{"title":"Stamp \u0026 Marking Tools","description":"\u003cp\u003eLeave a lasting impression with our \u003cstrong data-start=\"113\" data-end=\"138\"\u003eStamp \u0026amp; Marking Tools\u003c\/strong\u003e collection. Whether you need \u003cstrong data-start=\"168\" data-end=\"194\"\u003equality marking stamps\u003c\/strong\u003e for authenticity, \u003cstrong data-start=\"213\" data-end=\"243\"\u003ealphabet and number stamps\u003c\/strong\u003e for personalization, or \u003cstrong data-start=\"268\" data-end=\"285\"\u003edesign stamps\u003c\/strong\u003e for unique patterns, we have the right tools for precision marking. Enhance your craftsmanship with \u003cstrong data-start=\"386\" data-end=\"404\"\u003emarking pliers\u003c\/strong\u003e for controlled and consistent imprints on metal surfaces.\u003c\/p\u003e","products":[{"product_id":"10k-stamp-for-nickel-plated-marking-pliers-0-79mm-character","title":"10K Stamp for Nickel-Plated Marking Pliers, . Character","description":"\u003cp\u003eEasily and clearly quality-mark your 10-karat gold jewelry pieces with this domed 10K stamp. This stamp fits into your marking pliers (available separately) and marks your jewelry pieces with a simple squeeze. It is ideal for marking curved surfaces, such as the inside of a ring or cuff bracelet. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life.\n\nMarking stamps are ideal for quality-marking your jewelry designs; customers appreciate having their jewelry stamped as a reminder—and promise—of its quality. Custom stamps are available by special order.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50633723183450,"sku":"111222","price":19.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/111222.jpg?v=1763761930"},{"product_id":"stamp-set-alphabet-straight-shank-1-5mm-characters","title":"Stamp Set, Alphabet, Straight Shank, 1.5mm Characters","description":"The stamps in this alphabet set have straight shanks and are made from high-carbon steel with a hardness of 58 HCR to deliver a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. This set includes 26 uppercase letters and a “.” (a dot).\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrice Per Unit:\u003c\/strong\u003e Priced per Each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 57.15 x 6.35mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1.5mm (1\/16\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 29.857 ounces (846.433g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry Of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.846 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50633744548186,"sku":"112379","price":121.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112379.jpg?v=1741111521"},{"product_id":"impressart®-design-stamp-set-geometric-mandala-signature","title":"ImpressArt® Design Stamp Set, Geometric Mandala Signature","description":"\u003cp\u003eQuickly add decorative designs to your jewelry with this ImpressArt® stamp set. These stamps have straight shanks and are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. Each stamp is labeled on its side for easy identification and orientation. This set includes five mandala design stamps (two 4mm, two 6mm and one 9.5mm). ImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items. For best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50633767354714,"sku":"114231","price":33.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114231_387d18dd-46e7-4b0d-8f1d-19b2805b763f.jpg?v=1741466104"},{"product_id":"impressart®-design-stamp-set-triple-hearts-1-5-3mm-character","title":"ImpressArt® Design Stamp Set, Triple Hearts, 1.5– Character","description":"\u003cp\u003eQuickly add decorative details to your jewelry with this ImpressArt® design stamp set. The stamps have a straight shank and are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. Each stamp is labeled on its side for easy identification and orientation. This ImpressArt stamp set includes three stamps with a triple heart design in graduated character heights (1.5, 2 and 3mm).\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50633768206682,"sku":"114480","price":24.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114480.jpg?v=1741466574"},{"product_id":"impressart®-heart-design-stamp-6mm-character","title":"ImpressArt® Heart Design Stamp, Character","description":"\u003cp\u003eQuickly add decorative details to your jewelry with this ImpressArt® design stamp. The stamp has a straight shank and is perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. This stamp is labeled on its side for easy identification and orientation.\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50633768272218,"sku":"114483","price":11.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114483.jpg?v=1741466577"},{"product_id":"impressart®-diamond-design-stamp-6mm-character","title":"ImpressArt® Diamond Design Stamp, Character","description":"\u003cp\u003eQuickly add decorative details to your jewelry with this ImpressArt® design stamp. The stamp has a straight shank and is perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. This stamp is labeled on its side for easy identification and orientation.\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50633768632666,"sku":"114590","price":11.