{"title":"Needle Files","description":"\u003cp\u003eNeedle files are small, precision hand files used for detailed shaping, smoothing and refining work-in-progress jewelry. They offer excellent control in tight areas where larger files are too aggressive. Ideal for fitting parts, cleaning edges, and finishing fine details during fabrication and bench work.\u003c\/p\u003e","products":[{"product_id":"glardon-vallorbe®-barrette-needle-file-cut-3","title":"Glardon Vallorbe® Barrette Needle File, Cut #3","description":"This Glardon Vallorbe® barrette needle file is ideal for refining flat surfaces as well as narrow areas, straight edges and structures, and outside curves. It has a broad-based triangle shape that tapers in width and thickness, and has teeth only on the bottom surface; the file is double-cut. The safe back prevents removal of metal from adjacent surfaces.\n\nThis file has a Swiss cut #3; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrice Per Unit:\u003c\/strong\u003e Priced per Each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 200mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Needle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Barrette\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwiss Cut:\u003c\/strong\u003e #3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Surface Dimension:\u003c\/strong\u003e 4\"L (101.6mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.459 ounces (13g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry Of Origin:\u003c\/strong\u003e Switzerland\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Glardon Vallorbe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.013 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50633767911770,"sku":"114355","price":18.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114355_cd12c763-eef6-4717-9571-0e1baf9fa199.jpg?v=1741466392"},{"product_id":"needle-file-set-with-wood-handles-set-of-6","title":"Needle File Set with Wood Handles, Set of 6","description":"\u003cp\u003eThis set of needle key files includes six commonly used shapes, ensuring you have the one you need. Each file is double-cut and has an erogonomic wood handle. Made in Germany. This file has a German cut #0; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50633768534362,"sku":"114500","price":20.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114500.jpg?v=1741466591"},{"product_id":"needle-file-set-cuts-0-and-2-set-of-12","title":"Needle File Set, Cuts #0 and #2, Set of 12","description":"\u003cp\u003eThis 12-piece set of needle files includes a variety of commonly used shapes in both Swiss cut #0 and #2. Having two cuts of each file shape on hand makes it easy to progress from more aggressive material removal to refined, finishing work. This set of double-cut needle files includes two each (Swiss #0 cut and #2 cut) of the following shapes: equalling, round, half-round, barrette, three-square and square. A vinyl storage pouch is included. These files have a Swiss cut #0 and #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50633770271066,"sku":"114845","price":84.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114845.jpg?v=1741467321"},{"product_id":"glardon-vallorbe®-crossing-needle-file-cut-2","title":"Glardon Vallorbe® Crossing Needle File, Cut #2","description":"\u003cp\u003eThis Glardon Vallorbe® crossing needle file features a double half-round shape—each with a different radius—and is an ideal choice for filling inside ring shanks and other curved interior surfaces. The double-cut file tapers to a point in width and thickness along its length. Along the edges, the curved sides meet at a sharp angle. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50633771417946,"sku":"114978","price":15.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114978.jpg?v=1741468281"},{"product_id":"glardon-vallorbe®-barrette-needle-file-cut-5","title":"Glardon Vallorbe® Barrette Needle File, Cut #2","description":"\u003cp\u003eThis Glardon Vallorbe® barrette needle file is ideal for refining flat surfaces as well as narrow areas, straight edges and structures, and outside curves. It has a broad-based triangle shape that tapers in width and thickness, and has teeth only on the bottom surface; the file is double-cut. The safe back prevents removal of metal from adjacent surfaces. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50633771450714,"sku":"114999","price":10.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114999.jpg?v=1741468348"},{"product_id":"ultra-thin-micro-flex-file-fine","title":"Ultra-Thin Micro-Flex File, Fine","description":"This ultra-thin micro-flex file is ideal for shaping and smoothing curves, and its incredible flexibility enables you to readily access fine details and other hard-to-reach areas. This file has fine, double-cut teeth (128 teeth per 25mm of length) and is .5mm thick.A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 140mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Surface Dimension:\u003c\/strong\u003e 1.77\"L x .24\"W (44.96 x 6.1mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh:\u003c\/strong\u003e Fine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.889 ounces (25.2g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry Of Origin:\u003c\/strong\u003e Japan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.025 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amadesa","offers":[{"title":"Fine","offer_id":50648407114074,"sku":"114038","price":40.