Präzision und Werkzeugsicherheit.\n\nDie erste Wahl für die meisten Juweliere, Glardon Vallorbe® Feilen werden nach den höchsten Produktionsstandards hergestellt, in der Schweiz aus dem feinsten wärmegehärteten Chromlegierungsstahl gefertigt und auf 65 HRC gehärtet. Die Feilen sind präzisionsgeschliffen, um schnell und genau zu schneiden und länger zu halten als fast jede andere Feile auf dem Markt.\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 200mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTyp:\u003c\/strong\u003e Nadel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm:\u003c\/strong\u003e Haarnadel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchweizer Schnitt:\u003c\/strong\u003e #3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbmessungen der Schneidfläche:\u003c\/strong\u003e 4\"L (101,6mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 0,459 Unzen (13g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Schweiz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarke:\u003c\/strong\u003e Glardon Vallorbe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,013 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50633767911770,"sku":"114355","price":18.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114355_cd12c763-eef6-4717-9571-0e1baf9fa199.jpg?v=1741466392"},{"product_id":"needle-file-set-with-wood-handles-set-of-6","title":"Nadelfeilensatz mit Holzgriffen, 6er-Set","description":"Dieses Set mit Nadelfeilen enthält sechs häufig verwendete Formen, sodass Sie sicher die haben, die Sie brauchen. Jede Feile ist doppelt geschlagen und hat einen ergonomischen Holzgriff. Hergestellt in Deutschland. Diese Feile hat einen deutschen Hieb Nr. 0; deutsche Hiebfeilen werden nach der Anzahl der Zähne sortiert, wobei die Zähne parallel zur Längsachse der Feile gezählt werden. Deutsche Hiebe beginnen gröber als Schweizer und werden feiner, sodass mehr Abstufungen für präziseres Schneiden möglich sind. Bei allen Hiebarten gilt: je höher die Zahl, desto feiner der Hieb. Eine doppelt geschlagene Feile verfügt über zwei Sätze gleichmäßig verteilter Zähne, die in zwei Richtungen angeordnet sind, einer in einem etwas anderen Winkel als der andere. Doppelt geschlagene Feilen sind für einen aggressiveren Schnitt ausgelegt, wodurch die Arbeit jedes Strichs maximiert wird, um mehr Metall mit weniger Strichen zu entfernen. Am Ende des Strichs sollte die Feile vom Werkstück abgehoben und für den nächsten Strich neu positioniert werden; wenn Sie die Feile rückwärts über das Metall ziehen, kann dies das Metall beschädigen und die Zähne beschädigen. Nadelfeilen verfügen über ein Miniaturprofil mit einer kürzeren Schneidfläche (normalerweise etwa halb so lang) und runden, schmalen Griffen. Diese kleinen Feilen sind ideal für die Arbeit an feinen Details und kleinen Bereichen des Werkstücks; sie sind ideal, wenn Zugänglichkeit und Oberflächengüte Vorrang vor Metallabtrag haben. Sie können zwar so verwendet werden, wie sie sind, aber die Sicherung der Feile in einem Griff (separat erhältlich) verbessert die Kontrolle für mehr Präzision und Werkzeugsicherheit.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 171,45 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTyp:\u003c\/strong\u003e Sortiment\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eDeutsche Schnittnummer:\u003c\/strong\u003e #0\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Sortiment\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchweizer Schnitt:\u003c\/strong\u003e #00\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 4\"\"L (101,6 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 3,976 Unzen (112,71 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Deutschland\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,113 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50633768534362,"sku":"114500","price":20.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114500.jpg?v=1741466591"},{"product_id":"needle-file-set-cuts-0-and-2-set-of-12","title":"Nadelfeilensatz, Hiebe Nr. 0 und Nr. 2, 12er-Set","description":"Dieses 12-teilige Nadelfeilenset enthält eine Vielzahl häufig verwendeter Formen in Schweizer Hieb Nr. 0 und Nr. 2. Wenn Sie zwei Hiebe jeder Feilenform zur Hand haben, können Sie leicht von aggressiverem Materialabtrag zu feineren Endarbeiten übergehen. Dieses Nadelfeilenset mit Doppelhieb enthält jeweils zwei (Schweizer Hieb Nr. 0 und Nr. 2) der folgenden Formen: gleichförmig, rund, halbrund, Barrette, dreieckig und quadratisch. Eine Aufbewahrungstasche aus Vinyl ist im Lieferumfang enthalten. Diese Feilen haben einen Schweizer Hieb Nr. 0 und Nr. 2. Schweizer Hiebfeilen werden nach der Anzahl der Zähne sortiert, wobei die Zähne senkrecht zur Längsachse der Feile gezählt werden. Bei allen Hiebarten gilt: Je höher die Zahl, desto feiner der Hieb. Bei allen Hiebarten gilt: Je höher die Zahl, desto feiner der Hieb. Nadelfeilen haben ein Miniaturprofil mit einer kürzeren Schneidfläche (normalerweise etwa die Hälfte ihrer Länge) und runden, schmalen Griffen. Diese kleinen Feilen sind ideal für die Arbeit an feinen Details und in kleinen Bereichen des Werkstücks; sie sind ideal, wenn Zugang und Oberflächengüte Vorrang vor Metallabtrag haben.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 200mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTyp:\u003c\/strong\u003e Nadel\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Sortiment\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchweizer Schliff:\u003c\/strong\u003e #0, #2\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 4\"L (101,6 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 0,607 lbs (0,275 kg)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Portugal\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,275 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50633770271066,"sku":"114845","price":84.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114845.jpg?v=1741467321"},{"product_id":"glardon-vallorbe®-crossing-needle-file-cut-2","title":"Glardon Vallorbe® Kreuznadelfeile, Hieb Nr. 2","description":"Diese sich kreuzende Nadelfeile von Glardon Vallorbe® hat eine doppelte halbrunde Form – jede mit einem anderen Radius – und ist ideal zum Füllen der Innenseiten von Ringschäften und anderen gewölbten Innenflächen geeignet. Die Doppelhiebfeile läuft über ihre Länge in Breite und Dicke spitz zu. An den Kanten treffen die gewölbten Seiten in einem spitzen Winkel aufeinander. Diese Feile hat einen Schweizer Hieb Nr. 2. Schweizer Hiebfeilen werden nach der Anzahl der Zähne sortiert, wobei die Zähne senkrecht zur Längsachse der Feile gezählt werden. Bei allen Hiebarten gilt: Je höher die Zahl, desto feiner der Hieb. Eine Doppelhiebfeile hat zwei Sätze gleichmäßig verteilter Zähne, die in zwei Richtungen angeordnet sind, einer in einem etwas anderen Winkel als der andere. Doppelhiebfeilen sind für einen aggressiveren Schnitt ausgelegt, wodurch die Arbeit jedes Strichs maximiert wird und mehr Metall mit weniger Strichen entfernt werden kann. Am Ende des Strichs sollte die Feile vom Werkstück gehoben und für den nächsten Strich neu positioniert werden. Wenn Sie die Feile rückwärts über das Metall ziehen, kann das Metall beschädigt werden und die Zähne können Schaden nehmen. Nadelfeilen haben ein Miniaturprofil mit einer kürzeren Schneidfläche (normalerweise etwa halb so lang) und runden, schmalen Griffen. Diese kleinen Feilen sind ideal für die Arbeit an feinen Details und in kleinen Bereichen des Werkstücks; sie sind ideal, wenn Zugang und Oberflächengüte Vorrang vor Metallentfernung haben. Obwohl sie so verwendet werden können, wie sie sind, verbessert die Sicherung der Feile in einem Griff (separat erhältlich) die Kontrolle für mehr Präzision und Werkzeugsicherheit. Glardon Vallorbe®-Feilen sind die erste Wahl für die meisten Juweliere und werden nach den höchsten Produktionsstandards in der Schweiz aus feinstem wärmebehandeltem Chromlegierungsstahl hergestellt, der auf 65 HRC gehärtet ist. Die Feilen sind präzisionsgeschliffen, um schnell und präzise zu schneiden und länger zu halten als nahezu jede andere Feile auf dem Markt.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 160mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTyp:\u003c\/strong\u003e Nadel\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Kreuzung\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchweizer Schliff:\u003c\/strong\u003e #2\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 3\"L (76,2 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMarke:\u003c\/strong\u003e Glardon Vallorbe\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 0,444 Unzen (12,6 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Schweiz\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,013 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50633771417946,"sku":"114978","price":15.