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114590.jpg?v=1741466620"},{"product_id":"impressart®-songbird-design-stamp-6mm-character","title":"ImpressArt® Songbird Design Stamp, Character","description":"\u003cp\u003eQuickly add decorative details to your jewelry with this ImpressArt® design stamp. The stamp has a straight shank and is perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. This stamp is labeled on its side for easy identification and orientation.\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50633768960346,"sku":"114641","price":11.02,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114641.jpg?v=1741466654"},{"product_id":"impressart®-black-design-stamp-enamel-marker","title":"ImpressArt® Black Design Stamp Enamel Marker","description":"\u003cp\u003eMake your stamped impressions stand out by darkening them with this black acrylic ink ImpressArt® marker. Apply the enamel inside the impression with the easy-to-use applicator marker; make sure the entire impression is coated with the enamel by running the tip of the marker over the impression left-to-right. Allow the enamel to dry for 1–3 minutes, then wipe away excess ink with a soft cloth. After the enamel is dry, a toothpick may be used to gently remove any unwanted enamel from around the edges of the impression. Larger impressions need more time to dry before removing excess.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50633770336602,"sku":"114870","price":11.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114870in1.jpg?v=1762868416"},{"product_id":"impressart®-design-stamp-set-dots-dashes-0-5-3mm-characters","title":"ImpressArt® Design Stamp Set, Dots \u0026 Dashes, 0.5– Characters","description":"\u003cp\u003eQuickly add decorative details to your jewelry with this ImpressArt® design stamp set. The stamps have a straight shank and are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. Each stamp is labeled on its side for easy identification and orientation. This ImpressArt® stamp set includes four stamps that can be used individually or together to create dots and dashes for punctuation, morse code or other design needs.\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50633770402138,"sku":"114880","price":32.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114880in2.jpg?v=1762880724"},{"product_id":"impressart®-design-stamp-set-mandala-series-1-3-6mm-characters","title":"ImpressArt® Design Stamp Set, Mandala Series 1, 3– Characters","description":"\u003cp\u003eQuickly add decorative details to your jewelry with this ImpressArt® design stamp set. The stamps have a straight shank and are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. Each stamp is labeled on its side for easy identification and orientation. This ImpressArt® stamp set includes four stamps that can be used individually or together to create mandala and other designs.\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50633770762586,"sku":"114881","price":32.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114881in3.jpg?v=1762874489"},{"product_id":"impressart®-design-stamp-set-texture-series-3-6mm-character","title":"ImpressArt® Design Stamp Set, Texture Series 3, Character","description":"\u003cp\u003eQuickly add decorative details to your jewelry with this ImpressArt® design stamp set. The stamps have a straight shank and are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. Each stamp is labeled on its side for easy identification and orientation. This ImpressArt® stamp set includes four stamps that can be used individually or together to create texture patterns and other designs.\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50633770860890,"sku":"114890","price":33.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114890_875840.jpg?v=1762890751"},{"product_id":"impressart®-design-stamp-set-uppercase-ember-alphabet-2-5mm-characters","title":"ImpressArt® Design Stamp Set, Uppercase Ember Alphabet, Characters","description":"\u003cp\u003eQuickly add decorative lettering or custom phrases to your jewelry designs with this ImpressArt® alphabet design stamp set. These stamps have straight shanks and are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. Each stamp is labeled on its side for easy identification and orientation. This set includes the complete alphabet (A–Z) plus seven additional shapes and comes in a slotted case (6-3\/4\"W x 2-1\/2\"D x 3-1\/4\"H) with clear lid for easy, organized storage. ImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items. For best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50633771024730,"sku":"114903","price":104.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114903in3_224268.jpg?v=1762874741"},{"product_id":"impressart®-design-stamp-set-lowercase-stargazer-alphabet-2mm-characters","title":"ImpressArt® Design Stamp Set, Lowercase Stargazer Alphabet, Characters","description":"\u003cp\u003eQuickly add decorative lettering or custom phrases to your jewelry designs with this ImpressArt® alphabet design stamp set. These stamps have straight shanks and are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. Each stamp is labeled on its side for easy identification and orientation. This set includes the complete alphabet (A–Z) plus seven additional shapes and punctuation marks and comes in a slotted case (6-3\/4\"W x 2-1\/2\"D x 3-1\/4\"H) with clear lid for easy, organized storage. ImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items. For best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50633771155802,"sku":"114919","price":93.