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114038in_b930c7f3-67d7-43e1-9937-823530a51b76.jpg?v=1741587337"},{"product_id":"ultra-thin-micro-flex-file-medium","title":"Ultra-Thin Micro-Flex File, Medium","description":"This ultra-thin micro-flex file is ideal for shaping and smoothing curves, and its incredible flexibility enables you to readily access fine details and other hard-to-reach areas. This file has medium, double-cut teeth (70 teeth per 25mm of length) and is .5mm thick.A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 140mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Surface Dimension:\u003c\/strong\u003e 1.77\"L x .24\"W (44.96 x 6.1mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh:\u003c\/strong\u003e Medium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.889 ounces (25.2g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry Of Origin:\u003c\/strong\u003e Japan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.025 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50678197977434,"sku":"114039","price":19.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114039in_6e69a542-6fc7-4d4f-bb54-5bb27f7aadae.jpg?v=1741587345"},{"product_id":"pocket-needle-file-set-cut-2-set-of-6","title":"Pocket Needle File Set, Cut #2, Set of 6","description":"This pocket set of needle files offers six files with shortened shanks that provide more cutting area and better control when filing; they are ideal for accessing fine details. This set ensures you have the file shape you need for all of your jewelry designs, and the hollow barrel of the anodized aluminum handle doubles as a convenient holder for unused files. To use, insert a file into the handle collet for quick, easy file changes. This set includes one each of the following shapes: equalling, round, half-round, barrette, three-square and square.\n\nThese files have a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal.\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrice Per Unit:\u003c\/strong\u003e Priced per Each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 101mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Needle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Assortment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwiss Cut:\u003c\/strong\u003e #2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Surface Dimension:\u003c\/strong\u003e 2.25\"L (57.15mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 3.094 ounces (87.724g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry Of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.088 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50678219604314,"sku":"114260","price":33.71,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114260_910ac28f-5dda-4beb-bcd6-b1ba660e5984.jpg?v=1741587545"},{"product_id":"pocket-needle-file-set-cut-2-set-of-7","title":"Pocket Needle File Set, Cut #2, Set of 6","description":"\u003cp\u003eThis pocket set of needle files offers six files with shortened shanks that provide more cutting area and better control when filing; they are ideal for accessing fine details. This set ensures you have the file shape you need for all of your jewelry designs, and the hollow barrel of the anodized aluminum handle doubles as a convenient holder for unused files. To use, insert a file into the handle collet for quick, easy file changes. This set includes one each of the following shapes: equalling, round, half-round, barrette, three-square and square.\n\nThese files have a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50678219931994,"sku":"114262","price":18.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114262.jpg?v=1764174632"},{"product_id":"friedrich-dick-knife-needle-file-cut-5","title":"Friedrich Dick Knife Needle File, Cut #5","description":"\u003cp\u003eThis Friedrich Dick knife needle file is ideal for accessing narrow openings, angled joints and small features such as prongs. It has flat sides and edges with one edge thicker than the other so that the sides angle inward. With teeth on both sides and on the narrow edge, this double-cut file tapers to a fine point. The smooth wider edge helps protect set stones and adjacent structures against incidental contact with cutting surfaces. This file has a German cut #5; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"Default Title","offer_id":50678240346458,"sku":"114745","price":11.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114745.jpg?v=1763189329"},{"product_id":"grobet®-swiss-pattern-needle-files-cut-4-set-of-12","title":"Grobet® Swiss Pattern Needle Files, Cut #4, Set of 12","description":"\u003cp\u003eThis 12-piece set of needle files includes common file shapes and ensures you have the file shape you need for all of your jewelry designs. This assortment contains one of each file: barrette, crossing, equalling, half-round, joint round-edge, knife, marking, round, splitting, square, three-square and warding. These files have a Swiss cut #4; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"Default Title","offer_id":50678244049242,"sku":"114773","price":126.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114773.jpg?v=1764174737"},{"product_id":"friedrich-dick-needle-file-set-cut-2-set-of-6","title":"Friedrich Dick Needle File Set, Cut #2, Set of 6","description":"\u003cp\u003eThis set of Friedrich Dick needle files includes an assortment of the six most commonly used file shapes and ensures you have the file shape you need for all of your jewelry designs. Each file has a comfort-grip handle with a rotating end knob that provides excellent maneuverability, tool safety, and comfort when filing. This set of double-cut needle files includes one of each file shape: equalling, round, half-round, barrette, three-square and square. A plastic storage sleeve is included.\n\nThese files have a German cut #2; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal.\n\nAmong the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"Default Title","offer_id":50678247653722,"sku":"114816","price":85.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114816.jpg?v=1764217702"},{"product_id":"glardon-vallorbe®-needle-file-set-cut-2-set-of-12","title":"Glardon Vallorbe® Needle File Set, Cut #2, Set of 12","description":"\u003cp\u003eThis set of Glardon Vallorbe® precision needle files includes an assortment of 12 file shapes and ensures you have the file shape you need for all of your jewelry designs. Each double-cut file allows you to access and refine narrow grooves and surfaces that are unreachable by larger files. This set of needle files includes one of each file shape: three-square, round, square, crochet, knife, oval, half-round, equalling, crossing, barrette, warding, and equalling (round edge).