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114978.jpg?v=1741468281"},{"product_id":"glardon-vallorbe®-barrette-needle-file-cut-5","title":"Glardon Vallorbe® Haarspangen-Nadelfeile, Hieb Nr. 2","description":"Diese Barrette-Nadelfeile von Glardon Vallorbe® ist ideal zum Verfeinern von flachen Oberflächen sowie schmalen Bereichen, geraden Kanten und Strukturen und Außenkurven. Sie hat eine breitbasige Dreiecksform, die sich in Breite und Dicke verjüngt, und hat Zähne nur auf der Unterseite; die Feile ist doppelt gehieb. Die sichere Rückseite verhindert das Entfernen von Metall von angrenzenden Oberflächen.Diese Feile hat einen Schweizer Hieb Nr. 2; Schweizer Hiebfeilen werden nach der Anzahl der Zähne sortiert, wobei die Zähne senkrecht zur Längsachse der Feile gezählt werden. Bei allen Hiebarten gilt: Je höher die Zahl, desto feiner der Hieb.Eine Doppelhiebfeile verfügt über zwei Sätze gleichmäßig verteilter Zähne, die in zwei Richtungen angeordnet sind, einer in einem etwas anderen Winkel als der andere. Doppelhiebfeilen sind für einen aggressiveren Schnitt konzipiert, wodurch die Arbeit jedes Strichs maximiert wird und mehr Metall mit weniger Strichen entfernt werden kann. Am Ende des Strichs sollte die Feile vom Werkstück gehoben und für den nächsten Strich neu positioniert werden; Wenn Sie die Feile rückwärts über das Metall ziehen, kann das Metall beschädigt werden und die Zähne können Schaden nehmen. Nadelfeilen haben ein Miniaturprofil mit einer kürzeren Schneidfläche (normalerweise etwa halb so lang) und runden, schmalen Griffen. Diese kleinen Feilen sind ideal für die Arbeit an feinen Details und in kleinen Bereichen des Werkstücks; sie sind ideal, wenn Zugang und Oberflächengüte Vorrang vor Metallentfernung haben. Obwohl sie so verwendet werden können, wie sie sind, verbessert die Sicherung der Feile in einem Griff (separat erhältlich) die Kontrolle für mehr Präzision und Werkzeugsicherheit. Glardon Vallorbe®-Feilen sind die erste Wahl für die meisten Juweliere und werden nach den höchsten Produktionsstandards in der Schweiz aus feinstem wärmebehandeltem Chromlegierungsstahl hergestellt, der auf 65 HRC gehärtet ist. Die Feilen sind präzisionsgeschliffen, um schnell und präzise zu schneiden und länger zu halten als nahezu jede andere Feile auf dem Markt.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 160mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTyp:\u003c\/strong\u003e Nadel\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Haarspange\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchweizer Schliff:\u003c\/strong\u003e #2\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 3\"L (76,2 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMarke:\u003c\/strong\u003e Glardon Vallorbe\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 0,372 Unzen (10,56 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Schweiz\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,011 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50633771450714,"sku":"114999","price":10.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114999.jpg?v=1741468348"},{"product_id":"ultra-thin-micro-flex-file-fine","title":"Ultradünne Micro-Flex-Feile, fein","description":"Diese ultradünne Micro-Flex-Feile ist ideal zum Formen und Glätten von Kurven und ihre unglaubliche Flexibilität ermöglicht Ihnen den einfachen Zugang zu feinen Details und anderen schwer erreichbaren Bereichen. Diese Feile hat feine, doppelt geschliffene Zähne (128 Zähne pro 25 mm Länge) und ist 0,5 mm dick. Eine doppelt geschliffene Feile verfügt über zwei Sätze gleichmäßig verteilter Zähne, die in zwei Richtungen angeordnet sind, wobei einer in einem etwas anderen Winkel als der andere steht. Doppelt geschliffene Feilen sind für einen aggressiveren Schnitt ausgelegt, wodurch die Arbeit jedes Strichs maximiert wird, um mehr Metall mit weniger Strichen zu entfernen. Am Ende des Strichs sollte die Feile vom Werkstück abgehoben und für den nächsten Strich neu positioniert werden; wenn Sie die Feile rückwärts über das Metall ziehen, kann dies das Metall beschädigen und die Zähne beschädigen.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 140mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Flach\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 1,77\"L x 0,24\"B (44,96 x 6,1 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaschenweite:\u003c\/strong\u003e Fein\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 0,889 Unzen (25,2 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Japan\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,025 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Amadesa","offers":[{"title":"Gut","offer_id":50648407114074,"sku":"114038","price":40.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114038in_b930c7f3-67d7-43e1-9937-823530a51b76.jpg?v=1741587337"},{"product_id":"ultra-thin-micro-flex-file-medium","title":"Ultradünne Micro-Flex-Feile, mittel","description":"Diese ultradünne Micro-Flex-Feile ist ideal zum Formen und Glätten von Kurven und ihre unglaubliche Flexibilität ermöglicht Ihnen den einfachen Zugang zu feinen Details und anderen schwer erreichbaren Bereichen. Diese Feile hat mittlere, doppelt geschliffene Zähne (70 Zähne pro 25 mm Länge) und ist 0,5 mm dick. Eine doppelt geschliffene Feile verfügt über zwei Sätze gleichmäßig verteilter Zähne, die in zwei Richtungen angeordnet sind, wobei einer in einem etwas anderen Winkel als der andere steht. Doppelt geschliffene Feilen sind für einen aggressiveren Schnitt ausgelegt, wodurch die Arbeit jedes Strichs maximiert wird, um mehr Metall mit weniger Strichen zu entfernen. Am Ende des Strichs sollte die Feile vom Werkstück abgehoben und für den nächsten Strich neu positioniert werden; wenn Sie die Feile rückwärts über das Metall ziehen, kann dies das Metall beschädigen und die Zähne beschädigen.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 140mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Flach\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 1,77\"L x 0,24\"B (44,96 x 6,1 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaschenweite:\u003c\/strong\u003e Mittel\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 0,889 Unzen (25,2 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Japan\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,025 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50678197977434,"sku":"114039","price":19.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114039in_6e69a542-6fc7-4d4f-bb54-5bb27f7aadae.jpg?v=1741587345"},{"product_id":"pocket-needle-file-set-cut-2-set-of-6","title":"Taschennadelfeilen-Set, Hieb Nr. 2, 6er-Set","description":"Dieses Nadelfeilenset im Taschenformat bietet sechs Feilen mit verkürztem Schaft, die mehr Schneidfläche und bessere Kontrolle beim Feilen bieten; sie sind ideal für den Zugriff auf feine Details. Dieses Set stellt sicher, dass Sie die Feilenform haben, die Sie für alle Ihre Schmuckdesigns benötigen, und der hohle Schaft des Griffs aus eloxiertem Aluminium dient gleichzeitig als praktischer Halter für unbenutzte Feilen. Zum Gebrauch legen Sie eine Feile in die Griffspannzange ein, um die Feilen schnell und einfach wechseln zu können. Dieses Set enthält jeweils eine der folgenden Formen: gleichförmig, rund, halbrund, Barrette, dreieckig und quadratisch.\n\n Diese Feilen haben einen Schweizer Hieb Nr. 2; Schweizer Hiebfeilen werden nach der Anzahl der Zähne sortiert, wobei die Zähne senkrecht zur Längsachse der Feile gezählt werden. Bei allen Hiebarten gilt: Je höher die Zahl, desto feiner der Hieb.\n \nNadelfeilen haben ein Miniaturprofil mit einer kürzeren Schneidfläche (normalerweise etwa halb so lang) und runden, schmalen Griffen. Diese kleinen Feilen sind ideal für die Arbeit an feinen Details und kleinen Bereichen des Werkstücks; sie sind ideal, wenn Zugang und Oberflächengüte Vorrang vor dem Metallabtrag haben.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 101 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTyp:\u003c\/strong\u003e Nadel\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Sortiment\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchweizer Schliff:\u003c\/strong\u003e #2\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 2,25\"L (57,15 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 3,094 Unzen (87,724 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Vereinigte Staaten\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,088 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50678219604314,"sku":"114260","price":33.71,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114260_910ac28f-5dda-4beb-bcd6-b1ba660e5984.jpg?v=1741587545"},{"product_id":"pocket-needle-file-set-cut-2-set-of-7","title":"Taschennadelfeilen-Set, Hieb Nr. 2, 6er-Set","description":"Dieses Nadelfeilenset im Taschenformat bietet sechs Feilen mit verkürztem Schaft, die mehr Schneidfläche und bessere Kontrolle beim Feilen bieten; sie sind ideal für den Zugriff auf feine Details. Dieses Set stellt sicher, dass Sie die Feilenform haben, die Sie für alle Ihre Schmuckdesigns benötigen, und der hohle Schaft des Griffs aus eloxiertem Aluminium dient gleichzeitig als praktischer Halter für unbenutzte Feilen. Zum Gebrauch legen Sie eine Feile in die Griffspannzange ein, um die Feilen schnell und einfach wechseln zu können. Dieses Set enthält jeweils eine der folgenden Formen: gleichförmig, rund, halbrund, Barrette, dreieckig und quadratisch.\n\n Diese Feilen haben einen Schweizer Hieb Nr. 2; Schweizer Hiebfeilen werden nach der Anzahl der Zähne sortiert, wobei die Zähne senkrecht zur Längsachse der Feile gezählt werden. Bei allen Hiebarten gilt: Je höher die Zahl, desto feiner der Hieb.\n \nNadelfeilen haben ein Miniaturprofil mit einer kürzeren Schneidfläche (normalerweise etwa halb so lang) und runden, schmalen Griffen. Diese kleinen Feilen sind ideal für die Arbeit an feinen Details und kleinen Bereichen des Werkstücks; sie sind ideal, wenn Zugang und Oberflächengüte Vorrang vor dem Metallabtrag haben.