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114919in2.jpg?v=1741467786"},{"product_id":"impressart®-design-stamp-set-lowercase-amethyst-alphabet-3mm-characters","title":"ImpressArt® Design Stamp Set, Lowercase Amethyst Alphabet, Characters","description":"\u003cp\u003eQuickly add decorative lettering or custom phrases to your jewelry designs with this ImpressArt® alphabet design stamp set. These stamps have straight shanks and are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. Each stamp is labeled on its side for easy identification and orientation. This set includes the complete alphabet (A–Z) plus seven additional shapes and punctuation marks and comes in a slotted case (6-3\/4\"W x 2-1\/2\"D x 3-1\/4\"H) with clear lid for easy, organized storage. ImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items. For best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50633771385178,"sku":"114966","price":104.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114966_98b5b5bb-d066-4190-803c-f7033512e4f8.jpg?v=1741468143"},{"product_id":"18k-stamp-for-nickel-plated-marking-pliers-0-79mm-character","title":"18K Stamp for Nickel-Plated Marking Pliers, . Character","description":"\u003cp\u003eEasily and clearly quality-mark your 18-karat gold jewelry pieces with this domed 18K stamp. This stamp fits into your marking pliers (available separately) and marks your jewelry pieces with a simple squeeze. It is ideal for marking curved surfaces, such as the inside of a ring or cuff bracelet. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life.\n\nMarking stamps are ideal for quality-marking your jewelry designs; customers appreciate having their jewelry stamped as a reminder—and promise—of its quality. Custom stamps are available by special order.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50671519629658,"sku":"111224","price":19.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/111224in1.jpg?v=1763761836"},{"product_id":"sterling-stamp-for-nickel-plated-marking-pliers-domed-0-79mm-character","title":"Sterling Stamp for Nickel-Plated Marking Pliers, Domed, . Character","description":"\u003cp\u003eEasily and clearly quality-mark your sterling silver jewelry pieces with this domed sterling stamp. This stamp fits into your marking pliers (available separately) and marks your jewelry pieces with a simple squeeze. It is ideal for marking curved surfaces, such as the inside of a ring or cuff bracelet. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life.\n\nMarking stamps are ideal for quality-marking your jewelry designs; customers appreciate having their jewelry stamped as a reminder—and promise—of its quality. Custom stamps are available by special order.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50671521759578,"sku":"111226","price":38.96,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/111226in1.jpg?v=1763670572"},{"product_id":"stamp-set-numbers-and-alphabet-3-2mm-characters","title":"Stamp Set, Numbers and Alphabet, Characters","description":"\u003cp\u003eEach stamp in this alphabet and numbers set has a straight shank and a flat tip face that's perpendicular to the tool shank, marking it ideal for flat surfaces such as quality or brand tags, discs, stampings and other components. The stamps are made from tempered steel to deliver years of service. This set includes 36 stamps: 26 letters, nine numerals and an \"\u0026amp;\" symbol. Design stamps are ideal for adding decorative detailing or lettering to your jewelry designs. Customize with date, monograms and more to make jewelry even more personal for your customers.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50671716335962,"sku":"111345","price":30.92,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/111345.jpg?v=1762859724"},{"product_id":"thumbsaver-stamp-holder","title":"Thumbsaver Stamp Holder","description":"\u003cp\u003eThis handy tool securely holds round (up to 7mm diameter) and square stamps (up to 7\/32\"W), including your homemade stamps, while keeping fingers at a safe distance from the hammer strike. Simply insert the stamp into the round hole and tighten by turning the knurled handle—it's that easy. It also makes lining up the stamp a snap because there's nothing to obscure your view of the stamping surface.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50671736455514,"sku":"111369","price":23.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/111369in.jpg?v=1762864677"},{"product_id":"marking-stamp-set-bent-shank-1mm-characters","title":"Marking Stamp Set, Bent Shank, Characters","description":"\u003cp\u003eEach stamp in this marking stamp set are clearly labeled, making it easy for you to find the stamp you want. The bent notch near the tip on bent stamps make them ideal for stamping curved surfaces such as the inside of a ring or bangle. This set offers seven different stamps reading \"10K\", \"14K\", \"18K\", \"750\", \"Plat\", \"925\" and \"STER\", and is delivered in a wood organizer case with a magnetic closure.