\n\nThese files have a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. In all cut styles, the higher the number, the finer its cut.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50678279078234,"sku":"114933","price":139.38,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114933.jpg?v=1764174819"},{"product_id":"glardon-vallorbe®-equalling-needle-file-cut-2","title":"Glardon Vallorbe® Equalling Needle File, Cut #2","description":"\u003cp\u003eThis Glardon Vallorbe® equalling needle file is ideal for shaping slots and corners, for smoothing and refining flat surfaces and for shaping openings. Flat with parallel sides and edges, the double-cut file has teeth on top and bottom surfaces and both edges. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50678290612570,"sku":"114972","price":10.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114972.jpg?v=1763118692"},{"product_id":"glardon-vallorbe®-knife-needle-file-cut-3","title":"Glardon Vallorbe® Knife Needle File, Cut #2","description":"\u003cp\u003eThis Glardon Vallorbe® knife needle file is ideal for accessing narrow openings, angled joints and small features such as prongs. It has flat sides and edges with one edge thicker than the other so that the sides angle inward. With teeth on both sides and on the narrow edge, this double-cut file tapers to a fine point. The smooth wider edge helps protect set stones and adjacent structures against incidental contact with cutting surfaces. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50678291038554,"sku":"114981","price":12.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114981.jpg?v=1762884493"},{"product_id":"glardon-vallorbe®-warding-needle-file-cut-2","title":"Glardon Vallorbe® Warding Needle File, Cut #2","description":"\u003cp\u003eThis Glardon Vallorbe® warding (entering) needle file is ideal for shaping slots and corners, for removing burrs, for shaping narrow openings, and for making notches. The file is flat and somewhat thinner than a flat file, with parallel sides and edges that taper in width to a point; it has teeth on the top, bottom and both edges. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50678291169626,"sku":"114984","price":11.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114984.jpg?v=1763118815"},{"product_id":"glardon-vallorbe®-three-square-needle-file-cut-2","title":"Glardon Vallorbe® Three-Square Needle File, Cut #2","description":"\u003cp\u003eThis Glardon Vallorbe® three-square (triangle) needle file is ideal for filing corners, edges, sharp angles and creases or folds; it is also useful for shaping the prongs on marquise- or pear-cut settings. The file has three flat sides of equal width that taper to a fine point, and the edges are rounded to protect adjacent structures as you file. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50678291235162,"sku":"114987","price":11.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114987.jpg?v=1763118871"},{"product_id":"glardon-vallorbe®-square-needle-file-cut-3","title":"Glardon Vallorbe® Square Needle File, Cut #2","description":"\u003cp\u003eThis Glardon Vallorbe® square needle file is ideal for scoring lines when creating bends and for forming, smoothing or refining 90° angles. The file is uniform in width and thickness, tapers to a fine point, and has teeth on all four sides. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50678291497306,"sku":"114990","price":12.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114990.jpg?v=1763119067"},{"product_id":"glardon-vallorbe®-oval-needle-file-cut-2","title":"Glardon Vallorbe® Oval Needle File, Cut #2","description":"\u003cp\u003eThis Glardon Vallorbe® oval needle file is ideal for filing interior curved surfaces, openings and detailed contours. It is fully rounded with teeth all around the file; the width and thickness of the file taper to a fine point. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":50678291562842,"sku":"114993","price":12.22,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114993.jpg?v=1762884510"},{"product_id":"glardon-vallorbe®-round-edge-pillar-needle-file-cut-2","title":"Glardon Vallorbe® Round-Edge Pillar Needle File, Cut #2","description":"\u003cp\u003eThis Glardon Vallorbe® rounded pillar needle file is thicker (relative to its width) than other flat file shapes and is ideal for narrow, squared-off spaces, slots with rounded ends and interior curves. The file has double-cut teeth on the flat sides and single-cut teeth on the rounded edges; the file tapers slightly toward the tip. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other; single-cut (cross-cut) files feature evenly spaced rows of teeth that all cut in the same direction, from the end or point of the file toward the tang or handle of the file (the forward stroke). Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":52648279376218,"sku":"114053","price":11.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114053.jpg?v=1762660556"},{"product_id":"glardon-vallorbe®-valtitan®-three-square-needle-file","title":"Glardon Vallorbe® Valtitan® Three-Square Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® Valtitan® three-square (triangle) needle file is ideal for filing corners, edges, sharp angles, creases or folds, and for shaping the prongs on marquise- or pear-cut settings. It is highly recommended for working with platinum and other hard metals. The file has three flat sides of equal width that taper to a fine point, and the edges are rounded to protect adjacent structures as you file.