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 101 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTyp:\u003c\/strong\u003e Nadel\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Sortiment\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchweizer Schliff:\u003c\/strong\u003e #2\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 1,75\"L (44,45 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 1,981 Unzen (56,16 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e China\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,056 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50678219931994,"sku":"114262","price":18.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114262.jpg?v=1764174632"},{"product_id":"friedrich-dick-knife-needle-file-cut-5","title":"Friedrich Dick Messer-Nadelfeile, Hieb Nr. 5","description":"Diese Nadelfeile von Friedrich Dick ist ideal für schmale Öffnungen, abgewinkelte Verbindungen und kleine Details wie Zinken. Sie hat flache Seiten und Kanten, wobei eine Kante dicker ist als die andere, sodass die Seiten nach innen abgewinkelt sind. Diese Doppelhiebfeile hat Zähne auf beiden Seiten und an der schmalen Kante und läuft zu einer feinen Spitze hin aus. Die glatte, breitere Kante hilft, gefasste Steine ​​und angrenzende Strukturen vor zufälligem Kontakt mit Schneidflächen zu schützen. Diese Feile hat einen deutschen Hieb Nr. 5; Feilen mit deutschem Hieb werden nach der Anzahl der Zähne eingestuft, wobei die Zähne parallel zur Längsachse der Feile gezählt werden. Deutsche Hiebe beginnen gröber als Schweizer und werden feiner, sodass mehr Abstufungen für präziseres Schneiden möglich sind. Bei allen Hiebarten gilt: Je höher die Zahl, desto feiner der Hieb. Eine Doppelhiebfeile verfügt über zwei Sätze gleichmäßig verteilter Zähne, die in zwei Richtungen angeordnet sind, einer in einem etwas anderen Winkel als der andere. Doppelhiebfeilen sind für ein aggressiveres Schneiden ausgelegt, wodurch die Arbeit jedes Strichs maximiert wird und mehr Metall mit weniger Strichen entfernt werden kann. Am Ende des Strichs sollte die Feile vom Werkstück abgehoben und für den nächsten Strich neu positioniert werden. Wenn Sie die Feile rückwärts über das Metall ziehen, kann dies das Metall beschädigen und die Zähne beschädigen. Nadelfeilen haben ein Miniaturprofil mit einer kürzeren Schneidfläche (normalerweise etwa halb so lang) und runden, schmalen Griffen. Diese kleinen Feilen sind ideal für die Arbeit an feinen Details und in kleinen Bereichen des Werkstücks. Sie sind ideal, wenn Zugang und Oberflächengüte Vorrang vor dem Metallabtrag haben. Obwohl sie so verwendet werden können, wie sie sind, verbessert die Sicherung der Feile in einem Griff (separat erhältlich) die Kontrolle für mehr Präzision und Werkzeugsicherheit. Friedrich Dick-Feilen gehören zu den besten Juwelierfeilen der Welt. Sie werden aus einer robusten Chrom-\/Werkzeugstahllegierung hergestellt und präzise bearbeitet, um scharfe Ecken und feine Spitzen zu erzielen. Diese Feilen haben tief geschnittene Zähne, die einen effizienten, gleichmäßigen Materialabtrag ermöglichen. Sie haben eine Härte von 66–67 HRC für außergewöhnlichen Service bei minimalem Pflegeaufwand.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 160mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTyp:\u003c\/strong\u003e Nadel\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eDeutsche Schnittnummer:\u003c\/strong\u003e #5\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Messer\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchweizer Schnitt:\u003c\/strong\u003e #4\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 3,13\" L x 0,19\" B (79,5 x 4,83 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMarke:\u003c\/strong\u003e Friedrich Dick\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 0,03 lbs (13,608 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Schweiz\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,014 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Friedrich Dick","offers":[{"title":"Default Title","offer_id":50678240346458,"sku":"114745","price":11.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114745.jpg?v=1763189329"},{"product_id":"grobet®-swiss-pattern-needle-files-cut-4-set-of-12","title":"Grobet® Schweizer Nadelfeilen, Hieb Nr. 4, 12er-Set","description":"\u003cp\u003eDieses 12-teilige Set von Nadelfeilen umfasst gängige Feilenformen und stellt sicher, dass Sie für alle Ihre Schmuckdesigns die passende Feilenform zur Hand haben. Dieses Sortiment enthält jeweils eine Feile der folgenden Formen: Barrette, Crossing, Equalling, Halbrund, Gelenk mit rundem Rand, Messer, Markierfeile, Rund, Spalt, Quadrat, Dreieck und Warding. Diese Feilen haben einen Swiss Cut #4; Swiss-Cut-Feilen werden nach der Anzahl der Zähne bewertet, wobei die Zähne senkrecht zur Längsachse der Feile gezählt werden. Bei allen Schnittarten gilt: Je höher die Zahl, desto feiner der Schnitt. Nadelfeilen zeichnen sich durch ein Miniaturprofil mit einer kürzeren Schneidefläche (typischerweise etwa die Hälfte ihrer Länge) und runden, schmalen Griffen aus. Diese kleinen Feilen sind ideal für die Bearbeitung feiner Details und kleiner Bereiche des Werkstücks; sie sind optimal, wenn Zugang und Oberflächenfinish wichtiger sind als Materialabtrag. Obwohl sie auch ohne Griff verwendet werden können, verbessert das Einspannen der Feile in einen Griff (separat erhältlich) die Kontrolle für bessere Präzision und Arbeitssicherheit.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50678244049242,"sku":"114773","price":126.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114773.jpg?v=1764174737"},{"product_id":"friedrich-dick-needle-file-set-cut-2-set-of-6","title":"Friedrich Dick Nadelfeilensatz, Hieb Nr. 2, 6er Set","description":"Dieses Nadelfeilenset von Friedrich Dick enthält eine Auswahl der sechs am häufigsten verwendeten Feilenformen und stellt sicher, dass Sie für alle Ihre Schmuckdesigns die benötigte Feilenform haben. Jede Feile hat einen bequemen Griff mit einem drehbaren Endknopf, der hervorragende Manövrierbarkeit, Werkzeugsicherheit und Komfort beim Feilen bietet. Dieses Nadelfeilenset mit Doppelhieb enthält eine Feilenform jeder Form: gleichförmig, rund, halbrund, Barrette, dreieckig und quadratisch. Eine Aufbewahrungshülle aus Kunststoff ist im Lieferumfang enthalten.\n \nDiese Feilen haben einen deutschen Hieb Nr. 2; Feilen mit deutschem Hieb werden nach der Anzahl der Zähne sortiert, wobei die Zähne parallel zur Längsachse der Feile gezählt werden. Deutsche Hiebe beginnen gröber als Schweizer Hiebe und werden feiner, sodass mehr Abstufungen für präziseres Schneiden möglich sind. Bei allen Hiebarten gilt: Je höher die Zahl, desto feiner der Hieb.\n\n Nadelfeilen haben ein Miniaturprofil mit einer kürzeren Schneidfläche (normalerweise etwa halb so lang) und runden, schmalen Griffen. Diese kleinen Feilen sind ideal für die Arbeit an feinen Details und kleinen Bereichen des Werkstücks; sie sind ideal, wenn Zugang und Oberflächengüte Vorrang vor dem Metallabtrag haben.\n\n Die Feilen von Friedrich Dick zählen zu den besten Juwelierfeilen der Welt. Sie bestehen aus einer robusten Chrom-\/Werkzeugstahllegierung und sind präzise bearbeitet, um scharfe Ecken und feine Spitzen zu erzielen. Diese Feilen haben tief geschnittene Zähne, die für einen effizienten, gleichmäßigen Materialabtrag sorgen. Sie haben eine Härte von 66–67 HRC und sind daher außergewöhnlich langlebig und erfordern nur minimalen Pflegeaufwand.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 200mm\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eTyp:\u003c\/strong\u003e Nadel\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eDeutsche Schnittnummer:\u003c\/strong\u003e #2\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Sortiment\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchweizer Schnitt:\u003c\/strong\u003e #1\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 2,75\"L (69,85 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMarke:\u003c\/strong\u003e Friedrich Dick\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 5,105 Unzen (144,72 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Schweiz\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,145 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Friedrich Dick","offers":[{"title":"Default Title","offer_id":50678247653722,"sku":"114816","price":85.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114816.jpg?v=1764217702"},{"product_id":"glardon-vallorbe®-needle-file-set-cut-2-set-of-12","title":"Glardon Vallorbe® Nadelfeilen-Set, Hieb Nr. 2, 12er-Set","description":"Dieses Set mit Präzisionsnadelfeilen von Glardon Vallorbe® umfasst eine Auswahl von 12 Feilenformen und stellt sicher, dass Sie für alle Ihre Schmuckdesigns die benötigte Feilenform haben. Mit jeder Doppelhiebfeile können Sie schmale Rillen und Oberflächen erreichen und verfeinern, die mit größeren Feilen nicht erreichbar sind. Dieses Nadelfeilenset umfasst eine Feilenform jeder Form: Dreikant, Rund, Quadrat, Häkel-, Messer-, Oval-, Halbrund-, Gleichrund-, Kreuz-, Barrette-, Spitz- und Gleichrund- (Rundkante).\n \nDiese Feilen haben einen Schweizer Hieb Nr. 2; Schweizer Hiebfeilen werden nach der Anzahl der Zähne sortiert, wobei die Zähne senkrecht zur Längsachse der Feile gezählt werden. Bei allen Hiebarten gilt: je höher die Zahl, desto feiner der Hieb. Bei allen Hiebarten gilt: je höher die Zahl, desto feiner der Hieb.\n\n Nadelfeilen haben ein Miniaturprofil mit einer kürzeren Schneidfläche (normalerweise etwa halb so lang) und runden, schmalen Griffen. Diese kleinen Feilen sind ideal für die Arbeit an feinen Details und in kleinen Bereichen des Werkstücks; sie sind ideal, wenn Zugang und Oberflächengüte Vorrang vor Metallentfernung haben. Obwohl sie so verwendet werden können, wie sie sind, verbessert die Sicherung der Feile in einem Griff (separat erhältlich) die Kontrolle für mehr Präzision und Werkzeugsicherheit.