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50671992373594,"sku":"111700","price":114.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/111700in1.jpg?v=1762874184"},{"product_id":"marking-stamp-935-straight-shank-1mm-character","title":"Marking Stamp, \"935,\" Straight Shank, Character","description":"\u003cp\u003eThis straight marking stamp reads \"935\"; ideal for quality-marking designs made with Argentium® 935 Silver. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672893067610,"sku":"112098","price":29.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112098in1.jpg?v=1762874315"},{"product_id":"marking-stamp-sterling-script-straight-shank-1mm","title":"Marking Stamp, \"Sterling\" (Script), Straight Shank","description":"\u003cp\u003eThis marking stamp reads \"Sterling\" in script font; ideal for quality-marking your designs. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672911548762,"sku":"11212905","price":28.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11212905in.jpg?v=1762416520"},{"product_id":"marking-stamp-925-bent-shank-1mm","title":"Marking Stamp, \"925,\" Bent Shank","description":"\u003cp\u003eThis bent marking stamp reads \"925\"; ideal for quality-marking your designs. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a bent shank have a notch near the tip that makes them ideal for stamping curved surfaces such as the inside of a ring or bangle; the slightly domed striking surface ensure a crisp, clean mark.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672914825562,"sku":"11213001","price":31.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213001in.jpg?v=1762415297"},{"product_id":"marking-stamp-925-straight-shank-1mm","title":"Marking Stamp, \"925,\" Straight Shank","description":"\u003cp\u003eThis straight marking stamp reads \"925\"; ideal for quality-marking your designs. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672915022170,"sku":"11213002","price":30.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213002in.jpg?v=1762857626"},{"product_id":"marking-stamp-999fs-straight-shank-1mm","title":"Marking Stamp, \"999FS,\" Straight Shank","description":"\u003cp\u003eThis straight marking stamp reads \"999FS\"; ideal for quality-marking your designs. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672915939674,"sku":"11213004","price":30.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213004in.jpg?v=1762416545"},{"product_id":"marking-stamp-usa-straight-shank-1mm","title":"Marking Stamp, \"USA,\" Straight Shank","description":"\u003cp\u003eThis straight marking stamp reads \"USA\"; ideal for quality-marking your designs. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672918593882,"sku":"11213102","price":30.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213102.jpg?v=1762874346"},{"product_id":"marking-stamp-platinum-bent-shank-1mm","title":"Marking Stamp, \"Platinum,\" Bent Shank","description":"\u003cp\u003eThis bent marking stamp reads \"Platinum\"; ideal for quality-marking your designs. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a bent shank have a notch near the tip that makes them ideal for stamping curved surfaces such as the inside of a ring or bangle; the slightly domed striking surface ensure a crisp, clean mark.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672920002906,"sku":"11213401","price":31.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213401in.jpg?v=1762620032"},{"product_id":"marking-stamp-platinum-straight-shank-1mm","title":"Marking Stamp, \"Platinum,\" Straight Shank","description":"\u003cp\u003eThis straight marking stamp reads \"Platinum\"; ideal for quality-marking your designs. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50672921182554,"sku":"11213402","price":30.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11213402.jpg?v=1762424499"},{"product_id":"tool-steel-copyright-stamp-straight-shank-3-2mm-character","title":"Tool Steel Copyright Stamp, Straight Shank, Character","description":"\u003cp\u003eSafeguard your designs with this copyright straight stamp. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50674379456858,"sku":"112144","price":30.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112144.jpg?v=1741387033"},{"product_id":"tool-steel-copyright-stamp-straight-shank-1-6mm-character","title":"Tool Steel Copyright Stamp, Straight Shank, Character","description":"\u003cp\u003eSafeguard your designs with this copyright straight stamp. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50674380112218,"sku":"112145","price":30.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112145_60ebbb82-1b52-4e9f-b6ad-499e99cb44b7.jpg?v=1741387043"},{"product_id":"tool-steel-copyright-stamp-bent-shank-1-6mm-character","title":"Tool Steel Copyright Stamp, Bent Shank, Character","description":"\u003cp\u003eSafeguard your designs with this copyright bent stamp. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a bent shank have a notch near the tip that makes them ideal for stamping curved surfaces such as the inside of a ring or bangle; the slightly domed striking surface ensure a crisp, clean mark.