\n\nValtitan® files deliver better performance on hard-to-file surfaces (such as platinum and titanium), have great corrosion resistance and long service life. Valtitan files are specially treated for hardness (72 HRC, the hardest steel file available). The teeth on these files resist metal accumulation so that a quick, sharp knock is usually enough to clear them.\n\nThis file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#0","offer_id":52648281669978,"sku":"114960","price":20.36,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52648281702746,"sku":"114947","price":20.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114960.jpg?v=1762314558"},{"product_id":"friedrich-dick-barrette-needle-file","title":"Friedrich Dick Barrette Needle File","description":"\u003cp\u003eThis Friedrich Dick barrette needle file is ideal for refining flat surfaces as well as narrow areas, straight edges and structures, and outside curves. It has a broad-based triangle shape that tapers in width and thickness, and has teeth only on the bottom surface; the file is double-cut. The safe back prevents removal of metal from adjacent surfaces. This file has a German cut #2; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652269666650,"sku":"114755","price":11.19,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652269699418,"sku":"114756","price":11.19,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652269732186,"sku":"114757","price":11.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114757.jpg?v=1763118946"},{"product_id":"friedrich-dick-needle-file-sets-set-of-12","title":"Friedrich Dick Needle File Sets, Set of 12","description":"\u003cp\u003eThis set of Friedrich Dick needle files includes an assortment of 12 commonly used file shapes and ensures you have the file shape you need for all of your jewelry designs. A covered stand holds the double-cut files upright on your bench and helps protect them from humidity and acid fumes. This set of needle files includes one of each file shape: warding, equalling, round-edge pillar, crochet, round, half-round, barrette, crossing, slitting, knife, three-square and square.\n\nThese files have a German cut #3; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nAmong the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652280086874,"sku":"114764","price":117.21,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652280119642,"sku":"114765","price":117.57,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652280152410,"sku":"114766","price":117.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114764.jpg?v=1762344208"},{"product_id":"glardon-vallorbe®-needle-buffing-files-g10-set-of-6","title":"Glardon Vallorbe® Needle Buffing Files, G10, Set of 6","description":"\u003cp\u003ePre-polish and precisely finish the intricate details of your most delicate pieces. This set of G10 needle buffing files from Glardon Vallorbe® has a composite coating of synthetic diamond particles and is ideal for smoothing tiny details and accessing hard-to-reach areas. The hard coating makes these buff files great for use on a variety of materials—including all precious metals, titanium, steel and even enamel—and delivers a long service life. This set includes six commonly used file shapes in a plastic carrying case to help keep your bench organized.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":52652288967002,"sku":"114037","price":175.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114037.jpg?v=1762344267"},{"product_id":"needle-file-set-set-of-12","title":"Needle File Set, Set of 12","description":"\u003cp\u003eThis 12-piece set of needle files is an economical option for beginners and for those interested in trying a variety of file shapes before investing in higher-quality files. This set ensures you have the file shape you need for all of your jewelry designs. This assortment contains two files each of: warding, equalling and round; one file each of half-round, barrette, crossing, knife and three-square. Shapes included in the assortment may vary. These files have a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652294013274,"sku":"114258","price":14.19,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652294046042,"sku":"114257","price":14.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114258.jpg?v=1762344306"},{"product_id":"friedrich-dick-half-round-needle-file","title":"Friedrich Dick Half-Round Needle File","description":"\u003cp\u003eThis Friedrich Dick half-round needle file is ideal for refining both flat and curved surfaces. It has one flat and one rounded side with teeth on both; the file width tapers to a point. The tapering width and the fine point allow it to access crevices and small openings and details, corners and the inside of ring shanks and bezels. This file has a German cut #2; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652324815194,"sku":"114746","price":12.25,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652324847962,"sku":"114747","price":12.06,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652324880730,"sku":"114748","price":12.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114747.jpg?v=1762344390"},{"product_id":"friedrich-dick-crossing-needle-file-cut-5","title":"Friedrich Dick Crossing Needle File, Cut #5","description":"\u003cp\u003eThis Friedrich Dick crossing needle file features a double half-round shape—each with a different radius—and is an ideal choice for filling inside ring shanks and other curved interior surfaces. The double-cut file tapers to a point in width and thickness along its length. Along the edges, the curved sides meet at a sharp angle.\n\nThis file has a German cut #5; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nAmong the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"Default Title","offer_id":52652334186842,"sku":"114754","price":13.