\n \nGlardon Vallorbe®-Feilen sind die erste Wahl der meisten Juweliere und werden nach höchsten Produktionsstandards in der Schweiz aus feinstem, wärmebehandeltem Chromlegierungsstahl hergestellt, der auf 65 HRC gehärtet ist. Die Feilen sind präzisionsgeschliffen, um schnell und präzise zu schneiden und länger zu halten als nahezu jede andere Feile auf dem Markt.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 160mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTyp:\u003c\/strong\u003e Nadel\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Sortiment\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchweizer Schliff:\u003c\/strong\u003e #2\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 3,25\"L (82,55 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMarke:\u003c\/strong\u003e Glardon Vallorbe\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 4,868 Unzen (138 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Schweiz\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,138 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50678279078234,"sku":"114933","price":139.38,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114933.jpg?v=1764174819"},{"product_id":"glardon-vallorbe®-equalling-needle-file-cut-2","title":"Glardon Vallorbe® Gleichförmige Nadelfeile, Hieb Nr. 2","description":"Diese Glardon Vallorbe®-Nadelfeile ist ideal zum Formen von Schlitzen und Ecken, zum Glätten und Verfeinern von flachen Oberflächen und zum Formen von Öffnungen. Die flache Feile mit parallelen Seiten und Kanten hat Zähne auf der Ober- und Unterseite sowie an beiden Kanten. Diese Feile hat einen Schweizer Hieb Nr. 2. Schweizer Hiebfeilen werden nach der Anzahl der Zähne sortiert, wobei die Zähne senkrecht zur Längsachse der Feile gezählt werden. Bei allen Hiebarten gilt: Je höher die Zahl, desto feiner der Hieb. Eine Doppelhiebfeile verfügt über zwei Sätze gleichmäßig verteilter Zähne, die in zwei Richtungen angeordnet sind, einer in einem etwas anderen Winkel als der andere. Doppelhiebfeilen sind für einen aggressiveren Schnitt ausgelegt, wodurch die Arbeit jedes Strichs maximiert wird, um mehr Metall mit weniger Strichen zu entfernen. Am Ende des Strichs sollte die Feile vom Werkstück abgehoben und für den nächsten Strich neu positioniert werden. Wenn Sie die Feile rückwärts über das Metall ziehen, kann dies das Metall beschädigen und die Zähne beschädigen. Nadelfeilen verfügen über ein Miniaturprofil mit einer kürzeren Schneidfläche (normalerweise etwa halb so lang) und runden, schmalen Griffen. Diese kleinen Feilen sind ideal für die Arbeit an feinen Details und kleinen Bereichen des Werkstücks; sie sind ideal, wenn Zugang und Oberflächengüte Vorrang vor Metallentfernung haben. Obwohl sie so verwendet werden können, wie sie sind, verbessert die Sicherung der Feile in einem Griff (separat erhältlich) die Kontrolle für mehr Präzision und Werkzeugsicherheit. Die Feilen von Glardon Vallorbe® sind die erste Wahl für die meisten Juweliere und werden nach den höchsten Produktionsstandards in der Schweiz aus feinstem, wärmebehandeltem Chromlegierungsstahl hergestellt, der auf 65 HRC gehärtet ist. Die Feilen sind präzisionsgeschliffen, um schnell und präzise zu schneiden und länger zu halten als nahezu jede andere Feile auf dem Markt.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 160mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTyp:\u003c\/strong\u003e Nadel\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Gleichförmig\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchweizer Schliff:\u003c\/strong\u003e #2\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 3\"L (76,2 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMarke:\u003c\/strong\u003e Glardon Vallorbe\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 0,436 Unzen (12,36 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Schweiz\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,012 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50678290612570,"sku":"114972","price":10.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114972.jpg?v=1763118692"},{"product_id":"glardon-vallorbe®-knife-needle-file-cut-3","title":"Glardon Vallorbe® Messernadelfeile, Hieb Nr. 2","description":"Diese Messernadelfeile von Glardon Vallorbe® ist ideal für den Zugang zu engen Öffnungen, abgewinkelten Verbindungen und kleinen Merkmalen wie Zinken. Sie hat flache Seiten und Kanten, wobei eine Kante dicker ist als die andere, sodass die Seiten nach innen geneigt sind. Diese Doppelhiebfeile mit Zähnen auf beiden Seiten und an der schmalen Kante läuft zu einer feinen Spitze zu. Die glatte, breitere Kante hilft, gefasste Steine ​​und angrenzende Strukturen vor zufälligem Kontakt mit Schneidflächen zu schützen.Diese Feile hat einen Schweizer Hieb Nr. 2. Schweizer Hiebfeilen werden nach der Anzahl der Zähne sortiert, wobei die Zähne senkrecht zur Längsachse der Feile gezählt werden. Bei allen Hiebarten gilt: Je höher die Zahl, desto feiner der Hieb.Eine Doppelhiebfeile verfügt über zwei Sätze gleichmäßig verteilter Zähne, die in zwei Richtungen angeordnet sind, einer in einem etwas anderen Winkel als der andere. Doppelhiebfeilen sind für einen aggressiveren Schnitt konzipiert, wodurch die Arbeit jedes Strichs maximiert wird und mehr Metall mit weniger Strichen entfernt werden kann. Am Ende des Strichs sollte die Feile vom Werkstück gehoben und für den nächsten Strich neu positioniert werden. Wenn Sie die Feile rückwärts über das Metall ziehen, kann das Metall beschädigt werden und die Zähne können Schaden nehmen. Nadelfeilen haben ein Miniaturprofil mit einer kürzeren Schneidfläche (normalerweise etwa halb so lang) und runden, schmalen Griffen. Diese kleinen Feilen sind ideal für die Arbeit an feinen Details und in kleinen Bereichen des Werkstücks; sie sind ideal, wenn Zugang und Oberflächengüte Vorrang vor Metallentfernung haben. Obwohl sie so verwendet werden können, wie sie sind, verbessert die Sicherung der Feile in einem Griff (separat erhältlich) die Kontrolle für mehr Präzision und Werkzeugsicherheit. Glardon Vallorbe®-Feilen sind die erste Wahl für die meisten Juweliere und werden nach den höchsten Produktionsstandards in der Schweiz aus feinstem wärmebehandeltem Chromlegierungsstahl hergestellt, der auf 65 HRC gehärtet ist. Die Feilen sind präzisionsgeschliffen, um schnell und präzise zu schneiden und länger zu halten als nahezu jede andere Feile auf dem Markt.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 160mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTyp:\u003c\/strong\u003e Nadel\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Messer\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchweizer Schliff:\u003c\/strong\u003e #2\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 3\"L (76,2 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMarke:\u003c\/strong\u003e Glardon Vallorbe\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 0,389 Unzen (11,04 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Schweiz\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,011 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50678291038554,"sku":"114981","price":12.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114981.jpg?v=1762884493"},{"product_id":"glardon-vallorbe®-warding-needle-file-cut-2","title":"Glardon Vallorbe® Nadelfeile, Hieb Nr. 2","description":"Diese Glardon Vallorbe®-Nadelfeile zum Einstechen ist ideal zum Formen von Schlitzen und Ecken, zum Entfernen von Graten, zum Formen enger Öffnungen und zum Anbringen von Kerben. Die Feile ist flach und etwas dünner als eine Flachfeile, mit parallelen Seiten und Kanten, die in der Breite spitz zulaufen; sie hat Zähne an der Ober-, Unterseite und an beiden Kanten. Diese Feile hat einen Schweizer Hieb Nr. 2; Schweizer Hiebfeilen werden nach der Anzahl der Zähne sortiert, wobei die Zähne senkrecht zur Längsachse der Feile gezählt werden. Bei allen Hiebarten gilt: Je höher die Zahl, desto feiner der Hieb. Nadelfeilen haben ein Miniaturprofil mit einer kürzeren Schneidfläche (normalerweise etwa halb so lang) und runden, schmalen Griffen. Diese kleinen Feilen sind ideal zum Bearbeiten feiner Details und kleiner Bereiche des Werkstücks; sie sind ideal, wenn Zugang und Oberflächengüte Vorrang vor Metallentfernung haben. Obwohl sie so verwendet werden können, wie sie sind, verbessert die Sicherung der Feile in einem Griff (separat erhältlich) die Kontrolle für mehr Präzision und Werkzeugsicherheit. Die Feilen von Glardon Vallorbe® sind die erste Wahl für die meisten Juweliere und werden nach den höchsten Produktionsstandards in der Schweiz aus feinstem, wärmebehandeltem Chromlegierungsstahl hergestellt, der auf 65 HRC gehärtet ist. Die Feilen sind präzisionsgeschliffen, um schnell und präzise zu schneiden und länger zu halten als nahezu jede andere Feile auf dem Markt.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 160mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTyp:\u003c\/strong\u003e Nadel\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Abwehrend\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchweizer Schliff:\u003c\/strong\u003e #2\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 3\"L (76,2 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMarke:\u003c\/strong\u003e Glardon Vallorbe\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 0,415 Unzen (11,76 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Schweiz\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,012 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50678291169626,"sku":"114984","price":11.