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50674380439898,"sku":"112146","price":31.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112146in.jpg?v=1762890252"},{"product_id":"marking-stamp-950-pd-straight-shank-1mm-character","title":"Marking Stamp \"950 Pd\", Straight Shank, Character","description":"\u003cp\u003eThis straight marking stamp reads \"950 Pd\"; ideal for quality-marking designs made with .950-pure palladium. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50674382012762,"sku":"112148","price":29.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112148.jpg?v=1741387072"},{"product_id":"marking-stamp-950plat-straight-shank-1mm-character","title":"Marking Stamp, \"950Plat,\" Straight Shank, Character","description":"\u003cp\u003eThis marking stamp reads \"950Plat\"; ideal for quality-marking designs made with .950-pure platinum. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50674487624026,"sku":"112896","price":29.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112896_67eb2575-20d8-4802-8286-65c7aaf6c6a1.jpg?v=1741459863"},{"product_id":"marking-stamp-950-pd-bent-shank-1mm-character","title":"Marking Stamp \"950 Pd\", Bent Shank, Character","description":"\u003cp\u003eThis straight marking stamp reads \"950 Pd\"; ideal for quality-marking designs made with .950-pure palladium. The stamp is precision-engraved from 5\/16\" tool steel oil-hardened to 58\/62 HRC, delivering crisp, detailed surfaces and a long service life. Stamps with a bent shank have a notch near the tip that makes them ideal for stamping curved surfaces such as the inside of a ring or bangle; the slightly domed striking surface ensure a crisp, clean mark.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50674611323226,"sku":"112149","price":31.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112149in.jpg?v=1762890270"},{"product_id":"stamp-set-numbers-0-9-straight-shank-1-6mm-characters","title":"Stamp Set, Numbers 0-9, Straight Shank, 1.6mm Characters","description":"The stamps in this number set have straight shanks and are made from high-carbon steel with a hardness of 58 HCR to deliver a long service life. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. These stamps are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. This set of stamps come in a handy storage box; reverse the number \"6\" to produce a \"9\" as needed.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or base metal ring blanks are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrice Per Unit:\u003c\/strong\u003e Priced per Each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 57.15 x 6.35mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1.6mm (1\/16\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 10.112 ounces (286.68g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry Of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.287 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50675221332314,"sku":"112377","price":48.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/112377_7bab0c7e-b516-494b-a164-a1b1c1cf92aa.jpg?v=1741416387"},{"product_id":"impressart®-jewelers-fauna-design-stamp-6mm-character","title":"ImpressArt® Jeweler's Fauna Design Stamp, Character","description":"\u003cp\u003eQuickly add decorative lettering or custom phrases to your jewelry designs with this ImpressArt® design stamp set. These stamps have straight shanks and are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. Each stamp is labeled on its side for easy identification and orientation. This set includes five punctuation and four design stamps comes in a storage case with labeled slots for each stamp. ImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items. For best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50678216655194,"sku":"114229","price":52.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114229in3_333762.jpg?v=1762880668"},{"product_id":"impressart®-design-stamp-set-southwestern-mandala-signature","title":"ImpressArt® Design Stamp Set, Southwestern Mandala Signature","description":"\u003cp\u003eQuickly add decorative designs to your jewelry with this ImpressArt® stamp set. These stamps have straight shanks and are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. Each stamp is labeled on its side for easy identification and orientation. This set includes four mandala design stamps (one 3mm, one 4mm and two 6mm). ImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items. For best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50678218424666,"sku":"114234","price":32.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114234_89c71242-d66c-4d84-a2dc-d5157d8ff876.jpg?v=1741587529"},{"product_id":"impressart®-straight-bracelet-stamp-jig","title":"ImpressArt® Straight Bracelet Stamp Jig","description":"\u003cp\u003eEasily create straight stamped bracelet designs on your blanks with this stamp jig from ImpressArt®. It works with 1\/4\" and 3\/8\" blanks, and can be used with 3mm and 6mm stamps magnetic jigs. The jig is great for use with steel stamping blocks that are 4” x 2” or larger. Simply slide your blank into the corresponding slot and use the guide marks to evenly space the stamps.