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114754.jpg?v=1762344444"},{"product_id":"friedrich-dick-needle-file-set-set-of-6","title":"Friedrich Dick Needle File Set, Set of 6","description":"\u003cp\u003eThis set of Friedrich Dick needle files includes an assortment of the six most commonly used file shapes and ensures you have the file shape you need for all of your jewelry designs. This set of double-cut needle files includes one of each file shape: equalling, round, half-round, barrette, three-square, and square. These files have a German cut #2; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652343525722,"sku":"11479301","price":72.69,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652343558490,"sku":"11479401","price":72.71,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652343591258,"sku":"11479601","price":72.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11479301.jpg?v=1762344496"},{"product_id":"glardon-vallorbe®-equalling-needle-file","title":"Glardon Vallorbe® Equalling Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® equalling needle file is ideal for shaping slots and corners, for smoothing and refining flat surfaces and for shaping openings. The file is flat with parallel sides and edges; this double-cut file has teeth on all four surfaces.\n\nThis file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652360368474,"sku":"114325","price":12.18,"currency_code":"EUR","in_stock":true},{"title":"#00","offer_id":52652360401242,"sku":"114324","price":12.18,"currency_code":"EUR","in_stock":true},{"title":"#1","offer_id":52652360434010,"sku":"114326","price":13.08,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652360466778,"sku":"114327","price":12.18,"currency_code":"EUR","in_stock":true},{"title":"#4","offer_id":52652360499546,"sku":"114328","price":14.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114325in.jpg?v=1762884373"},{"product_id":"glardon-vallorbe®-three-square-needle-file","title":"Glardon Vallorbe® Three-Square Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® three-square (triangle) needle file is ideal for filing corners, edges, sharp angles and creases or folds; it is also useful for shaping the prongs on marquise- or pear-cut settings. The file has three flat sides of equal width that taper to a fine point, and the edges are rounded to protect adjacent structures as you file.\n\nThis file has a Swiss cut #00; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652377112922,"sku":"114340","price":14.26,"currency_code":"EUR","in_stock":false},{"title":"#00","offer_id":52652377145690,"sku":"114339","price":13.61,"currency_code":"EUR","in_stock":true},{"title":"#1","offer_id":52652377178458,"sku":"114341","price":13.61,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652377211226,"sku":"114342","price":13.6,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652377243994,"sku":"114343","price":15.68,"currency_code":"EUR","in_stock":true},{"title":"#4","offer_id":52652377276762,"sku":"114344","price":15.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114339in.jpg?v=1763070573"},{"product_id":"friedrich-dick-equalling-needle-file","title":"Friedrich Dick Equalling Needle File","description":"\u003cp\u003eThis Friedrich Dick equalling needle file is ideal for shaping slots and corners, for smoothing and refining flat surfaces and for shaping openings. Flat with parallel sides and edges, the double-cut file has teeth on top and bottom surfaces and both edges. This file is also available in a set of six or 12 (available separately). This file has a German cut #2; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652398379354,"sku":"114749","price":10.04,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652398412122,"sku":"114750","price":10.04,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652398444890,"sku":"114751","price":10.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114749.jpg?v=1763118668"},{"product_id":"glardon-vallorbe®-valtitan®-half-round-needle-file","title":"Glardon Vallorbe® Valtitan® Half-Round Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® Valtitan® half-round needle file is ideal for refining both flat and curved surfaces; it is highly recommended for working with platinum and other hard metals. It has one flat and one rounded side with teeth on both; the file width tapers to a point. The tapering width and the fine point allow it to access crevices and small openings and details, corners and the inside of ring shanks and bezels.\n\nThis file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nValtitan® files deliver better performance on hard-to-file surfaces (such as platinum and titanium), have great corrosion resistance and long service life. Valtitan files are specially treated for hardness (72 HRC, the hardest steel file available). The teeth on these files resist metal accumulation so that a quick, sharp knock is usually enough to clear them.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#0","offer_id":52652404310362,"sku":"114945","price":24.59,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652404343130,"sku":"114946","price":24.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114945.jpg?v=1762344905"},{"product_id":"glardon-vallorbe®-valtitan™-needle-file-sets-set-of-6","title":"Glardon Vallorbe® Valtitan™ Needle File Sets, Set of 6","description":"\u003cp\u003eThis set of Glardon Vallorbe® Valtitan® needle files includes six commonly used file shapes and is highly recommended for working with platinum and other hard metals. This set of double-cut needle files ensures you have the file shape you need for all of your jewelry designs. This file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. Valtitan® files deliver better performance on hard-to-file surfaces (such as platinum and titanium), have great corrosion resistance and long service life. Valtitan files are specially treated for hardness (72 HRC, the hardest steel file available). The teeth on these files resist metal accumulation so that a quick, sharp knock is usually enough to clear them. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#0","offer_id":52652409422170,"sku":"114952","price":117.34,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652409454938,"sku":"114953","price":117.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114952.jpg?v=1762344959"},{"product_id":"glardon-vallorbe®-half-round-needle-file","title":"Glardon Vallorbe® Half-Round Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® half-round needle file is ideal for refining both flat and curved surfaces. It has one flat and one rounded side with teeth on both; the file width tapers to a point. The tapering width and the fine point allow it to access crevices and small openings and details, corners and the inside of ring shanks and bezels. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#1","offer_id":52652421480794,"sku":"114174","price":13.56,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652421513562,"sku":"114975","price":13.77,"currency_code":"EUR","in_stock":true},{"title":"#4","offer_id":52652421546330,"sku":"114976","price":13.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114174.jpg?v=1763070762"},{"product_id":"friedrich-dick-needle-file-set-set-of-5","title":"Friedrich Dick Needle File Set, Set of 5","description":"\u003cp\u003eThis set of Friedrich Dick needle files includes an assortment of the five most commonly used file shapes and ensures you have the file shape you need for all of your jewelry designs. This set of double-cut needle files includes one of each file shape: equalling, round, half-round, barrette, and three-square. These files have a German cut #3; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#3","offer_id":52652430524762,"sku":"11477401","price":69.38,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652430557530,"sku":"11477601","price":72.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/11477401.jpg?v=1762345093"},{"product_id":"friedrich-dick-round-needle-file","title":"Friedrich Dick Round Needle File","description":"\u003cp\u003eThis Friedrich Dick round (rat-tail) needle file is ideal for enlarging, defining and smoothing holes, openings and small-radius curves, and for smoothing and refining tubing or fine round or concave structures. The file tapers to a fine point and has teeth around its entire surface. This file has a German cut #2; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652438585690,"sku":"114737","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652438618458,"sku":"114738","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652438651226,"sku":"114739","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114737.jpg?v=1762345148"},{"product_id":"glardon-vallorbe®-knife-needle-file","title":"Glardon Vallorbe® Knife Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® knife needle file is ideal for accessing narrow openings, angled joints and small features such as prongs. It has flat sides and edges with one edge thicker than the other so that the sides angle inward. With teeth on both sides and on the narrow edge, this double-cut file tapers to a fine point. The smooth wider edge helps protect set stones and adjacent structures against incidental contact with cutting surfaces.\n\nThis file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652452086106,"sku":"114337","price":15.73,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652452118874,"sku":"114338","price":15.73,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114337.jpg?v=1762345229"},{"product_id":"glardon-vallorbe®-barrette-needle-file","title":"Glardon Vallorbe® Barrette Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® barrette needle file is ideal for refining flat surfaces as well as narrow areas, straight edges and structures, and outside curves. It has a broad-based triangle shape that tapers in width and thickness, and has teeth only on the bottom surface; the file is double-cut. The safe back prevents removal of metal from adjacent surfaces.\n\nThis file has a Swiss cut #1; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652463620442,"sku":"114352","price":13.6,"currency_code":"EUR","in_stock":true},{"title":"#00","offer_id":52652463653210,"sku":"114351","price":13.6,"currency_code":"EUR","in_stock":true},{"title":"#1","offer_id":52652463685978,"sku":"114353","price":13.62,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652463718746,"sku":"114354","price":13.6,"currency_code":"EUR","in_stock":true},{"title":"#4","offer_id":52652463751514,"sku":"114356","price":16.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114351in.jpg?v=1763070644"},{"product_id":"glardon-vallorbe®-round-needle-file","title":"Glardon Vallorbe® Round Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® round (rat-tail) needle file is ideal for enlarging, defining and smoothing holes, openings and small-radius curves, and for smoothing and refining tubing or fine round or concave structures. The file tapers to a fine point and has teeth around its entire surface.\n\nThis file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652481085786,"sku":"114348","price":12.15,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652481118554,"sku":"114349","price":12.15,"currency_code":"EUR","in_stock":true},{"title":"#4","offer_id":52652481151322,"sku":"114350","price":13.11,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114350.jpg?v=1762618932"},{"product_id":"friedrich-dick-safe-edge-barrette-needle-file","title":"Friedrich Dick Safe-Edge Barrette Needle File","description":"\u003cp\u003eThis Friedrich Dick barrette needle file is ideal for refining flat surfaces as well as narrow areas, straight edges and structures, and outside curves. It has a broad-based triangle shape that tapers in width and thickness, and has teeth only on the bottom surface; the file is double-cut. Similar to barrette hand files, the triangular top of this file is ground smooth, leaving a flat, smooth upper surface with polished safety edges. The safe back and rounded edges of the file prevent removal of metal from adjacent surfaces and won't mar or damage delicate features such as prongs and undercuts. This file has a German cut #3; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652488065370,"sku":"1147551","price":20.49,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652488098138,"sku":"1147561","price":20.49,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652488130906,"sku":"1147571","price":21.