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114984.jpg?v=1763118815"},{"product_id":"glardon-vallorbe®-three-square-needle-file-cut-2","title":"Glardon Vallorbe® Dreikant-Nadelfeilen, Hieb Nr. 2","description":"Diese Glardon Vallorbe®-Nadelfeile mit dreieckigem (dreieckigem) Schnitt ist ideal zum Feilen von Ecken, Kanten, scharfen Winkeln und Knicken oder Falten; sie ist auch nützlich zum Formen der Zinken an Marquise- oder Birnenfassungen. Die Feile hat drei flache Seiten gleicher Breite, die sich zu einer feinen Spitze verjüngen, und die Kanten sind abgerundet, um benachbarte Strukturen beim Feilen zu schützen. Diese Feile hat einen Schweizer Hieb Nr. 2; Schweizer Hiebfeilen werden nach der Anzahl der Zähne sortiert, wobei die Zähne senkrecht zur Längsachse der Feile gezählt werden. Bei allen Hiebarten gilt: Je höher die Zahl, desto feiner der Hieb. Nadelfeilen haben ein Miniaturprofil mit einer kürzeren Schneidfläche (normalerweise etwa halb so lang) und runden, schmalen Griffen. Diese kleinen Feilen sind ideal zum Arbeiten an feinen Details und in kleinen Bereichen des Werkstücks; sie sind ideal, wenn Zugang und Oberflächengüte Vorrang vor dem Metallabtrag haben. Obwohl sie so verwendet werden können, wie sie sind, verbessert die Sicherung der Feile in einem Griff (separat erhältlich) die Kontrolle für mehr Präzision und Werkzeugsicherheit. Die Feilen von Glardon Vallorbe® sind die erste Wahl für die meisten Juweliere und werden nach den höchsten Produktionsstandards in der Schweiz aus feinstem, wärmebehandeltem Chromlegierungsstahl hergestellt, der auf 65 HRC gehärtet ist. Die Feilen sind präzisionsgeschliffen, um schnell und präzise zu schneiden und länger zu halten als nahezu jede andere Feile auf dem Markt.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 160mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTyp:\u003c\/strong\u003e Nadel\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Dreieckig\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchweizer Schliff:\u003c\/strong\u003e #2\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 3\"L (76,2 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMarke:\u003c\/strong\u003e Glardon Vallorbe\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 0,432 Unzen (12,24 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Schweiz\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,012 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50678291235162,"sku":"114987","price":11.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114987.jpg?v=1763118871"},{"product_id":"glardon-vallorbe®-square-needle-file-cut-3","title":"Glardon Vallorbe® Quadratische Nadelfeile, Hieb Nr. 2","description":"Diese quadratische Nadelfeile von Glardon Vallorbe® ist ideal zum Einritzen von Linien beim Erstellen von Biegungen und zum Formen, Glätten oder Verfeinern von 90°-Winkeln. Die Feile ist gleichmäßig breit und dick, verjüngt sich zu einer feinen Spitze und hat Zähne auf allen vier Seiten. Diese Feile hat einen Schweizer Hieb Nr. 2; Schweizer Hiebfeilen werden nach der Anzahl der Zähne sortiert, wobei die Zähne senkrecht zur Längsachse der Feile gezählt werden. Bei allen Hiebarten gilt: Je höher die Zahl, desto feiner der Hieb. Nadelfeilen haben ein Miniaturprofil mit einer kürzeren Schneidfläche (normalerweise etwa halb so lang) und runden, schmalen Griffen. Diese kleinen Feilen sind ideal für die Arbeit an feinen Details und in kleinen Bereichen des Werkstücks; sie sind ideal, wenn Zugang und Oberflächengüte Vorrang vor Metallentfernung haben. Obwohl sie so verwendet werden können, wie sie sind, verbessert die Sicherung der Feile in einem Griff (separat erhältlich) die Kontrolle für mehr Präzision und Werkzeugsicherheit. Die Feilen von Glardon Vallorbe® sind die erste Wahl für die meisten Juweliere und werden nach den höchsten Produktionsstandards in der Schweiz aus feinstem, wärmebehandeltem Chromlegierungsstahl hergestellt, der auf 65 HRC gehärtet ist. Die Feilen sind präzisionsgeschliffen, um schnell und präzise zu schneiden und länger zu halten als nahezu jede andere Feile auf dem Markt.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 160mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTyp:\u003c\/strong\u003e Nadel\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Quadratisch\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchweizer Schliff:\u003c\/strong\u003e #2\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 3\"L (76,2 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMarke:\u003c\/strong\u003e Glardon Vallorbe\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 0,364 Unzen (10,32 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Schweiz\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,01 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50678291497306,"sku":"114990","price":12.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114990.jpg?v=1763119067"},{"product_id":"glardon-vallorbe®-oval-needle-file-cut-2","title":"Glardon Vallorbe® Ovale Nadelfeile, Hieb Nr. 2","description":"Diese ovale Nadelfeile von Glardon Vallorbe® ist ideal zum Feilen von gekrümmten Innenflächen, Öffnungen und detaillierten Konturen. Sie ist vollständig abgerundet und hat Zähne rundherum; Breite und Dicke der Feile laufen zu einer feinen Spitze aus. Diese Feile hat einen Schweizer Hieb Nr. 2; Schweizer Hiebfeilen werden nach der Anzahl der Zähne sortiert, wobei die Zähne senkrecht zur Längsachse der Feile gezählt werden. Bei allen Hiebarten gilt: Je höher die Zahl, desto feiner der Hieb. Eine Doppelhiebfeile verfügt über zwei Sätze gleichmäßig verteilter Zähne, die in zwei Richtungen angeordnet sind, einer in einem etwas anderen Winkel als der andere. Doppelhiebfeilen sind für einen aggressiveren Schnitt ausgelegt, wodurch die Arbeit jedes Strichs maximiert wird, um mehr Metall mit weniger Strichen zu entfernen. Am Ende des Strichs sollte die Feile vom Werkstück abgehoben und für den nächsten Strich neu positioniert werden; wenn Sie die Feile rückwärts über das Metall ziehen, kann dies das Metall beschädigen und die Zähne beschädigen. Nadelfeilen verfügen über ein Miniaturprofil mit einer kürzeren Schneidfläche (normalerweise etwa halb so lang) und runden, schmalen Griffen. Diese kleinen Feilen sind ideal für die Arbeit an feinen Details und kleinen Bereichen des Werkstücks; sie sind ideal, wenn Zugang und Oberflächengüte Vorrang vor Metallentfernung haben. Obwohl sie so verwendet werden können, wie sie sind, verbessert die Sicherung der Feile in einem Griff (separat erhältlich) die Kontrolle für mehr Präzision und Werkzeugsicherheit. Die Feilen von Glardon Vallorbe® sind die erste Wahl für die meisten Juweliere und werden nach den höchsten Produktionsstandards in der Schweiz aus feinstem, wärmebehandeltem Chromlegierungsstahl hergestellt, der auf 65 HRC gehärtet ist. Die Feilen sind präzisionsgeschliffen, um schnell und präzise zu schneiden und länger zu halten als nahezu jede andere Feile auf dem Markt.\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003ePreis pro Einheit:\u003c\/strong\u003e Preis pro Stück\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAbmessungen:\u003c\/strong\u003e 160mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTyp:\u003c\/strong\u003e Nadel\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eForm:\u003c\/strong\u003e Oval\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchweizer Schliff:\u003c\/strong\u003e #2\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMaße der Schneidefläche:\u003c\/strong\u003e 3\"L (76,2 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMarke:\u003c\/strong\u003e Glardon Vallorbe\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVersandgewicht:\u003c\/strong\u003e 0,457 Unzen (12,96 g)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHerkunftsland:\u003c\/strong\u003e Schweiz\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGewicht:\u003c\/strong\u003e 0,013 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50678291562842,"sku":"114993","price":12.22,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114993.jpg?v=1762884510"},{"product_id":"glardon-vallorbe®-round-edge-pillar-needle-file-cut-2","title":"Glardon Vallorbe® Round-Edge Pillar Needle File, Cut #2","description":"\u003cp\u003eThis Glardon Vallorbe® rounded pillar needle file is thicker (relative to its width) than other flat file shapes and is ideal for narrow, squared-off spaces, slots with rounded ends and interior curves. The file has double-cut teeth on the flat sides and single-cut teeth on the rounded edges; the file tapers slightly toward the tip. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other; single-cut (cross-cut) files feature evenly spaced rows of teeth that all cut in the same direction, from the end or point of the file toward the tang or handle of the file (the forward stroke). Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":52648279376218,"sku":"114053","price":11.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114053.jpg?v=1762660556"},{"product_id":"glardon-vallorbe®-valtitan®-three-square-needle-file","title":"Glardon Vallorbe® Valtitan® Three-Square Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® Valtitan® three-square (triangle) needle file is ideal for filing corners, edges, sharp angles, creases or folds, and for shaping the prongs on marquise- or pear-cut settings. It is highly recommended for working with platinum and other hard metals. The file has three flat sides of equal width that taper to a fine point, and the edges are rounded to protect adjacent structures as you file.