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50678229533018,"sku":"114403","price":34.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114403in3.jpg?v=1762874435"},{"product_id":"impressart®-design-stamp-set-lowercase-bridgette-alphabet-3mm-characters","title":"ImpressArt® Design Stamp Set, Lowercase Bridgette Alphabet, Characters","description":"\u003cp\u003eQuickly add decorative lettering or custom phrases to your jewelry designs with this ImpressArt® alphabet design stamp set. These stamps have straight shanks and are perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. Each stamp is labeled on its side for easy identification and orientation. This set includes the complete alphabet (A–Z) plus seven additional shapes and punctuation marks and comes in a slotted case (6-3\/4\"W x 2-1\/2\"D x 3-1\/4\"H) with clear lid for easy, organized storage.\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50678229926234,"sku":"114419","price":95.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114419in5.jpg?v=1762880830"},{"product_id":"impressart®-whimsy-heart-design-stamp-3mm-character","title":"ImpressArt® Whimsy Heart Design Stamp, Character","description":"\u003cp\u003eQuickly add decorative details to your jewelry with this ImpressArt® design stamp. The stamp has a straight shank and is perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. This stamp is labeled on its side for easy identification and orientation.\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50678231368026,"sku":"114479","price":10.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114479.jpg?v=1762880761"},{"product_id":"impressart®-fun-star-design-stamp-3mm-character","title":"ImpressArt® Fun Star Design Stamp, Character","description":"\u003cp\u003eQuickly add decorative details to your jewelry with this ImpressArt® design stamp. The stamp has a straight shank and is perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. This stamp is labeled on its side for easy identification and orientation.\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50678231925082,"sku":"114498","price":10.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114498.jpg?v=1762943129"},{"product_id":"impressart®-whimsy-flower-design-stamp-6mm-character","title":"ImpressArt® Whimsy Flower Design Stamp, Character","description":"\u003cp\u003eQuickly add decorative details to your jewelry with this ImpressArt® design stamp. The stamp has a straight shank and is perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. This stamp is labeled on its side for easy identification and orientation.\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50678232547674,"sku":"114542","price":11.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114542.jpg?v=1763410456"},{"product_id":"impressart®-snowflake-design-stamp-3mm-character","title":"ImpressArt® Snowflake Design Stamp, Character","description":"\u003cp\u003eQuickly add decorative details to your jewelry with this ImpressArt® design stamp. The stamp has a straight shank and is perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. This stamp is labeled on its side for easy identification and orientation.\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50678233235802,"sku":"114625","price":11.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114625.jpg?v=1762943157"},{"product_id":"impressart®-crescent-moon-design-stamp-6mm-character","title":"ImpressArt® Crescent Moon Design Stamp, Character","description":"\u003cp\u003eQuickly add decorative details to your jewelry with this ImpressArt® design stamp. The stamp has a straight shank and is perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. This stamp is labeled on its side for easy identification and orientation.\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50678233596250,"sku":"114634","price":11.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114634.jpg?v=1762890388"},{"product_id":"impressart®-angled-solid-star-design-stamp-3mm-character","title":"ImpressArt® Angled Solid Star Design Stamp, Character","description":"\u003cp\u003eQuickly add decorative details to your jewelry with this ImpressArt® design stamp. The stamp has a straight shank and is perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. This stamp is labeled on its side for easy identification and orientation.\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50678233792858,"sku":"114635","price":10.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114635.jpg?v=1762880705"},{"product_id":"impressart®-jewelers-hammer-design-stamp-6mm-character","title":"ImpressArt® Jeweler's Hammer Design Stamp, 6mm Character","description":"Jeweler-inspired ImpressArt® stamps are cut from hardened steel, with a straight shank; tested for Rockwell hardness and perfect alignment. Stamp soft metals including brass, copper, nickel silver, gold, silver and aluminum.\n\nDesigned to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrice Per Unit:\u003c\/strong\u003e Priced per Each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 66.5 x 9.