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/1147551in1.jpg?v=1762345498"},{"product_id":"glardon-vallorbe®-half-round-needle-file-1","title":"Glardon Vallorbe® Half-Round Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® half-round needle file is ideal for refining both flat and curved surfaces. It has one flat and one rounded side with teeth on both; the file width tapers to a point. The tapering width and the fine point allow it to access crevices and small openings and details, corners and the inside of ring shanks and bezels.\n\nThis file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652495143258,"sku":"114330","price":16.4,"currency_code":"EUR","in_stock":false},{"title":"#00","offer_id":52652495176026,"sku":"114329","price":16.4,"currency_code":"EUR","in_stock":true},{"title":"#1","offer_id":52652495208794,"sku":"114331","price":16.4,"currency_code":"EUR","in_stock":false},{"title":"#2","offer_id":52652495241562,"sku":"114332","price":18.28,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652495274330,"sku":"114333","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"#4","offer_id":52652495307098,"sku":"114334","price":19.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114332in.jpg?v=1763042945"},{"product_id":"glardon-vallorbe®-crossing-needle-file","title":"Glardon Vallorbe® Crossing Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® crossing needle file features a double half-round shape—each with a different radius—and is an ideal choice for filling inside ring shanks and other curved interior surfaces. The double-cut file tapers to a point in width and thickness along its length. Along the edges, the curved sides meet at a sharp angle.\n\nThis file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652506120538,"sku":"114335","price":19.59,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652506153306,"sku":"114336","price":19.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114335.jpg?v=1762345711"},{"product_id":"glardon-vallorbe®-valtitan®-equalling-needle-file","title":"Glardon Vallorbe® Valtitan® Equalling Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® Valtitan® equalling needle file is ideal for shaping slots and corners, for smoothing and refining flat surfaces and for shaping openings; it is highly recommended for working with platinum and other hard metals. Flat with parallel sides and edges, the double-cut file has teeth on top and bottom surfaces and both edges.\n\nThis file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nValtitan® files deliver better performance on hard-to-file surfaces (such as platinum and titanium), have great corrosion resistance and long service life. Valtitan files are specially treated for hardness (72 HRC, the hardest steel file available). The teeth on these files resist metal accumulation so that a quick, sharp knock is usually enough to clear them.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#0","offer_id":52652513886554,"sku":"114959","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652513919322,"sku":"114944","price":19.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114944.jpg?v=1762345764"},{"product_id":"glardon-vallorbe®-square-needle-file","title":"Glardon Vallorbe® Square Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® square needle file is ideal for scoring lines when creating bends and for forming, smoothing or refining 90° angles. The file is uniform in width and thickness, tapers to a fine point, and has teeth on all four sides.\n\nThis file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Amadesa","offers":[{"title":"#0","offer_id":52652519948634,"sku":"114345","price":15.68,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652519981402,"sku":"114346","price":16.8,"currency_code":"EUR","in_stock":true},{"title":"#4","offer_id":52652520014170,"sku":"114347","price":18.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114345in.jpg?v=1763118750"},{"product_id":"friedrich-dick-square-needle-file","title":"Friedrich Dick Square Needle File","description":"\u003cp\u003eThis Friedrich Dick square needle file is ideal for scoring lines when creating bends and for forming, smoothing or refining 90° angles. The file is uniform in width and thickness, tapers to a fine point, and has teeth on all four sides. This file has a German cut #5; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652531646810,"sku":"114734","price":12.78,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652531679578,"sku":"114735","price":12.54,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652531712346,"sku":"114736","price":12.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114734.jpg?v=1762345898"},{"product_id":"glardon-vallorbe®-valtitan®-square-needle-file","title":"Glardon Vallorbe® Valtitan® Square Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® Valtitan® square needle file is ideal for scoring lines when creating bends and for forming, smoothing or refining 90° angles; it is highly recommended for working with platinum and other hard metals. The file is uniform in width and thickness, tapers to a fine point, and has teeth on all four sides. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Valtitan® files deliver better performance on hard-to-file surfaces (such as platinum and titanium), have great corrosion resistance and long service life. Valtitan files are specially treated for hardness (72 HRC, the hardest steel file available). The teeth on these files resist metal accumulation so that a quick, sharp knock is usually enough to clear them. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#0","offer_id":52652538954074,"sku":"114948","price":20.26,"currency_code":"EUR","in_stock":false},{"title":"#2","offer_id":52652538986842,"sku":"114949","price":20.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114948.jpg?v=1763118795"},{"product_id":"glardon-vallorbe®-valtitan®-barrette-needle-file","title":"Glardon Vallorbe® Valtitan® Barrette Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® Valtitan® barrette needle file is ideal for refining flat surfaces as well as narrow areas, straight edges and structures, and outside curves; it is highly recommended for working with platinum and other hard metals. It has a broad-based triangle shape that tapers in width and thickness, and has teeth only on the bottom surface; the file is double-cut. The safe back prevents removal of metal from adjacent surfaces.\n\nThis file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut.\n\nA double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.\n\nNeedle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety.\n\nValtitan® files deliver better performance on hard-to-file surfaces (such as platinum and titanium), have great corrosion resistance and long service life. Valtitan files are specially treated for hardness (72 HRC, the hardest steel file available). The teeth on these files resist metal accumulation so that a quick, sharp knock is usually enough to clear them.\n\nThe first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#0","offer_id":52652553371994,"sku":"114942","price":20.85,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652553404762,"sku":"114943","price":19.55,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114943in.jpg?v=1763118972"},{"product_id":"glardon-vallorbe®-valtitan®-round-needle-file","title":"Glardon Vallorbe® Valtitan® Round Needle File","description":"\u003cp\u003eThis Glardon Vallorbe® Valtitan® round (rat-tail) needle file is ideal for enlarging, defining and smoothing holes, openings and small-radius curves, and for smoothing and refining tubing or fine round or concave structures; it is highly recommended for working with platinum and other hard metals. The file tapers to a fine point and has teeth around its entire surface. This file has a Swiss cut #0; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Valtitan® files deliver better performance on hard-to-file surfaces (such as platinum and titanium), have great corrosion resistance and long service life. Valtitan files are specially treated for hardness (72 HRC, the hardest steel file available). The teeth on these files resist metal accumulation so that a quick, sharp knock is usually enough to clear them. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"#0","offer_id":52652564840794,"sku":"114950","price":18.18,"currency_code":"EUR","in_stock":true},{"title":"#2","offer_id":52652564873562,"sku":"114951","price":19.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114951_281575.jpg?v=1763119047"},{"product_id":"glardon-vallorbe®-round-needle-file-cut-2","title":"Glardon Vallorbe® Round Needle File, Cut #2","description":"\u003cp\u003eThis Glardon Vallorbe® round (rat-tail) needle file is ideal for enlarging, defining and smoothing holes, openings and small-radius curves, and for smoothing and refining tubing or fine round or concave structures. The file tapers to a fine point and has teeth around its entire surface. This file has a Swiss cut #2; Swiss-cut files are graded by the number of teeth, counting teeth perpendicular to the long axis of the file. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. The first choice for most jewelers, Glardon Vallorbe® files are manufactured to the highest production standards, made in Switzerland of the finest heat-tempered chrome-alloy steel, hardened to 65 HRC. The files are precision-ground to cut quickly and accurately and to last longer than just about any other file on the market.\u003c\/p\u003e","brand":"Glardon Vallorbe","offers":[{"title":"Default Title","offer_id":52652678414682,"sku":"114996","price":9.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114996.jpg?v=1762346709"},{"product_id":"friedrich-dick-three-square-needle-file","title":"Friedrich Dick Three-Square Needle File","description":"\u003cp\u003eThis Friedrich Dick three-square (triangle) needle file is ideal for filing corners, edges, sharp angles and creases or folds; it is also useful for shaping the prongs on marquise- or pear-cut settings. The file has three flat sides of equal width that taper to a fine point, and the edges are rounded to protect adjacent structures as you file. This file has a German cut #3; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut. Needle files feature a miniature profile with a shorter cutting surface (typically about half their length) and round, narrow handles. These small files are ideal for working on fine details and in small areas of the workpiece; they're ideal when access and surface finish take priority over metal removal. Though they can be used as-is, securing the file in a handle (available separately) improves control for better precision and tool safety. Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome\/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.\u003c\/p\u003e","brand":"Friedrich Dick","offers":[{"title":"#2","offer_id":52652702204250,"sku":"114731","price":11.41,"currency_code":"EUR","in_stock":true},{"title":"#3","offer_id":52652702237018,"sku":"114732","price":11.4,"currency_code":"EUR","in_stock":true},{"title":"#5","offer_id":52652702269786,"sku":"114733","price":11.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/files\/114733.jpg?v=1762346852"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/7897\/7882\/collections\/Needle_Files.jpg?v=1762516604","url":"https:\/\/www.amadesa.com\/collections\/needle-files.oembed?page=2","provider":"Amadesa","version":"1.0","type":"link"}