\n\nValtitan® files deliver better performance on hard-to-file surfaces (such as platinum and titanium), have great corrosion resistance and long service life. Valtitan files are specially treated for hardness (72 HRC, the hardest steel file available). The teeth on these files resist metal accumulation so that a quick, sharp knock is usually enough to clear them.\n\nThis file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#0","offer_id":52648281669978,"sku":"114960","price":20.36,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52648281702746,"sku":"114947","price":20.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114960.jpg?v=1762314558"},{"product_id":"friedrich-dick-barrette-needle-file","title":"Friedrich Dick Barrette Needle File","description":"\u003cp\u003eThis Friedrich Dick barrette needle file is ideal for refining flat surfaces as well as narrow areas, straight edges and structures, and outside curves. It has a broad-based triangle shape that tapers in width and thickness, and has teeth only on the bottom surface; the file is double-cut. The safe back prevents removal of metal from adjacent surfaces. This file has a German cut #2; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652269666650,"sku":"114755","price":11.19,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652269699418,"sku":"114756","price":11.19,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652269732186,"sku":"114757","price":11.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114757.jpg?v=1763118946"},{"product_id":"friedrich-dick-needle-file-sets-set-of-12","title":"Friedrich Dick Needle File Sets, Set of 12","description":"\u003cp\u003eThis set of Friedrich Dick needle files includes an assortment of 12 commonly used file shapes and ensures you have the file shape you need for all of your jewelry designs. A covered stand holds the double-cut files upright on your bench and helps protect them from humidity and acid fumes. This set of needle files includes one of each file shape: warding, equalling, round-edge pillar, crochet, round, half-round, barrette, crossing, slitting, knife, three-square and square.\n\nThese files have a German cut #3; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nAmong the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652280086874,"sku":"114764","price":117.21,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652280119642,"sku":"114765","price":117.57,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652280152410,"sku":"114766","price":117.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114764.jpg?v=1762344208"},{"product_id":"glardon-vallorbe®-needle-buffing-files-g10-set-of-6","title":"Glardon Vallorbe® Needle Buffing Files, G10, Set of 6","description":"\u003cp\u003ePre-polish and precisely finish the intricate details of your most delicate pieces. This set of G10 needle buffing files from Glardon Vallorbe® has a composite coating of synthetic diamond particles and is ideal for smoothing tiny details and accessing hard-to-reach areas. The hard coating makes these buff files great for use on a variety of materials—including all precious metals, titanium, steel and even enamel—and delivers a long service life. This set includes six commonly used file shapes in a plastic carrying case to help keep your bench organized.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":52652288967002,"sku":"114037","price":175.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114037.jpg?v=1762344267"},{"product_id":"needle-file-set-set-of-12","title":"Needle File Set, Set of 12","description":"\u003cp\u003eThis 12-piece set of needle files is an economical option for beginners and for those interested in trying a variety of file shapes before investing in higher-quality files. This set ensures you have the file shape you need for all of your jewelry designs. This assortment contains two files each of: warding, equalling and round; one file each of half-round, barrette, crossing, knife and three-square. Shapes included in the assortment may vary. These files have a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652294013274,"sku":"114258","price":14.19,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652294046042,"sku":"114257","price":14.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114258.jpg?v=1762344306"},{"product_id":"friedrich-dick-half-round-needle-file","title":"Friedrich Dick Half-Round Needle File","description":"\u003cp\u003eThis Friedrich Dick half-round needle file is ideal for refining both flat and curved surfaces. It has one flat and one rounded side with teeth on both; the file width tapers to a point. The tapering width and the fine point allow it to access crevices and small openings and details, corners and the inside of ring shanks and bezels. This file has a German cut #2; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652324815194,"sku":"114746","price":12.25,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652324847962,"sku":"114747","price":12.06,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652324880730,"sku":"114748","price":12.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114747.jpg?v=1762344390"},{"product_id":"friedrich-dick-crossing-needle-file-cut-5","title":"Friedrich Dick Crossing Needle File, Cut #5","description":"\u003cp\u003eThis Friedrich Dick crossing needle file features a double half-round shape—each with a different radius—and is an ideal choice for filling inside ring shanks and other curved interior surfaces. The double-cut file tapers to a point in width and thickness along its length. Along the edges, the curved sides meet at a sharp angle.\n\nThis file has a German cut #5; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nAmong the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"Default Title","offer_id":52652334186842,"sku":"114754","price":13.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114754.jpg?v=1762344444"},{"product_id":"friedrich-dick-needle-file-set-set-of-6","title":"Friedrich Dick Needle File Set, Set of 6","description":"\u003cp\u003eThis set of Friedrich Dick needle files includes an assortment of the six most commonly used file shapes and ensures you have the file shape you need for all of your jewelry designs. This set of double-cut needle files includes one of each file shape: equalling, round, half-round, barrette, three-square, and square. These files have a German cut #2; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652343525722,"sku":"11479301","price":72.69,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652343558490,"sku":"11479401","price":72.71,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652343591258,"sku":"11479601","price":72.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11479301.jpg?v=1762344496"},{"product_id":"glardon-vallorbe®-equalling-needle-file","title":"Glardon Vallorbe® Equalling Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® equalling needle file is ideal for shaping slots and corners, for smoothing and refining flat surfaces and for shaping openings. The file is flat with parallel sides and edges; this double-cut file has teeth on all four surfaces.\n\nThis file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652360368474,"sku":"114325","price":12.18,"currency_code":"EUR","in_stock":true},{"title":"#00","offer_id":52652360401242,"sku":"114324","price":12.18,"currency_code":"EUR","in_stock":true},{"title":"#1","offer_id":52652360434010,"sku":"114326","price":13.08,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652360466778,"sku":"114327","price":12.18,"currency_code":"EUR","in_stock":true},{"title":"#4","offer_id":52652360499546,"sku":"114328","price":14.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114325in.jpg?v=1762884373"},{"product_id":"glardon-vallorbe®-three-square-needle-file","title":"Glardon Vallorbe® Three-Square Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® three-square (triangle) needle file is ideal for filing corners, edges, sharp angles and creases or folds; it is also useful for shaping the prongs on marquise- or pear-cut settings. The file has three flat sides of equal width that taper to a fine point, and the edges are rounded to protect adjacent structures as you file.\n\nThis file has a Swiss cut #00; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652377112922,"sku":"114340","price":14.26,"currency_code":"EUR","in_stock":false},{"title":"#00","offer_id":52652377145690,"sku":"114339","price":13.61,"currency_code":"EUR","in_stock":true},{"title":"#1","offer_id":52652377178458,"sku":"114341","price":13.61,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652377211226,"sku":"114342","price":13.6,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652377243994,"sku":"114343","price":15.68,"currency_code":"EUR","in_stock":true},{"title":"#4","offer_id":52652377276762,"sku":"114344","price":15.