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6mm (1\/4\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e ImpressArt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 1.743 ounces (49.4g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry Of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.049 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50678234743130,"sku":"114649","price":13.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114649_b381270c-f5b3-4602-b8e1-e8bd3f8497dd.jpg?v=1741587699"},{"product_id":"impressart®-jewelers-hand-saw-design-stamp-6mm-character","title":"ImpressArt® Jeweler's Hand Saw Design Stamp, Character","description":"\u003cp\u003eQuickly add decorative details to your jewelry with this ImpressArt® design stamp. The stamp has a straight shank and is perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. This stamp is labeled on its side for easy identification and orientation.\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50678235431258,"sku":"114653","price":10.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114653.jpg?v=1762943188"},{"product_id":"impressart®-jewelers-torch-design-stamp-6mm-character","title":"ImpressArt® Jeweler's Torch Design Stamp, Character","description":"\u003cp\u003eQuickly add decorative details to your jewelry with this ImpressArt® design stamp. The stamp has a straight shank and is perfect for marking flat surfaces such as quality or brand tags, discs, stampings and other components. This stamp is labeled on its side for easy identification and orientation.\n\nImpressArt® stamps are cut from hardened steel and tested for Rockwell hardness and perfect alignment. They are great for stamping soft metals including brass, copper, nickel silver, gold, silver and aluminum. Stamps with a straight shank have a flat tip face that's perpendicular to the tool shank. Designed to work perfectly with the specially made Ergo-Angle™ stamping hammer and Simple Strike Jig™ (each available separately), these stamps are durable, providing consistent metal-stamping success when creating custom, personalized jewelry items.\n\nFor best results—and because any stamped mark is not easy to remove once it's made—it's important to practice before attempting to mark your jewelry designs. Scrap pieces of sheet or flat base metal components are ideal for helping you get the feel of both the stamp and the power needed for an effective hammer strike. Use a brass mallet to strike the stamp to help prevent damage to your stamp, and support your workpiece on a bench block or an anvil. Finally, do your stamping before setting stones so that there is no risk of damaging settings or loosening set stones.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50678236250458,"sku":"114655","price":10.91,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114655.jpg?v=1763567416"},{"product_id":"impressart®-ergo-angle™-hammer-for-impressart®-design-stamps","title":"ImpressArt® Ergo-Angle™ Hammer for ImpressArt® Design Stamps","description":"\u003cp\u003eDesigned specifically for use with any ImpressArt® design stamp, the ImpressArt Ergo-Angle™ stamping hammer provides maximum control, comfort and optimal positioning for making clean and even impressions in stamping blanks. A one-pound brass head gives you the weight you need to create deep impressions, while the soft striking surface helps to eliminate double impressions. The round flat face (1-1\/8\" diameter) is made of brass and is removable; replacement faces are available separately. Combine the hammer, ImpressArt Stamp Straight Tape and the Simple Strike jig (each available separately) for consistent metal-stamping success when creating personalized stamped jewelry items.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50678237331802,"sku":"114692","price":32.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114692.jpg?v=1762868546"},{"product_id":"impressart®-ergo-angle™-hammer-replacement-head","title":"ImpressArt® Ergo-Angle™ Hammer Replacement Head","description":"\u003cp\u003eThis brass replacement head is made for the ImpressArt® Ergo-Angle™ hammer.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50678237561178,"sku":"114693","price":16.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114693.jpg?v=1762881422"},{"product_id":"impressart®-simple-strike-jig-for-6mm-design-stamps","title":"ImpressArt® Simple Strike Jig for Design Stamps","description":"\u003cp\u003eThe ImpressArt® Simple Strike jig is designed to help you produce perfectly stamped impressions by holding your design stamp vertical and flush to the item being stamped, while protecting your fingers from the hammer.\n\nSimply insert any 6mm ImpressArt design stamp into the jig, then use the ImpressArt® Ergo-Angle™ hammer to make clean and consistent impressions in your jewelry items. A 6mm heart design stamp is included. The jig accommodates a 9.5mm shank stamp. ImpressArt Stamp Straight Tape™ (available separately) provides a temporary guide on your workpiece for perfectly aligned letters or symbols.\u003c\/p\u003e","brand":"ImpressArt","offers":[{"title":"Default Title","offer_id":50678237725018,"sku":"114696","price":22.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114696.jpg?v=1762874451"}],"url":"https:\/\/www.amadesa.com\/collections\/stamp-marking-tools.oembed?page=2","provider":"Amadesa","version":"1.0","type":"link"}