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114339in.jpg?v=1763070573"},{"product_id":"friedrich-dick-equalling-needle-file","title":"Friedrich Dick Equalling Needle File","description":"\u003cp\u003eThis Friedrich Dick equalling needle file is ideal for shaping slots and corners, for smoothing and refining flat surfaces and for shaping openings. Flat with parallel sides and edges, the double-cut file has teeth on top and bottom surfaces and both edges. This file is also available in a set of six or 12 (available separately). This file has a German cut #2; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652398379354,"sku":"114749","price":10.04,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652398412122,"sku":"114750","price":10.04,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652398444890,"sku":"114751","price":10.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114749.jpg?v=1763118668"},{"product_id":"glardon-vallorbe®-valtitan®-half-round-needle-file","title":"Glardon Vallorbe® Valtitan® Half-Round Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® Valtitan® half-round needle file is ideal for refining both flat and curved surfaces; it is highly recommended for working with platinum and other hard metals. It has one flat and one rounded side with teeth on both; the file width tapers to a point. The tapering width and the fine point allow it to access crevices and small openings and details, corners and the inside of ring shanks and bezels.\n\nThis file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nValtitan® files deliver better performance on hard-to-file surfaces (such as platinum and titanium), have great corrosion resistance and long service life. Valtitan files are specially treated for hardness (72 HRC, the hardest steel file available). The teeth on these files resist metal accumulation so that a quick, sharp knock is usually enough to clear them.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#0","offer_id":52652404310362,"sku":"114945","price":24.59,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652404343130,"sku":"114946","price":24.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114945.jpg?v=1762344905"},{"product_id":"glardon-vallorbe®-valtitan™-needle-file-sets-set-of-6","title":"Glardon Vallorbe® Valtitan™ Needle File Sets, Set of 6","description":"\u003cp\u003eThis set of Glardon Vallorbe® Valtitan® needle files includes six commonly used file shapes and is highly recommended for working with platinum and other hard metals. This set of double-cut needle files ensures you have the file shape you need for all of your jewelry designs. This file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. Valtitan® files deliver better performance on hard-to-file surfaces (such as platinum and titanium), have great corrosion resistance and long service life. Valtitan files are specially treated for hardness (72 HRC, the hardest steel file available). The teeth on these files resist metal accumulation so that a quick, sharp knock is usually enough to clear them. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#0","offer_id":52652409422170,"sku":"114952","price":117.34,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652409454938,"sku":"114953","price":117.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114952.jpg?v=1762344959"},{"product_id":"glardon-vallorbe®-half-round-needle-file","title":"Glardon Vallorbe® Half-Round Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® half-round needle file is ideal for refining both flat and curved surfaces. It has one flat and one rounded side with teeth on both; the file width tapers to a point. The tapering width and the fine point allow it to access crevices and small openings and details, corners and the inside of ring shanks and bezels. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#1","offer_id":52652421480794,"sku":"114174","price":13.56,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652421513562,"sku":"114975","price":13.77,"currency_code":"EUR","in_stock":true},{"title":"#4","offer_id":52652421546330,"sku":"114976","price":13.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114174.jpg?v=1763070762"},{"product_id":"friedrich-dick-needle-file-set-set-of-5","title":"Friedrich Dick Needle File Set, Set of 5","description":"\u003cp\u003eThis set of Friedrich Dick needle files includes an assortment of the five most commonly used file shapes and ensures you have the file shape you need for all of your jewelry designs. This set of double-cut needle files includes one of each file shape: equalling, round, half-round, barrette, and three-square. These files have a German cut #3; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#3","offer_id":52652430524762,"sku":"11477401","price":69.38,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652430557530,"sku":"11477601","price":72.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11477401.jpg?v=1762345093"},{"product_id":"friedrich-dick-round-needle-file","title":"Friedrich Dick Round Needle File","description":"\u003cp\u003eThis Friedrich Dick round (rat-tail) needle file is ideal for enlarging, defining and smoothing holes, openings and small-radius curves, and for smoothing and refining tubing or fine round or concave structures. The file tapers to a fine point and has teeth around its entire surface. This file has a German cut #2; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652438585690,"sku":"114737","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652438618458,"sku":"114738","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652438651226,"sku":"114739","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114737.jpg?v=1762345148"},{"product_id":"glardon-vallorbe®-knife-needle-file","title":"Glardon Vallorbe® Knife Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® knife needle file is ideal for accessing narrow openings, angled joints and small features such as prongs. It has flat sides and edges with one edge thicker than the other so that the sides angle inward. With teeth on both sides and on the narrow edge, this double-cut file tapers to a fine point. The smooth wider edge helps protect set stones and adjacent structures against incidental contact with cutting surfaces.\n\nThis file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652452086106,"sku":"114337","price":15.73,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652452118874,"sku":"114338","price":15.73,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114337.jpg?v=1762345229"},{"product_id":"glardon-vallorbe®-barrette-needle-file","title":"Glardon Vallorbe® Barrette Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® barrette needle file is ideal for refining flat surfaces as well as narrow areas, straight edges and structures, and outside curves. It has a broad-based triangle shape that tapers in width and thickness, and has teeth only on the bottom surface; the file is double-cut. The safe back prevents removal of metal from adjacent surfaces.\n\nThis file has a Swiss cut #1; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652463620442,"sku":"114352","price":13.6,"currency_code":"EUR","in_stock":true},{"title":"#00","offer_id":52652463653210,"sku":"114351","price":13.6,"currency_code":"EUR","in_stock":true},{"title":"#1","offer_id":52652463685978,"sku":"114353","price":13.62,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652463718746,"sku":"114354","price":13.6,"currency_code":"EUR","in_stock":true},{"title":"#4","offer_id":52652463751514,"sku":"114356","price":16.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114351in.jpg?v=1763070644"},{"product_id":"glardon-vallorbe®-round-needle-file","title":"Glardon Vallorbe® Round Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® round (rat-tail) needle file is ideal for enlarging, defining and smoothing holes, openings and small-radius curves, and for smoothing and refining tubing or fine round or concave structures. The file tapers to a fine point and has teeth around its entire surface.\n\nThis file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652481085786,"sku":"114348","price":12.15,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652481118554,"sku":"114349","price":12.15,"currency_code":"EUR","in_stock":true},{"title":"#4","offer_id":52652481151322,"sku":"114350","price":13.11,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114350.jpg?v=1762618932"},{"product_id":"friedrich-dick-safe-edge-barrette-needle-file","title":"Friedrich Dick Safe-Edge Barrette Needle File","description":"\u003cp\u003eThis Friedrich Dick barrette needle file is ideal for refining flat surfaces as well as narrow areas, straight edges and structures, and outside curves. It has a broad-based triangle shape that tapers in width and thickness, and has teeth only on the bottom surface; the file is double-cut. Similar to barrette hand files, the triangular top of this file is ground smooth, leaving a flat, smooth upper surface with polished safety edges. The safe back and rounded edges of the file prevent removal of metal from adjacent surfaces and won't mar or damage delicate features such as prongs and undercuts. This file has a German cut #3; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652488065370,"sku":"1147551","price":20.49,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652488098138,"sku":"1147561","price":20.49,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652488130906,"sku":"1147571","price":21.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/1147551in1.jpg?v=1762345498"},{"product_id":"glardon-vallorbe®-half-round-needle-file-1","title":"Glardon Vallorbe® Half-Round Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® half-round needle file is ideal for refining both flat and curved surfaces. It has one flat and one rounded side with teeth on both; the file width tapers to a point. The tapering width and the fine point allow it to access crevices and small openings and details, corners and the inside of ring shanks and bezels.\n\nThis file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652495143258,"sku":"114330","price":16.4,"currency_code":"EUR","in_stock":false},{"title":"#00","offer_id":52652495176026,"sku":"114329","price":16.4,"currency_code":"EUR","in_stock":true},{"title":"#1","offer_id":52652495208794,"sku":"114331","price":16.4,"currency_code":"EUR","in_stock":false},{"title":"#2","offer_id":52652495241562,"sku":"114332","price":18.28,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652495274330,"sku":"114333","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"#4","offer_id":52652495307098,"sku":"114334","price":19.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114332in.jpg?v=1763042945"},{"product_id":"glardon-vallorbe®-crossing-needle-file","title":"Glardon Vallorbe® Crossing Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® crossing needle file features a double half-round shape—each with a different radius—and is an ideal choice for filling inside ring shanks and other curved interior surfaces. The double-cut file tapers to a point in width and thickness along its length. Along the edges, the curved sides meet at a sharp angle.\n\nThis file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652506120538,"sku":"114335","price":19.59,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652506153306,"sku":"114336","price":19.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114335.jpg?v=1762345711"},{"product_id":"glardon-vallorbe®-valtitan®-equalling-needle-file","title":"Glardon Vallorbe® Valtitan® Equalling Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® Valtitan® equalling needle file is ideal for shaping slots and corners, for smoothing and refining flat surfaces and for shaping openings; it is highly recommended for working with platinum and other hard metals. Flat with parallel sides and edges, the double-cut file has teeth on top and bottom surfaces and both edges.\n\nThis file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nValtitan® files deliver better performance on hard-to-file surfaces (such as platinum and titanium), have great corrosion resistance and long service life. Valtitan files are specially treated for hardness (72 HRC, the hardest steel file available). The teeth on these files resist metal accumulation so that a quick, sharp knock is usually enough to clear them.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#0","offer_id":52652513886554,"sku":"114959","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652513919322,"sku":"114944","price":19.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114944.jpg?v=1762345764"},{"product_id":"glardon-vallorbe®-square-needle-file","title":"Glardon Vallorbe® Square Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® square needle file is ideal for scoring lines when creating bends and for forming, smoothing or refining 90° angles. The file is uniform in width and thickness, tapers to a fine point, and has teeth on all four sides.\n\nThis file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652519948634,"sku":"114345","price":15.68,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652519981402,"sku":"114346","price":16.8,"currency_code":"EUR","in_stock":true},{"title":"#4","offer_id":52652520014170,"sku":"114347","price":18.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114345in.jpg?v=1763118750"},{"product_id":"friedrich-dick-square-needle-file","title":"Friedrich Dick Square Needle File","description":"\u003cp\u003eThis Friedrich Dick square needle file is ideal for scoring lines when creating bends and for forming, smoothing or refining 90° angles. The file is uniform in width and thickness, tapers to a fine point, and has teeth on all four sides. This file has a German cut #5; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652531646810,"sku":"114734","price":12.78,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652531679578,"sku":"114735","price":12.54,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652531712346,"sku":"114736","price":12.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114734.jpg?v=1762345898"},{"product_id":"glardon-vallorbe®-valtitan®-square-needle-file","title":"Glardon Vallorbe® Valtitan® Square Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® Valtitan® square needle file is ideal for scoring lines when creating bends and for forming, smoothing or refining 90° angles; it is highly recommended for working with platinum and other hard metals. The file is uniform in width and thickness, tapers to a fine point, and has teeth on all four sides. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Valtitan® files deliver better performance on hard-to-file surfaces (such as platinum and titanium), have great corrosion resistance and long service life. Valtitan files are specially treated for hardness (72 HRC, the hardest steel file available). The teeth on these files resist metal accumulation so that a quick, sharp knock is usually enough to clear them. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#0","offer_id":52652538954074,"sku":"114948","price":20.26,"currency_code":"EUR","in_stock":false},{"title":"#2","offer_id":52652538986842,"sku":"114949","price":20.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114948.jpg?v=1763118795"},{"product_id":"glardon-vallorbe®-valtitan®-barrette-needle-file","title":"Glardon Vallorbe® Valtitan® Barrette Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® Valtitan® barrette needle file is ideal for refining flat surfaces as well as narrow areas, straight edges and structures, and outside curves; it is highly recommended for working with platinum and other hard metals. It has a broad-based triangle shape that tapers in width and thickness, and has teeth only on the bottom surface; the file is double-cut. The safe back prevents removal of metal from adjacent surfaces.\n\nThis file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nValtitan® files deliver better performance on hard-to-file surfaces (such as platinum and titanium), have great corrosion resistance and long service life. Valtitan files are specially treated for hardness (72 HRC, the hardest steel file available). The teeth on these files resist metal accumulation so that a quick, sharp knock is usually enough to clear them.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#0","offer_id":52652553371994,"sku":"114942","price":20.85,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652553404762,"sku":"114943","price":19.55,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114943in.jpg?v=1763118972"},{"product_id":"glardon-vallorbe®-valtitan®-round-needle-file","title":"Glardon Vallorbe® Valtitan® Round Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® Valtitan® round (rat-tail) needle file is ideal for enlarging, defining and smoothing holes, openings and small-radius curves, and for smoothing and refining tubing or fine round or concave structures; it is highly recommended for working with platinum and other hard metals. The file tapers to a fine point and has teeth around its entire surface. This file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Valtitan® files deliver better performance on hard-to-file surfaces (such as platinum and titanium), have great corrosion resistance and long service life. Valtitan files are specially treated for hardness (72 HRC, the hardest steel file available). The teeth on these files resist metal accumulation so that a quick, sharp knock is usually enough to clear them. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#0","offer_id":52652564840794,"sku":"114950","price":18.18,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652564873562,"sku":"114951","price":19.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114951_281575.jpg?v=1763119047"},{"product_id":"glardon-vallorbe®-round-needle-file-cut-2","title":"Glardon Vallorbe® Round Needle File, Cut #2","description":"\u003cp\u003eThis Glardon Vallorbe® round (rat-tail) needle file is ideal for enlarging, defining and smoothing holes, openings and small-radius curves, and for smoothing and refining tubing or fine round or concave structures. The file tapers to a fine point and has teeth around its entire surface. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":52652678414682,"sku":"114996","price":9.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114996.jpg?v=1762346709"},{"product_id":"friedrich-dick-three-square-needle-file","title":"Friedrich Dick Three-Square Needle File","description":"\u003cp\u003eThis Friedrich Dick three-square (triangle) needle file is ideal for filing corners, edges, sharp angles and creases or folds; it is also useful for shaping the prongs on marquise- or pear-cut settings. The file has three flat sides of equal width that taper to a fine point, and the edges are rounded to protect adjacent structures as you file. This file has a German cut #3; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652702204250,"sku":"114731","price":11.41,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652702237018,"sku":"114732","price":11.4,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652702269786,"sku":"114733","price":11.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114733.jpg?v=1762346852"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/collections\/Needle_Files.jpg?v=1762516604","url":"https:\/\/www.amadesa.com\/de-de\/collections\/needle-files.oembed","provider":"Amadesa","version":"1.0","type":"link"}